Top Sellers
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
|
|
P-Trap Fuel Surge Protector from ATTWOOD
One combined product eliminates the need to install both a fuel line vent and a surge protector. Inertia of surging fuel drives the surge ball against upper seat, closing the large vent opening and limiting passage to smaller openings, which reduces fuel flow and minimizes spillage. Operates in any orientation within 45° of vertical. Baffles resist water intrusion during normal sea conditions and washdown. Constructed of glass filled polypropylene to withstand oil, gas, alcohol blended fuels.
|
Back-to-Back Lounge Chair Seat Cover, 22"H x 50"W x 22"D from TAYLOR
Breathable rip/stop polyester fabric plus air vents provide optimum protection and ventilation for your seats, especially in hot and humid climates. Polyurethane coating on the inside prevents color transfer or bleed-through . Comes with drawstring hem . Available for most popular seat styles .
|
Folding Teak Pedestal Table from SEATEAK
Teak tabletop measures 16"W x 25"L closed and 32"W x 25"L open and has a fold-down support leg. A built-in drink holder that accommodates four glasses, or binoculars and two glasses. Clips mount the unit firmly to all pedestal guards, whether expanded or collapsed, so there's no drilling. (Note: the steering post must not protrude beyond the front of pedestal guard or the table will not be able to clip properly to the guard. Includes installation hardware.
|
Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.
|
Chromed Zamak Cowl Vent from ATTWOOD
Black plastic base, attached hose flange. 3" duct. Type: Cowl . Material: Chrome-plated zamak, plastic . Dimensions: 2-1/4"H x 5-5/16"W x 6"L . Cutout Size: 3" .
|
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
|
Aft-Deck Shower System from ATTWOOD
This compact hot/cold shower stores neatly in its own compartment on the stern or in the head. Includes a handheld shower spray head with shutoff, 6' hose, hot/cold water controls and a cover. Easily hooked into your freshwater system. Compartment is drilled for six #8 fasteners. Material: High-impact plastic . Dimensions: 9-1/2"H x 5"W x 2-1/4"D . Hose Size: 6'L . Port Sizes: 1/2" NPT .
|
800gph Tsunami Bilge Pump, 2.5A @ 12V DC Draw, 3/4" Port, 4-3/8"H x 3-1/2"W from ATTWOOD
Versatile Tsunami pumps feature interchangeable, twist-and-lock cartridges that reduce maintenance time. All wires are caulked and tinned to prevent water wicking. Rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents and the compact, low-profile design eases installation in tight spaces.
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Tsunami T800 Cartridge Head, 12V, 36" Wire from ATTWOOD
Interchageable, twist-and-lock cartridges reduce maintenance time and even enable an angler to switch cartridges between an aerator and bilge pump. The rugged glass and mineral-filled polymer construction resists chemicals, fuel and detergents.
|
Single Deck Chair Cover, 24"H x 24"W x 22"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Pontoon Captain's Stand, 33"H x 26"W x 19"D from TAYLOR
Protect your seats from the elements!Heavy-duty waterproof poly/vinyl blend keeps your seats from cracking and fading. Poly/vinyl blend is softer and more pliable than traditional vinyl.
|
Port Runner Folding Bike from WEST MARINE
Reliable portside transport that's super easy to stow! Our exclusive 20" bike is ideal for reliable portside transport. The distance between the dock and the grocery store is not always shortor flatand that's why this bike has a chrome-plated steel derailleur and six big sprockets for climbing inclined streets. Stows small for space economy and features a convenient luggage rack to make errands easier. 28lbs. Gears: Six . Drive Train Components: Shimano RD-TX30 .
|
|
Attwood Seat Pedestal Components
|
|
Pedestal -Seat Adj 14-20 2-3/8|Pedestal -Seat Adj 14-20 2-3/8.
Part No: 2385400
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-28913
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: 818441-3
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-37914
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-39004
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-39204
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-69773
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-37904
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-18914
|
|
|
|
Home -> Seating & Covers -> Seating->Snap-Lock Power Pedestal Systems
Engineered to prevent unintentional detachment, components lock together yet release easily with the push of a button. Combines corrosion-resistant anodized aluminum, fixed or adjustable power pedestals with base plates and E-coated seat mounts that are dipped in black paint and electro-coated. Sturdy 1. 77"dia. system is virtually wobble-free. A - 13" Seat post. B - Adjustable drop in post, 16" - 20". C - Adjustable drop in post, 24" - 30".
Part No: SP-67904
|
|
|
|
Home -> Seating & Covers -> Seating->Wedge Pedestal Systems
Designed to "wedge" together to prevent unintentional detachment, these components snap easily into the base for a snug, stable fit. Simply press the tab to release. Seat mount may be snapped directly into base for a lower profile while fishing, trailering, or covering your boat. Seat mounts swivel 360º. 2" systems are for use under 5 mph.
Part No: SP-68914
|
|
|
|
Home -> Seating & Covers -> Seating
Heavy-duty 2-7/8" posts and 9" diameter machined bases are engineered for strength and safety in harsh off-shore conditions. Ergonomic positive-locking handles with stainless steel components PowerLock™ Multi-Action handle controls both swiveling and height adjustment. No more wondering which handle does what TwinGlide™ Bushing ensures smooth operation and maximum stability at t any height position EZ-Lock™ CAM-Action makes seat removal simple.
Part No: 88101
|
|
|