Welcome! Please Sign-In
Top Sellers
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
30lb. River Anchor from GREENFIELD PRODUCTS
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Large Anchor & Rode Bag from WEST MARINE
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Bow Roller, Fits Sand (Danforth Style), Anchors up to 20 lb., Special Narrow Width (US Only) from LEWMAR
Anchor rollers make dropping and weighing anchor easier on you and your boat. They help reduce chafe, prevent scratches and dings to your boat’s finish and provide a secure place to store your anchor when used in conjunction with an optional chain stopper or tensioner. We stock rollers to fit the most common combinations of anchor, mounting style and boat. Installation note: overhanging anchor rollers should be supported along at least 2/3 of their length. Easily installed using common tools.
Fluke-Style Anchor Rail Mount from SCHAEFER
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
Medium Folding Grapnel Anchor from SEAFIT
Medium Folding Grapnel Anchor from SEAFIT
Like mushroom anchors, this four-fluke anchor is a safe choice for inflatables - there are no open flukes to puncture fabric. It's easy to store and won't get tangled in other lines on your boat.

Anchor Hardware SLIDE ANCHOR

Danik Anchor Hook from SLIDE ANCHOR Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Part No: DH
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE Home -> Anchor & Docking -> Chain & Mooring -> Anchor Hardware->Stainless Swivel Anchor Connectors
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Part No: 644.10
Dock Post Bumper - White 7" x 17" from TAYLOR Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Post Bumpers
These bumpers are designed to protect your boat from damage caused by pipe supported type docks by preventing the boat from contact with the metal dock pipe and hardware at dock level. Easily slides over 1-1/2" and 2" dock pipe and rests securely against the dock. . Molded from marine-grade vinyl with an inflation valve to adjust firmness.
Part No: 45600
Dock Post Bumper - Blue 7" x 17" from TAYLOR Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Post Bumpers
These bumpers are designed to protect your boat from damage caused by pipe supported type docks by preventing the boat from contact with the metal dock pipe and hardware at dock level. Easily slides over 1-1/2" and 2" dock pipe and rests securely against the dock. . Molded from marine-grade vinyl with an inflation valve to adjust firmness.
Part No: 45604
4 Step Aluminum Dock Ladder from DOCK EDGE INC Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Aluminum Dock Ladders
All assembly hardware is stainless steel and assembly is quick and easy An optional quick release kit is includedSimply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its’ pre-drilled holes Rail height: 24-1/2" above the dock Distance to first step from the dock surface: 12" 10-1/2" between steps Steps are: 4-3/4" deep and 16" wide.
Part No: 2004-F
5 Step Aluminum Dock Ladder from DOCK EDGE INC Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Aluminum Dock Ladders
All assembly hardware is stainless steel and assembly is quick and easy An optional quick release kit is includedSimply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its’ pre-drilled holes Rail height: 24-1/2" above the dock Distance to first step from the dock surface: 12" 10-1/2" between steps Steps are: 4-3/4" deep and 16" wide.
Part No: 2005-F
5'–7' Bungee Dock Line from KWIK TEK, INC. Home -> Cordage -> Anchor Line & Dock Line -> Dock Line->Bungee Dock Lines
Shock-absorbing docklines with built-in snubber Airhead Bungee Dock Lines absorb shocks to boats, cleats, docks, pylons and other hardware. The bungee cord is hidden inside the line and acts as a built-in snubber. Two foam floats protect the boat from chafing, and there's a sliding adjustment at both ends for quick docking. Recommended for docking boats and PWCs up to 3,500lb. Tensile strength is 2150lb.
Part No: AHDL5
3 Step Aluminum Dock Ladder from DOCK EDGE INC Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Aluminum Dock Ladders
All assembly hardware is stainless steel and assembly is quick and easy An optional quick release kit is includedSimply tilt the ladder up and slide it out for storage and cleaning, or mount the ladder permanently with its’ pre-drilled holes Rail height: 24-1/2" above the dock Distance to first step from the dock surface: 12" 10-1/2" between steps Steps are: 4-3/4" deep and 16" wide.
Part No: 2003-F
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11