Top Sellers
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
|
Guzzler 500 Surface Mount Bilge Pump from GUZZLER/BOSWORTH
Guzzler 400 and 500 Bilge Pumps Capable of a 12' suction lift and a 12' delivery head. Surface-mount pumps include a fixed, horizontal handle. Thru-deck models include removable, vertical handle and thru-deck mounting plate with cover.
|
Service Kit for 30124-0000 Bilge Pump, 8 GPM from JABSCO
Kit includes Connecting rod. Diaphragm. Ppulsation dampener. Valve plate. Valve set (inlet and outlet) .
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Flo-Torq II Hub Kit, Mercury 225 EFI fourstroke outboards; Yamaha 225hp 4-stroke outboards, Prop Series B from MERCURY MARINE
Change props faster, cheaper, with Quicksilver's modular hubFlo TorQ II modular propellers let you easily switch props, change pitch, change from aluminum to stainless, or replace a bent propeller. They're a direct replacement for the Michigan XHS hub kits. When large underwater obstruction are encountered, the Delrin sleeve of the Flo-Torq II System is designed to "break away" following impact, ensuring that damage to the engine, engine drive and propeller is kept to a minimum.
|
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
|
XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.
|
Spares Kit for Whale Gulper 220 Pump from WHALE PUMPS
Parts service and repair kits for Whale Water Systems Units.
|
CARB GASKET KIT from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Impeller Kit 09959K from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
10077K REPL IMPELLER KIT from WICOR/SHERWOOD
Each kit includes Engine Specified Impeller, - all necessary O-rings and Gaskets for up to 50 different model Sherwood Pumps, Technical Guide, with Trilingual Identification in a new robust clam shell case.
|
Yamaha Carb Kit from SIERRA
Sierra carb kits and gaskets for engine tune ups.
|
Mas Gelcoat Repair Kit, White from MAS EPOXY
Permanently repair nicks, gouges and scratches in fiberglass hulls and decks with these easy repair kits. Gelcote can be used immediately over repairs made with polyester and vinylester. To use over epoxy repairs, the epoxy must be allowed to fully cure - check the epoxy cure schedule for further details. White Gelcoat kit includes: 1 2oz. jar of white Gelcote paste. 1 1/4fl. bottle of hardener . Multicolor Gelcoat kit includes: 7 colors - white, red, yellow, tan, blue, green, black 1 2oz.
|
Sight Glass for ARG-500 Strainer from GROCO
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
|
|
AFI-500 Waterproof Wiper Kits
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->AFI-500 Waterproof Wiper Kits
The 12V motor in this frame-mounted, self-parking, adjustable sweep and park wiper kit is encased in a UV-stabilized, temperature- and impact-resistant, waterproof housing. Includes 11" curved blade and adjustable arm. Arm length: 6-3/4" to 10-1/2". Style: Interior/Exterior . Sweep Direction: Both. Case Material: UV-stabilized, high-impact, high-temperature thermoplastic . Draw: 2 amps @ 12 V. Maximum Arm Length: 14" x 14" arm/blade combination.
Part No: 30005
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->AFI-500 Waterproof Wiper Kits
The 12V motor in this frame-mounted, self-parking, adjustable sweep and park wiper kit is encased in a UV-stabilized, temperature- and impact-resistant, waterproof housing. Includes 11" curved blade and adjustable arm. Arm length: 6-3/4" to 10-1/2". Style: Interior/Exterior . Sweep Direction: Both. Case Material: UV-stabilized, high-impact, high-temperature thermoplastic . Draw: 2 amps @ 12 V. Maximum Arm Length: 14" x 14" arm/blade combination.
Part No: 30004
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes -> Wipers->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33901
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33015
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33005
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 34010
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 37110
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33004
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 31014B
|
|
|
|
Home -> Engine Systems -> Horns/Wipers/Glove Boxes->Windshield Wiper Blades, Arms, Motors, and Kits
#32002 and 32003 have 110º adjustable sweep motor. #32000 and 32002 have 2-1/2" shaft length motor and are Windshield Frame Mount. 12 volt, 2 amps. AFI STD Wiper Motor with 11 inch stainless steel standard straight blade (33001) and adjustable (7-1/2 inches to 12 inches) stainless steel arm (33002) . Note: motor is not waterproof and is recommended for interior installations only. AFI Wiper Motors AFI-1000 is waterproof and powers 18" x 18" arm/blade combinations.
Part No: 33082
|
|
|