Top Sellers
Potable Water Holding Tank, 3 Gal. from TODD ENTERPRISES
1520) requirements. Standard Tanks feature a multiple port arrangement that enables use as a sanitation holding tank or for potable water storage. They include two 1 1/2" fill/drain ports and two 1/2" vent/supply ports. Designed for waste storage, each includes two 1 1/2" ports for inlet and drain and one 1/2" vent port. Both Standard and Heavy-Duty Tanks feature threaded NPT ports that are molded in to eliminate stress cracks and leaks. One year warranty.
|
Gas Fill & Tank Vent - Black from PERKO
Perko Gas Fill and Tank Vent This ingenious plastic deck fill has a vent with a flame arrestor built right into the fill flange. A flip-up cap eliminates the need for a deck key and no ground wire is required.
|
Topside Fuel Tank, 3 Gallon, 18.13"L x 8.87"W x 9.87"H from MOELLER
Ideal for storage in transom wells and other small areas, these tanks hold their rated capacity and include reserve areas as well. Polyethylene construction with UV inhibitors meet all ABYC and USCG standards.
|
TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .
|
2-Tank System, 30/35” Gauge from HART SYSTEMS, INC.
Convenient, easy to use, simple to install and far superior to a dip stick, sight glass or an electric float gauge, Tank Tender uses air pressure to provide accurate readings for up to ten tanks. No electrical connection is necessary. With this system, you just select a tank to measure, pump in a small amount of air from the bridge and in two or three seconds you have a reading. We offer systems here for 30" deep tanks. Panels measure 4"W x 8"H x 2-7/8"D.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
Fitting Relocation Kit for Todd Poly Tanks from TODD ENTERPRISES
This kit enables you to seal existing ports in your Todd water tank and install new ones wherever you need them for your installation.
|
|
|
OEM Replacement Fuel Tanks from MOELLER
The OEM’s (Original Equipment Manufacturer’s) choice in lightweight, non-corroding portable fuel tanks! Includes a universal 1/4" NPT fuel pickup adapter and fulfills all your large and small outboard engine needs. Approved for use in Japan, Australia and New Zealand, Canada, ISO and CSA Certified, UL Listed. 21. 25"L x 14"W x 9.
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
|
|
|
Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.
|
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .
|
|
|
Above Deck Tank Hold Down Kit from MOELLER
Includes two flexible 72" straps, two mounting blocks, two eye hooks and four stainless screws.
|
|
Accumulator Tanks
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Sensor Max VSD Water Pumps
Versatile pumps feature variable speed control, solid state pressure sensor and nearly silent operation with no cycling. Controls pressure by changing motor speed and speeds up as demand increases. Self priming to 10' and able to run dry without damage. No accumulator tank needed. Operates on 12V or 24V DC. Switch Type: Pressure sensor controlled with no pressure switch . Self-Prime: 10' . Material: Glass-filled polypropylene . Port Sizes: 1/2" hose or 1/2" Qest thread .
Part No: 31750-0000
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme™ Series Smart Sensor Water Pumps
Designed specifically for cruisers, midsize and larger yachts, these pumps incorporate a special sensor that precisely monitors your system’s water pressure and adjusts the motor’s speed, eliminating the need for a pressure switch and accumulator tank. The four/five chamber design and large inlet and outlet passages maximize water flow, and provide “just like home” showers and pump operation offshore or at the dock. ” Run dry without damage. Material: Glass-reinforced nylon body and baseplate .
Part No: 4901-0211
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Polished stainless steel housing with butyl rubber diaphragm provides maximum corrosion resistance. Easy to install and maintain, this 2gal. capacity tank maintains consistent water pressure and temperature. Reduces pump cycling. Pre-charged to 20psi. Includes mounting feet for easy installation and a mounting bracket to accommodate any type of Shurflo water pump. Material: Stainless steel with butyl rubber diaphragm . . Pressure: 100psi . Port Sizes: 1/2" NPT female .
Part No: 3400-002
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Accumulator Tanks
Made of non-corrosive plastic, these tanks have an internal pressurized bladder which reduces pulsation and rapid on/off pump cycling. Bladders are pre-pressurized and their pressure can be adjusted with a standard bicycle pump. Tanks mount in any position. Include convenient Snap-Fit fittings. Material: Plastic with rubber bladder . Port Sizes: Includes four Snap-Fit port fittings: Two for 1/2" hose; Two for 1/2" Qest thread. Maximum Pressure: 125psi .
Part No: 30573-0000
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme™ Series Smart Sensor Water Pumps
Designed specifically for cruisers, midsize and larger yachts, these pumps incorporate a special sensor that precisely monitors your system’s water pressure and adjusts the motor’s speed, eliminating the need for a pressure switch and accumulator tank. The four/five chamber design and large inlet and outlet passages maximize water flow, and provide “just like home” showers and pump operation offshore or at the dock. ” Run dry without damage. Material: Glass-reinforced nylon body and baseplate .
Part No: 4901-1211
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Paragon Jr. Pressure Water Pump
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.
Part No: IPS-38
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks->Accumulator Tanks
Made of non-corrosive plastic, these tanks have an internal pressurized bladder which reduces pulsation and rapid on/off pump cycling. Bladders are pre-pressurized and their pressure can be adjusted with a standard bicycle pump. Tanks mount in any position. Include convenient Snap-Fit fittings. Material: Plastic with rubber bladder . Port Sizes: Includes four Snap-Fit port fittings: Two for 1/2" hose; Two for 1/2" Qest thread. Maximum Pressure: 125psi .
Part No: 30573-0003
|
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Freshwater Pumps->Extreme™ Series Smart Sensor Water Pumps
Designed specifically for cruisers, midsize and larger yachts, these pumps incorporate a special sensor that precisely monitors your system’s water pressure and adjusts the motor’s speed, eliminating the need for a pressure switch and accumulator tank. The four/five chamber design and large inlet and outlet passages maximize water flow, and provide “just like home” showers and pump operation offshore or at the dock. ” Run dry without damage. Material: Glass-reinforced nylon body and baseplate .
Part No: 5901-0211
|
|
|
|
Home -> Plumbing -> Freshwater Systems -> Water Tanks
Ideal for tight spaces where larger tanks won't fit, this tank is designed to maintain waterline pressure and reduce unwanted pump cycling—which helps to keep the pump cool and extend its life. Incorporates a butyl rubber diaphragm in a nylon housing to maintain pressure for years. Material: Nylon . Capacity: 24fl. oz. . Pressure: 125psi . Port Sizes: 1/2" NPS male . Dimensions: 4. 8"H x 3. 8"W x 9.
Part No: 182-200
|
|
|
|
Home -> Plumbing -> Freshwater Systems
p>Provides smooth quiet water flow without pulsation Converts Conventional Water System Pumps to Variable Speed Drive. Variable Speed Drive (VSD) converts everyday pumps into sensor-controlled pumps that automatically adjust in real time to changes in pressure. As more or less flow is required the pump adjusts the voltage to your existing pump motor providing smooth and pulsation-free water flow. Adjusts for multiple fixtures . Works with most multi-chamber diaphragm water pressure pumps .
Part No: 31777-0000
|
|
|
