Top Sellers
Lightweight Dock Cart from KART-AHOY
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
|
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
|
Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .
|
Super Kart Ahoy from KART-AHOY
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
|
Folding Dock Cart from BEST WHEELS PRODUCTS
Lightweight, folding cart folds flat to 2. 5/16" for compact storage and converts to working position with the push of a button. Tough with a hauling capacity of 175lb. and 7" non-marking, shock-absorbing tires. Aluminum telescoping frame Weighs 8.
|
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
P750 Ice Eater, 115V, 25' Cord from POWER HOUSE
The P750 de-ices diameter of approximately 60 feet Prevent damaging ice formation around your boat’s hull with a 3/4 hp energy efficient Ice Eater. Motor is matched with a permanent-split capacitor to ensure quick, high-torque and smooth operation from the single-phase induction motor. Copper, stator motor windings are double-insulated, to guard against water. Internal, hard-faced mechanical seal is itself immersed in dielectric lubricating fluid and protects the motor against water intrusion.
|
Scare Eye Balloon from BIRD B GONE
Inflatable Vinyl Scare Eye Balloon with Mylar Tape Tail Visual Scare Device. Confuses Birds with Lifelike Reflective Predator Eyes and Markings. Ideal for use on Fruit Trees, Patio Covers, Pool Areas, Gazebos, Boats, Etc.
|
Terror Eyes Bird Repeller from BIRD-X
Designed using scientific research, the hanging ball constantly moves and features menacing eyes on the front and the back which follow birds and scare them away.
|
8' dia. Bird Spider from BIRD B GONE
Stainless steel “arms” of the Bird Spider move with the breeze, deterring birds from landing and causing damage to your boat, rooftop, lights, signs and more. It’s easy to install and maintain and will not harm people or birds.
|
Large Rail Clamp (5/8" to 1-5/8") from TRIMAC SALES
Keep your decks clean with this proven bird deterrent! This large, 6' diameter, wind-driven rotator keeps gulls from roosting on hardtops, awnings, biminis, flying bridges, sail booms and decks—and eliminates the mess they create. Powered by the slightest breeze, its motion deters even the most determined bird. Installation is easy and so is removal whenever you want to use your boat. Folds in half for compact storage and includes Standard Two-Screw Mounting Block.
|
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
|
Dock Line Holding Tool from SHURHOLD PRODUCTS
Use it to easily loop your dock lines around posts or pilings. Especially useful at low tide when the piling is too high to reach. Mounts to any boat pole.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
|
Anchoring and Docking Dock Bumpers
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Post Bumpers
These bumpers are designed to protect your boat from damage caused by pipe supported type docks by preventing the boat from contact with the metal dock pipe and hardware at dock level. Easily slides over 1-1/2" and 2" dock pipe and rests securely against the dock. . Molded from marine-grade vinyl with an inflation valve to adjust firmness.
Part No: 45600
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Post Bumpers
These bumpers are designed to protect your boat from damage caused by pipe supported type docks by preventing the boat from contact with the metal dock pipe and hardware at dock level. Easily slides over 1-1/2" and 2" dock pipe and rests securely against the dock. . Molded from marine-grade vinyl with an inflation valve to adjust firmness.
Part No: 45604
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB4.90
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Hull Hugr Dock Bumpers
Tough dock bumpers made from UV-resistant, tear-proof vinyl/polyester tri-laminate. Filled with high-density, closed cell polyethylene foam for durability. Available in a Flat or Corner styles. Include four corrosion-proof fasteners for mounting.
Part No: HHB-C1W
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->EPDM Rubber Dock Guards
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
Part No: 96039
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Guards
Thick, pliable, EPDM abrasion-resistant rubber strips mount on docks and pilings to absorb shock and protect hulls from damage. Won’t discolor or mar boat finish. Mount with stainless steel nails. 6'L. Material: Premium rubber . Attachment Method: Stainless steel dock nails (sold separately) . Cross Section Shape: D-shape . Shock Absorption Mechanism: EPDM Rubber .
Part No: 96017
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1078
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1072
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB4.30
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Dock Pro™ Inflatable Dock Wheels
Smooth rolling wheels fend your vessel away from the dock. Molded-in standard-needle inflation valves let you adjust firmness. Hot dip galvanized hardware. Strong, 2"dia. axle housing on the 12" and 18" model, and 3/4" dia. axle housing on the 9" model. Material: Vinyl. Attachment Method: Galvanized hardware. Shock Absoption Mechanism: Inflated vinyl bumper.
Part No: 1073
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->EPDM Rubber Dock Guards
Protect your boat and dock with this new line of EPDM rubber dock edging. EPDM rubber is designed to withstand the most extreme environments and is soft enough to cushion your boat from the dock or pier. It’s softer than vinyl and stays flexible when exposed to UV, offering uncompromising longevity. Choose from five different profiles for protection where you need it most. Attachment Method: Stainless steel dock nails (sold separately). Shock Absorption Mechanism: EPDM Rubber.
Part No: 96038
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Bumpers->Super Edge Dock Bumpers
Unique C-shape design provides protection on the top as well as the side of the dock–protecting any type of boat where the gunnel hangs over the dock. Polyester with closed-cell foam inner cushion. Will not deteriorate in the sun and cleans easily with liquid soap. Mounts using stainless steel screws.
Part No: SEDB3.60
|
|
|