Welcome! Please Sign-In
Top Sellers
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Large Anchor & Rode Bag from WEST MARINE
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Black from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Removable Chafe Gear Wrap, 4', for 3/4"– 7/8" Line from MEGAFEND
Protect your docklines from chafe and extend their life with attractive ballistic nylon sleeves featuring easy Velcro™ installation/removal. Ends include 1/8"dia. nylon cords that attach to line to prevent slip. Finished edges create an aesthetically pleasing, uniform look.
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Danik Anchor Hook from SLIDE ANCHOR
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
30lb. River Anchor from GREENFIELD PRODUCTS
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
Lightweight Dock Cart from KART-AHOY
Lightweight Dock Cart from KART-AHOY
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).

Anchoring and Docking Solenoid

Windlass Control Box/Solenoid from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 0052531
Motor Reversing Solenoid from COLE HERSEE Home -> Anchor & Docking -> Windlasses & Rollers
Two solenoids in one saves money and simplifies wiring. Rated at 75A make and break at 12V. DPDT intermittent duty.
Part No: 24450
Dual Direction 12v Solenoid from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers
Allows you to set up two operation stations for your windlass. A footswitch at the bow and a hand held remote at the helm or two foot switches, it's all up to you.
Part No: 0052507
12V Continuous Duty Solenoid from WEST MARINE Home -> Anchor & Docking -> Windlasses & Rollers
For safe, dependable control of a windlass or other high-amperage DC equipment. Continuous duty. Rated at 750A make, 100A break, 80A continuous. Insulated ground.
Part No: SPA-10600W
Dual-Direction Solenoid from MAXWELL Home -> Anchor & Docking -> Windlasses & Rollers
Used in conjunction with up/down remote panel, held-held remote control, and/or footswitches to switch the motor in the required direction. For use with windlasses with 12V DC series-wound motors only. 200A continous capacity.
Part No: P19045
For three-wire split field motors from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000318
For three-wire series wound motors from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers -> Windlass Accessories->Windlass Control Solenoids
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Part No: 68000320
5-Button Wireless Remote, Windlass and Thruster from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers->Wireless Remotes for Windlasses
Works with all Lewmar windlasses that use a control box/solenoid. Using over one billion individual codes, the proprietary encryption scheme prevents false triggering from any other device or similar fob. Three-button version works with a single windlass. Five-button version can operate a second windlass or bow thruster. Fobs float and are waterproof to IP67 (1 meter deep).
Part No: 68000845
Remote Spare Fob (5-Button) from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers->Wireless Remotes for Windlasses
Works with all Lewmar windlasses that use a control box/solenoid. Using over one billion individual codes, the proprietary encryption scheme prevents false triggering from any other device or similar fob. Three-button version works with a single windlass. Five-button version can operate a second windlass or bow thruster. Fobs float and are waterproof to IP67 (1 meter deep).
Part No: 68000847
V1 Gypsy, 5/16" Chain Diameter from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers -> Windlasses->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6671011108-138
HRC-6 12V Windlass, ¼” Chain, ½” Rope, 600lb. Max Pull, Up Speed 89’/min, Down Speed 98’/min, 400W from MAXWELL Home -> Anchor & Docking -> Windlasses & Rollers->HRC Series Windlasses
These new windlasses feature the same patented power up, power down rope/chain management technology developed for the Freedom series. Simple "bolt down" installation ensures straight forward and rapid on-deck installation and setup. Built in rode pipe, dual direction solenoid, up/down control panel, on/off breaker, freefall lever included. Rode Type: Chain/Rope. Case Material: Die cast powder coated aluminum case. Capstan/Gypsy Material: Chromed Bronze. Warranty: Three year Mech.
Part No: HRC612V
V3 Gypsy, 3/8"HT Chain Diameter from LEWMAR Home -> Anchor & Docking -> Windlasses & Rollers->V-Series Stainless Steel Windlasses
Compact, stainless steel windlasses for power and sail boats feature an elegant, low profile design that conceals a robust, reliable drivetrain. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button. The V1/2/3 windlasses now feature FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation. All models include breaker, up/down switch, dual direction solenoid and clutch handle. Listed below in 12V. Style: Vertical .
Part No: 6672211110-139
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12