Welcome! Please Sign-In
Top Sellers
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .
Adjustable Lock from TAYLOR
Adjustable Lock from TAYLOR
Three-part system provides easy snap-on/snap-off fender attachment and adjustment. A stainless base mounts to your boat, into which a peg snaps to hold the fender strap (sold separately). Fixed peg requires tying a knot to secure the fender at the desired height. Adjustable peg - adjust fender height by simply pulling on the strap. Max.
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
Aquatech Boots, Black, 7 from GILL
Aquatech Boots, Black, 7 from GILL
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
Flat Cam Riser, 1"H from HARKEN
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
Arrow Style Windvane from RONSTAN
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
Transom Adapter for Bracket from FULTON
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
Type I Commercial Life Vest, Child, Under 90lb. from KENT
Type I Commercial Life Vest, Child, Under 90lb. from KENT
Designed to extend survival time in rough waters, these vests represent an excellent value in commercial safety gear. Capable of turning an unconscious person to a vertical or slightly backward position in the water. Sturdy, durable foam flotation won’t waterlog. Adjustable strap for a snug fit. USCG-approved and is required on commercial craft. USCG Type: I. Intended Use: Commercial. Features: Reflective patches. Buoyancy: Adult: 23lb. Flotation Material: Polyethylene foam.
Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
It's a fisherman's utility belt for your kayakUnique, pre-slotted attachment bar allows you to mount a variety of accessories including rod holders, fishfinders, compasses, GPS units or lights securely to your kayak without having to mount them permanently. Features nylon straps for attaching to most standard deck loops, making it easy set up or remove. It adjusts to fit almost any kayak and can be cut down to match the width of narrower singles. Rubber feet protect and stick to decks.
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.
Explorer ReliefBand® from ABBOTT LABS
Explorer ReliefBand® from ABBOTT LABS
Drug-free, electronic motion sickness relief! The only electronic drug-free, FDA cleared remedy for motion sickness, this medical device utilizes gentle user-controlled electrical stimulation to send messages to your brain that block the signals that cause nausea. Usage is easy—just strap it on the underside of your wrist and adjust to the setting that is most comfortable. No drowsiness or drug like side effects! Features include simple ON/OFF push-button control and five stimulation levels.

Adjustable Wrenches

10" Adjustable Wrench from PRO-GRADE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Adjustable Wrenches
Manufactured to ANSI standards, wrenches are drop-forged chrome-vanadium steel with a wide I-beam handle design. Each includes SAE and metric markings. Jaw capacities are 3/4" (6" model) and 1 1/4" (10" model).
Part No: 15010
6" Adjustable Wrench from PRO-GRADE Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Adjustable Wrenches
Manufactured to ANSI standards, wrenches are drop-forged chrome-vanadium steel with a wide I-beam handle design. Each includes SAE and metric markings. Jaw capacities are 3/4" (6" model) and 1 1/4" (10" model).
Part No: 15006
Stainless Steel Pliers & Wrench Set from WEST MARINE Home -> Paint & Maintenance -> Tools -> Tool Kits
Made of corrosion-resistant stainless steel, tools are drop forged, heat treated and have precision-milled jaws. Set includes 6" long nose pliers, 8" adjustable wrench and 10" groove joint pliers. Comfortable cushion grips.
Part No: 10190833
Bent Wrench from MARINETECH PRODUCTS Home -> Engine Systems -> Trim Tabs & Hydrofoils
The only jack plate you can adjust from inside the boat with only one screwThe only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: wrench-001
Adjustable Packing Nut Wrench from SEAFIT Home -> Paint & Maintenance -> Tools
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
Part No: 51008
Adjustable Ball Mount from MASTER LOCK Home -> Trailer & Parts -> Hitches, Winches & Jacks -> Hitches, Balls, Receivers
It allows you to accurately level your tow vehicle and trailer for safer towing, better trailer tracking and much less sway causing your vehicle to handle better. The ball mount can be easily adjusted with a 7/8" wrench or 3/8" square ratchet drive—even while the trailer is loaded on the ball. Ball mount height is automatically retained by a patented spring clip feature or simply record the ball mount height from its height reference marks. Capacity: 5,000lb. tongue weight.
Part No: 2841AT
10" Jack Plate from MARINETECH PRODUCTS Home -> Engine Systems -> Trim Tabs & Hydrofoils->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 1000M
8" Jack Plate from MARINETECH PRODUCTS Home -> Engine Systems -> Trim Tabs & Hydrofoils->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 800M
6" Jack Plate from MARINETECH PRODUCTS Home -> Engine Systems -> Trim Tabs & Hydrofoils->Manual On-the-Water Adjustment Jack Plate
The only jack plate you can adjust from inside the boat with only one screw The only jack plate that can be adjusted from inside the boat with only one screw. Patented design has no side hardware to loosen. Just turn the adjustment screw to the desired height, tighten the locking nut, and you are ready to go. Rated for 585hp. Vertical lift of 3. Interlocking design provides strength. Anodized aluminum body, aluminum angle, bronze oil-lite bushings, precision stainless steel support rods.
Part No: 600M
Fittingkit 6901 from PRO-PULSE Home -> Engine Systems -> Propellers & Drive Trains->Fittingkit 4901
Each ProPulse propeller comes with these essentials, yet they are often misplaced. The kits include the washer . Manual . Allen wrench necessary to make pitch adjustments to your prop or replace a damaged blade .
Part No: 6711-0
Fittingkit 6902 from PRO-PULSE Home -> Engine Systems -> Propellers & Drive Trains->Fittingkit 4901
Each ProPulse propeller comes with these essentials, yet they are often misplaced. The kits include the washer . Manual . Allen wrench necessary to make pitch adjustments to your prop or replace a damaged blade .
Part No: 6712-0
Nylon Rail Mount without Lever from WEST MARINE Home -> Electronics -> Antennas, Mounts, Cable -> Antenna Mounts->Nylon Rail Mounts
Low-profile steel cinch band clamps these mounts to 7/8" and 1" round rails. Ratchet-tooth design keeps the antenna pointed at the angle of your choice. The no-lever model adjusts with a 5/16" Allen wrench.
Part No: 81006A
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11