Top Sellers
6 Gauge Battery Cable, Black, 25' Spool from ANCOR MARINE
Unlike welding cable or SAE wire, Ancor Marine Grade™ battery cables feature quality to last years. Tinned copper stranding for maximum protection against corrosion and electrolysis Ultra flexible (type 3) stranding resists fatigue due to vibration and flexing Premium vinyl insulation that resist salt water, battery acid, oil, gas and UV Rated at 600V and 105° C Heavy duty insulation, resistant to heat and abrasion Exceeds all UL 1426, USCG Charterboart (CFR Title 46), CSA and ABYC standards.
|
300 Amp Battery Jumper with Air Compressor from WAGAN CORP DBA/HONOR
It cranks 300 amps through its neatly stowed heavy duty booster cables to get your engine running. Its 260psi air compressor can inflate a 16" tire in 5-7 minutes, with a convenient pressure gauge to get your tires inflated just right. Five LED work light shines brightly on the work area, and indicates the state of charge in the Battery Jumper’s sealed, maintenance-free battery. Dimensions: 9"H x 9 1/4"W x 6 1/4"D . Safety Features: Short circuit protection .
|
ProTech 1220i 12V Battery Charger, 20A, 10.5"L x 6.375"W x 2.875"H from PROFESSIONAL MARINER
ProMariner’s Distributed-On-Demand™ technology automatically senses battery bank state-of-charge and distributes charging amps where they’re needed, sending 100% of available charging amps to any one bank or combination of banks. Includes battery type selector for use with flooded, AGM or Gel batteries. Batteries are fully charged and maintained without overcharging smaller engine batteries. Distributed-On-Demand™ battery sensing and distribution, Active Battery Balance Control (1240i only) .
|
Adapter Set for Lead Batteries from TORQEEDO
Adapter for connecting the Travel models to standard lead batteries with 12V (Travel 401) or 24V (Travel 801), including 3m connection cable with fuse and a short connection cable to connect two batteries in parallel (Travel 401) or in series (Travel 801).
|
DC Step-Up Converter 24V27A 10.5-28V from ANALYTIC SYSTEMS
More voltage when you need it from 12 or 24 volt batteries Step up a 12V battery to between 13. 5 and 17V or between 24V and 27. 5V increments (via three-postiion DIP switch) or stabilize 12V or 24V power systems. 5V DC or less). Applications include temporarily brightening 12V headlights or work lights, increasing voltage into an automotive or marine ignition system for hotter spark and/or prevention of failures due to voltage drop during engine start, stabilizing 12V and 24V DC power systems.
|
SeaGel Battery Group U-1, 31 Ah, 12V, 215 CCA, 575 MCA from WEST MARINE
Versatile and maintenance-free for increased installation options We recommend these batteries without hesitation. Theyre remarkably resistant to damage from deep discharges and extended storage. They can even be immersed without leaks, spills or other damage. Once charged, their low self-discharge rate allows the batteries to sit unattended an entire winter without significant power loss. Gel batteries charge at lower voltages than deep cycle or AGM, so smart regulation is advised.
|
Group 24 12V Starting Battery, 550 CCA, 650 MCA, 90 Res. Min., 34.5lb. from WEST MARINE
They feature a no-spill design that allows you to heel over to angles up to 45°. The exclusive molded-in stainless steel studs and locking hex nut terminals make connections easy, while protecting against corrosion and failure. Manufactured by East Penn, one of the most reputable battery companies in the US, these batteries receive over 250 quality control checks to guarantee superior starting performance every time. Wing nut terminals make connections easy. Convenient carry handle.
|
Group 24 12V Starting Battery, 875 CCA, 1000 MCA, 120 Res. Min., 45lb. from WEST MARINE
They feature a no-spill design that allows you to heel over to angles up to 45°. The exclusive molded-in stainless steel studs and locking hex nut terminals make connections easy, while protecting against corrosion and failure. Manufactured by East Penn, one of the most reputable battery companies in the US, these batteries receive over 250 quality control checks to guarantee superior starting performance every time. Wing nut terminals make connections easy. Convenient carry handle.
