Swage Tool For Small Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.

Swage Tool For Large Diam Wire from SEAFIT
Swage your own oval sleeves with this cadmium-plated steel tool. Pressure is transmitted to the copper sleeve by tightening two bolts on the tool with a socket wrench.

Professional Swaging Tool from LOOS And CO., INC./C
A powerful five-hole swaging tool featuring adjustable jaws made of the finest grade hardened steel. The adjustment allows you to compensate for tool wear over time. Compresses oval and stop sleeves for wire sizes: 1/16", 3/32", 1/8", 5/32", and 3/16", plus 7/32" stop sleeves. Best Use: Swages 1/16", 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves, plus 7/32" stop sleeves.

Lifeline Fitting Hand Swage Tool from LOOS And CO., INC./C
Use to hand-swage lifeline fittings. Mfr. only guarantees safe installation with this tool and method.

MKIV Unit 0 Furler, 3/8" Pin from HARKEN
Installation is easy: C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into the foil without the need to cut your headstay. The foil's twin grooves and smooth feeder allow fast hoists, douses, and sail changes—ideal for club racing. The Harken toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye and the turnbuckle body is accessible for adjustment by raising the drum.

MKIV Unit 1 Furler from HARKEN
Installation is easy: C-shaped open connectors with low-friction plastic isolators slip onto the headstay wire and into the foil without the need to cut your headstay. The foil's twin grooves and smooth feeder allow fast hoists, douses, and sail changes—ideal for club racing. The Harken toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye and the turnbuckle body is accessible for adjustment by raising the drum.

Cruising Furler Unit 1, 1/2" Pin from HARKEN
A single-groove round foil withstands extreme reefing loads, letting you easily unfurl your headsail, furl and reef safely in a blow. The foils are easy to assemble with interlocking connectors (screws and adhesive included) built strong for years of torque-loading. The drum installs over your existing turnbuckle, adapting to a variety of rigging options. The Harken® toggle assembly accepts standard turnbuckles using swage, rod, Norseman or Sta-Lok terminals, or fits directly to a marine eye.

20 Piece Flatware - White from GALLEYWARE
Made from 18/10 stainless steel, these feature an anchor design on the durable plastic handle. Five-piece place settings include knife, salad fork, dinner fork, teaspoon and tablespoon.

Rescue Laser Light from GREATLAND LASER LLC
Signal for help, warn oncoming boats of your presence or locate your gear at night Signal other boats and aircraft in search and rescue emergencies, locate an overboard crewmember in the dark or find mooring balls and fishing gear. Features a long-life red laser diode that lasts up to 10,000 hours. Runs 40 hours on an easily replaceable 3-volt lithium CR123 battery. Easy to carry on a keychain or in a pocket. Non-flammable, environmentally safe. Rugged, machined aluminum with knurled design.

GLD30 Graph-Lite Lever Drag Reel - 600/30lb., 3.8:1 from PENN FISHING TACKLE
From their lightweight, high-strength, corrosion-resistant matte graphite frame and side plates with satin-finished brushed metal components, machined stainless steel gears, four aircraft-grade shielded stainless ball bearings and stainless reel stand to their machined black anodized aluminum spool—the same performance as in Penn's Formula Series can be found in these Graph-Lite reels. Drag: HT100™ has been Penn’s drag material of choice.

Prop Puller for Shafts 1" to 1-1/2", 3/4" Min Clearance from NATIONAL PRODUCTS
Removes two-, three-, most four- and and some five-bladed propellers with shafts from 1"–3"dia. Forked-end slips behind the prop hub even when clearance is tight. A recess on the shaft end prevents slippage. High-strength steel.

Telescoping Handle - 3'-6', Aluminum from WEST MARINE
Versatile handle works with a variety of pads and accessoriesHighly polished aluminum handles are constructed of 1"dia. heavy-duty aircraft grade, triple anodized aluminum, to provide many years of maintenance-free use. These buoyant handles also feature two non-slip hand grips for superior control and stainless-steel, pushbutton, quick connect/disconnect allows for instant attachment of a variety of brushes and other cleaning aids. Push-button design for quick accessory change outs.

Small Boat Length 21"–28", Boom Min. 7'0", Boom Max. 13'0" from HARKEN
These kits contain everything for installing a simple, variable system Keep your mainsail under control and on the boom as it’s lowered. Works exceptionally well with fully-battened mains, but can also be used with conventional sails. Everything you need to install a simple, adjustable system is included in the kit: pre-swaged wires, blocks, eyestraps, line, a cleat, fasteners and instructions (including how to alter your sail cover for use with lazy jacks). 13m–3. 75m). 6' to 16' (3.

Series 40 Organizer, with 3 Sheaves from RONSTAN
These deck organizers are an effective means of deflecting halyards and control lines to winches and stopper cleats. Cheeks are manufactured from aircraft-grade aluminum and hard-coat anodized for durability. All-purpose sheaves handle extreme high loads and all configurations can be stacked. Sheave diameter: 1 5/8" (40mm). Max. line size: 1/2" (12mm). Max.

Calcutta C75AP Aluminum Plier, 7 1/2"L from CALCUTTA OFFSHORE BA
Lightweight aluminum pliers won't rust or corrode, snip shark line and downrigger line fast Super lightweight, tough cutting pliers are constructed of T6061 aircraft aluminum with a corrosion-resistant finish for years of use. 420 carbide jaws are strong enough to slice through mono and single strand wire. It will cut through shark fishing line and downrigger wire. Jaws are replaceable.