Top Sellers
Electric Bilge Pump Installation Kit from ANCOR MARINE
Essential items for installing a bilge pump Convenient package includes four #8 x 3/4" stainless-steel panhead screws, one 1-3/4" x 3/4" stainless steel hose clamp, and three 16-14AWG heat shrink butt connectors.
|
Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .
|
|
|
Dielectric Silicone Compound from ANCOR MARINE
A silicone "grease" that's great for waterproofing coax connections, butt splices, and other sliding electrical connections. 1/3-oz.
|
G4 BI-PIN Base, 24V, 10W, 0.42A, 11CP from ANCOR MARINE
Keep spare bulbs handy in case of burnouts or breakage.
|
30 Amp Circuit Breaker with Black Toggle from ANCOR MARINE
Temperature, false-trip-free, AC/DC breakers For use with either AC or DC current. Magnetic circuit breakers are temperature-stable. A false-trip free mechanism prevents breaker from being held with contacts closed during overload. Switch Type: Toggle . Voltage Compatibility: AC, DC . Safety Features: Temperature stable, false-trip free. Housing Material: Plastic Housing . Dimensions: 2" x 1. 64" x . 75" . Terminal Type: Screw .
|
30 Amp Double-Pole Circuit Breaker from ANCOR MARINE
Used with 110V AC main circuits so that both the hot and neutral conductors are disconnected. Same features as single pole breakers. White toggles. Switch Type: Toggle . Voltage Compatibility: 110V AC . Safety Features: Temperature stable, false-trip free . Housing Material: Plastic . Housing Dimensions: 1. 48"W x 2. 00"L x 1. 84"D .
|
Shrinkwrap Tape, 4" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Shrink Tape, 2" x 180', Blue from DR. SHRINK
Heat Shrinkwrap Tape Heat Shrink Tapes are designed for repairing holes in the shrinkwrap, for taping pleats and also for attaching zipper access doors. Heat shrink tape is not designed to be stuck to the hull or other parts of the boats as it will leave an adhesive residue.
|
Black Streak DfE Cleaner, Qt. from THETFORD
We want to stress that Thetford Marine Care Green Products are competitively priced, truly green and perform as well of better than conventional products! The product line is the first Marine Care line that is truly GREEN. UltraFoam clings to surfaces and resists dripping or running off the deck or the hull allowing more complete cleaning in addition to conservation of the product and the environment. Safe for most surfaces including gel coated surfaces. Carries DfE approval Available in 32oz.
|
Marine Silicone Sealant, Clear, 10oz. Tube from WEST MARINE
Use wherever a flexible, removable seal is required A specially-formulated marine silicone that won’t sag, shrink or turn yellow. Can be used above and below the waterline wherever a flexible, removable seal is required. Excellent for bedding deck fittings and hardware that you may want to remove at some time. Also good for insulating between dissimilar metals to prevent galvanic corrosion. Formulation: One-part silicone sealant . Bonds to non-oily woods, metal, fiberglass, glass, plastics .
|
2" ID, 90° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
|
5" ID, 45° Marine Rubber Exhaust Elbow from SHIELDS RUBBER
Exhaust hose elbows let your wet-exhaust line make tight turns without kinking. They provide excellent tolerance to engine heat, vibration and back pressure. Install over rigid tubing or pipe using the four included stainless T-bolt clamps (two at each end). Not intended for hose-to-hose connections. Lubricate with water or detergent. 250°F max.
|
Lube Tube Adapter for Yamaha, Nissan, Tohatsu, Honda (2-50hp) from WEST MARINE
Marine lower unit drain, flush and fill tool. Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefishier lower units. Quick, easy and clean way to change marine lower unit gear lube. For use with all 8- and 10-oz.
|
Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .
|
|
Ancor Marine Adhesive-Lined Heat Shrink Tubing (Alt)
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 307124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 301103
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 303124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 304124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306148
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305106
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 302124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 305124
|
|
|
|
|
Home -> Electrical -> Switches, Fuses & Accessories->Adhesive-Lined Heat Shrink Tubing (ALT)
Ancor’s adhesive lined tubing is superior to conventional heat shrink tubing. It’s made from cross-linked polyolefin, which is much stronger than PVC. With a 3:1 shrink ratio, it can shrink up to one-third of original size. The waterproof adhesive is heat-activated. It bonds tenaciously to insulating covers and terminals, producing strain relief that makes a stronger connection than the mechanical connection alone.
Part No: 306602
|
|
|
