Top Sellers
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
|
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Type I Commercial Life Vest, Child, Under 90lb. from KENT
Designed to extend survival time in rough waters, these vests represent an excellent value in commercial safety gear. Capable of turning an unconscious person to a vertical or slightly backward position in the water. Sturdy, durable foam flotation won’t waterlog. Adjustable strap for a snug fit. USCG-approved and is required on commercial craft. USCG Type: I. Intended Use: Commercial. Features: Reflective patches. Buoyancy: Adult: 23lb. Flotation Material: Polyethylene foam.
|
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
|
5"L T20 Snap Shackle, 31/32" Opening, 31/32" Bail, 10,000lb. MWL from TYLASKA
S. -made shackles offer race-ready high performance, one-handed operation and they can be snapped open under load. Large bail size ideal for additional sheets, spinnakers and other multi-line applications. They have a breaking strength of 5,000 lbs and weigh just 2. 2 ounces in the standard bail configuration. Ideal for J-24s, Mumm 30s and similar boats. Tylaska T8 Snap Shackles are perfect for applications requiring high strength and low weight. 5 ounces in the standard bail configuration.
|
Large Fixed Bail Snap Shackle from WICHARD
All our snap shackles are hot drop forged from high resistance stainless steel. Only forging creates a superior steel product, by increasing its elasticity and maximizing the steel's internal strength. A forged snap shackle will deform long before breaking; it will not burst or break suddenly.
|
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
|
Anchor Hardware Snap
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1016
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Fender Accessories->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1015
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1017
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Tidy-Ups™ Fender Adjusters
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
Part No: 1018
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks
aluminum tubing with 15"W plastic steps Ladder folds in half, cushioned standoffs fold flat for storage Four step 46"L Mounting hardware included .
Part No: 12150:01
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
Snap it over a lifeline or rail and adjust fender height in a jiffy. Holds fender whips securely without hard-to-untie knots. Vinyl strap with stainless hardware. For lines up to 5/8''dia.
|
|
|