6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .

Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Aluminum Anode Kit Bravo II & III from CANADA METALS
Offered in aluminum, for use in salt or brackish water, or magnesium, for freshwater only.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

Cleat, European Jam from WEST MARINE
Strong nylon jam cleat commonly found on most European boats.

Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.

60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .

Telescopic Tiller Extension 29" - 48" from RONSTAN
Ronstan tiller extensions feature fluted anodized aluminum tubing for durability and rigidity and a tapered, non-slip Hyperlon grip with ball end. The Urethane universal joint can be removed without tools. Adjustable-length versions feature a fast-action adjustable shaft for additional versatility. 4732913 Aluminum Fixed 24” RF3128 5/8"Tubing Dia. , 1"Grip Dia. , 24"L, 5. 3Lbs. 1133131 Lightweight Aluminum 33” RF3129 5/8"Tubing Dia. , 1"Grip Dia.

Urethane Universal Joint from RONSTAN
Accessories for Aluminum Battlestick Tiller Extensions.

Brushed Aluminum 4-Rod Rack from TACO PRODUCTS
Stylish, brushed aluminum rod storage racks feature slotted rod holders to lock in reels for safe, secure transport. Each holder is 12" long, with a 1. 9" dia.

Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.

3/8" NPT Aluminum hose barb from MOELLER
3/8 NPT X 3/8" Aluminum hose barb with male threads.

12-1/4" x 15" Propeller for Evinrude/Johnson Outboards from MERCURY MARINE
Three-blade aluminum one-piece propellers for Evinrude/Johnson outboards. 8–15hp, 9. 9–15hp 2–stroke 1974 & up, 8/9. 9/15hp 4–stroke 1995 & up: Model 5026695. 20–35hp, 20hp 1984–97, 25/30hp 1984 & up, 35hp 1976 & up: Models 4744207, 8640492. 40–75hp, 40hp 1984 & up, 65hp 1980–85, 48hp 1987–96, 75hp 1975–85, 50hp 1975 & up, Sprint 1986–92, 55hp 1976–79, Formula E 1986–92, 60hp 1980–85: Models 8640484, 4744173, 4744181. 45–75hp large gearcase, OMC Cobra 2. 3–2.