Welcome! Please Sign-In
Top Sellers
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
Fishing Chair Rod Gimbal, Tubular Mount from SEAFIT
Fishing Chair Rod Gimbal, Tubular Mount from SEAFIT
Triple chrome-plated brass for high strength and superior corrosion resistance. Tubular mount fits 1" chair tubing. Flat plate model mounts under wood and plastic base chairs.
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .
Framed Tackle Backpack from CALCUTTA OFFSHORE BA
Framed Tackle Backpack from CALCUTTA OFFSHORE BA
Carry tackle on your back and leave your hands free Designed with a durable internal frame, breathable foam back support and padded shoulder straps to make carrying heavier loads of fishing gear easier. Features: Fold-out lure storage pockets. Waterproof pouch system. Padded horizontal security pocket . 10" sink compartment.
Premium Fishing Rod Rack from WEST MARINE
Premium Fishing Rod Rack from WEST MARINE
Display your rods conveniently in a handsome solid wood rack! Proudly showcase and store your rods and reels in this attractive rolling rod rack. Fine furniture quality rack features locking casters that keep it from rolling around onboard and its glossy finish makes it a great addition to any room. Spooled design fits multiple rod sizes, even nets! Holds up to 24 rods, nets or gaffs. Easy assembly with all parts and tools included. 27" x 32" x 13".
Chromed Zamak Cowl Vent from ATTWOOD
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Aft-Deck Shower System from ATTWOOD
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
P-Trap Fuel Surge Protector from ATTWOOD
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
Stern Three-Mile LED Light from ATTWOOD
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
Exploring the South Coast of British Columbia from FINE EDGE
Exploring the South Coast of British Columbia from FINE EDGE
Its complete descriptions of routes and anchorages are based on the authors' personal experience of each location and on information from local skippers not available anywhere else. With 200 diagrams, over 200 photographs of promising features, 2000 GPS waypoints, and extensive quotes from Canadian Sailing Directions, nautical adventurers can get underway to hundreds of pristine coves and inlets from the balmy Gulf Islands to the unspoiled fishing grounds off the north end of Vancouver Island.
Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
Kayaker's Fishing Toolbar from CONFLUENCE HOLDINGS
It's a fisherman's utility belt for your kayakUnique, pre-slotted attachment bar allows you to mount a variety of accessories including rod holders, fishfinders, compasses, GPS units or lights securely to your kayak without having to mount them permanently. Features nylon straps for attaching to most standard deck loops, making it easy set up or remove. It adjusts to fit almost any kayak and can be cut down to match the width of narrower singles. Rubber feet protect and stick to decks.
Rescue Laser Light from GREATLAND LASER LLC
Rescue Laser Light from GREATLAND LASER LLC
Signal for help, warn oncoming boats of your presence or locate your gear at night Signal other boats and aircraft in search and rescue emergencies, locate an overboard crewmember in the dark or find mooring balls and fishing gear. Features a long-life red laser diode that lasts up to 10,000 hours. Runs 40 hours on an easily replaceable 3-volt lithium CR123 battery. Easy to carry on a keychain or in a pocket. Non-flammable, environmentally safe. Rugged, machined aluminum with knurled design.

ATTWOOD Fishing

2-In-1 Adjustable Rod Holder from ATTWOOD Home -> Fishing -> Fishing Accessories
A dual-position locking ring on the open top tube of this versatile rod holder allows you to use it with both spinning and conventional tackle. The ring opens with a snap so the rod is finger tip ready when a fish strikes. It's fully adjustable both vertically and horizontally. Locks securely in the desired position with a large lock nut. Made from non-corroding black polycarbonate.
Part No: RH-40
30° Flush Mount Rod Holder from ATTWOOD Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66362-7
0° Flush Mount Rod Holder, Stainless Steel from ATTWOOD Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66364-7
15° Flush Mount Rod Holder from ATTWOOD Home -> Fishing -> Fishing Accessories -> Rod Holders->Stainless Steel Flush Mount Rod Holders, 0-30°
Polished 2" diameter 316 grade stainless steel for corrosion resistance UV resistant polymer liner UV resistant cover cap/gasket closes tube when not in use 2" Diameter Includes Gap-Gasket.
Part No: 66363-7
Pro Series Adjustable Rod Holder from ATTWOOD Home -> Fishing -> Fishing Accessories->Pro-Series Adjustable Rod Holder and Mounting Bases
Pro-Series rod holders with 360 degree lift-and-turn horizontal adjustment for spinning casting rods. Rail mounts attach to round or square rails up to 1" dia. Includes: rod holder, the side mount base, and a gear lock.
Part No: 5002-4
Bracket Adaptor from ATTWOOD Home -> Fishing -> Fishing Accessories->Pro-Series Adjustable Rod Holder and Mounting Bases
Pro-Series rod holders with 360 degree lift-and-turn horizontal adjustment for spinning casting rods. Rail mounts attach to round or square rails up to 1" dia. Includes: rod holder, the side mount base, and a gear lock.
Part No: RM-32-7
3/4IN 14 SS MESH STRAINER from ATTWOOD Home -> Fishing -> Fishing Accessories
Durable strainers to prevent debris from clogging baitwell drains and aerator pumps. Formed stainless steel wire mesh molded into black PVC plastic base. Applications: Fits Aerator Inlet and 3886-1 Thru-Hull.
Part No: 4232-7
The Centric Seat from ATTWOOD Home -> Seating & Covers -> Seating -> Helm & Fishing Seats
Heavy-duty, molded frame with contoured surfaces looks great and eliminates pressure points. S-curve backrest fits the spine for comfort; side bolster supports in seat and back lend support in rough seas and on tight corners. Rotates on a 23" diameter from seat post. Removable, snap-on white vinyl upholstered seat and back pads . 17. 9"W x 21. 5"H x 19.
Part No: 98350-2
Pro Series Rod Holder Side Mount, White from ATTWOOD Home -> Fishing -> Fishing Accessories
Convenient, interchangeable mounting bases are a hallmark of the Pro-Series, "2-In-1", and Mini Rigger systems. This base provides 360° lift-and-turn horizontal adjustment and fail-safe retention. The locking keyway prevents removal of a rod holder or Mini Rigger until it is turned directly inboard.
Part No: 5021-7
Avenir Bolster Seat, Bright-White/Beige from ATTWOOD Home -> Seating & Covers -> Seating -> Helm & Fishing Seats->Fully Upholstere Avenir Seat
Comfort Boaters have been Demanding Avenir is the world's first bolster seat with the award winning, patented SAS shock absorbing system. Attractively patterned Avenir™ SAS™ spring suspension seats are trimmed out with a backrest, upholstered onsert (for deep-tuck styling), and molded polyurethane foam with stapled-in-place upholstery. All upholstery is marine-grade vinyl. Seats include corrosion-resistant T-nuts for attachment to seat pedestals. Prevents rider from "bottoming out.
Part No: 98408BE-2
(F) Post - Wedge Style 13"H x 2"D from ATTWOOD Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-28913
Locking Seat Mount from ATTWOOD Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: 818441-3
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11