|
Group 24 12V Starting Battery, 460 CCA, 550 MCA, 65 Res. Min., 34lb. from WEST MARINE
They feature a no-spill design that allows you to heel over to angles up to 45°. The exclusive molded-in stainless steel studs and locking hex nut terminals make connections easy, while protecting against corrosion and failure. Manufactured by East Penn, one of the most reputable battery companies in the US, these batteries receive over 250 quality control checks to guarantee superior starting performance every time. Wing nut terminals make connections easy. Convenient carry handle.
|
12V DC 2,000lb Trailer Winch from MASTER LOCK
capacity 12V winch with a unique mounting plate that allows you to temporarily or permanently mount it on any flat surface or ball mount. Features a powerful rack and pinion gear design and is a good choice for boats up to 18'. Built-in carry handle. Includes 20' battery cable, toggle remote, back-up hand crank and hook with safety latch. Line speed: 6 fpm. Volts: 12V DC. Lift Capacity: 2,000lb. Boat Length: Up to 18'. Cable/Strap: 30'L steel. Construction: High-impact plastic housing .
|
15A Portable Battery Charger, 8.5"L x 5"W x 8"H, 3.5lb. from WEST MARINE
Most of the portable chargers weve tested have been poorly regulated, not automatic, and potentially damaging to quality batteries. Lightweight aluminum and plastic cases allow cable storage in the back. 6A charger has automatic temperature compensation and is set for flooded batteries. 15A and 30A models feature manual temperature compensation and an LED readout that clearly shows the charge parameters youve chosen, and monitors charge voltage and current while charging.
|
30A Portable Battery Charger, 6"L x 12"W x 10.75"H, 10.75lb. from WEST MARINE
Most of the portable chargers weve tested have been poorly regulated, not automatic, and potentially damaging to quality batteries. Lightweight aluminum and plastic cases allow cable storage in the back. 6A charger has automatic temperature compensation and is set for flooded batteries. 15A and 30A models feature manual temperature compensation and an LED readout that clearly shows the charge parameters youve chosen, and monitors charge voltage and current while charging.
|
6A Portable Battery Charger, 6"L x 5"W x 6.5"H, 2.1lb. from WEST MARINE
Most of the portable chargers weve tested have been poorly regulated, not automatic, and potentially damaging to quality batteries. Lightweight aluminum and plastic cases allow cable storage in the back. 6A charger has automatic temperature compensation and is set for flooded batteries. 15A and 30A models feature manual temperature compensation and an LED readout that clearly shows the charge parameters youve chosen, and monitors charge voltage and current while charging.
|
m-Series (Mini) Selector Battery Switch with Removable Knob from BLUE SEA SYSTEMS
300 amp continuous rating for outboards and small inboard engines Mini battery switches for outboard and small inboard systems are just 2-7/8" square but rated 300A continuous/500A intermittent/1500A cranking at up to 48V. Long 0. Case design allows surface, front panel or rear panel mounting. Tactile textures on face let you know the knob position by feel. 6005 model has a removable key which remains positively retained. Snap-out isolator covers and label set are included. Field Disc.
|
m-Series (Mini) Single Circuit ON/OFF Battery Switch with Removable Knob from BLUE SEA SYSTEMS
300 amp continuous rating for outboards and small inboard engines Mini battery switches for outboard and small inboard systems are just 2-7/8" square but rated 300A continuous/500A intermittent/1500A cranking at up to 48V. Long 0. Case design allows surface, front panel or rear panel mounting. Tactile textures on face let you know the knob position by feel. 6005 model has a removable key which remains positively retained. Snap-out isolator covers and label set are included. Field Disc.
|
|
4AWG Economy Battery Cables, seafit 4awg economy battery cables
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348982
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5349014
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348990
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5349022
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5349030
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5349006
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348974
|
|
|
Non-tinned wire. Handles 160A (136A in engine spaces). Lugs not waterproof. Not recommended for use in saltwater environments. . Each ShWt 0.
Part No: 5348966
|
|