Welcome! Please Sign-In
Top Sellers
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Replacement Gas Strut, 12" Compressed x 20" Extended Length, 40lb. Rating from TAYLOR
Reliable gas struts incorporate a strong annealed steel rod with a special coating for added corrosion resistance. Recommended by the manufacturer for use as dock box lid supports or hatch supports. Where use as a hatch cover support is desired, we recommend you base your selection upon the recommendation of the hatch manufacturer.
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Portable Bait Tank, 20 Gallons, 18.5"W x 18"H from KEEP ALIVE
Completely portable bait tanks feature a patented Oxygen Infusor aeration system that creates millions of micro bubbles to efficiently oxygenate water. Dark blue interiors reduce shadows on the tank wall, keeping fish calm and stress-free. Generous 13" lids close securely with twist-locks. Insulated models help maintain more consistent water temperature. 480gph infusor pump. Built-in water and air flow control valve. Non-slip carry handles . Easily connects to your battery .
Exit Box Style, 7/8" Sheave Dia., 1/8" Max. Line, 350lb. SWL, 1.1oz. from RONSTAN
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.
Teak Reverse Rocket Launcher, Bait Tray and Drawer from POMPANETTE
Teak Reverse Rocket Launcher, Bait Tray and Drawer from POMPANETTE
Troll with ease! Troll multiple lines hassle-free, by using Pompanette's rocket launcher. Rugged and sleek, the rocket launcher comes with 4 Pompanette rod holders, bait tray and drawer. Features: Padded Back. 4 rod holders. Bait tray.
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
Windlass Control Box/Solenoid from LEWMAR
Windlass Control Box/Solenoid from LEWMAR
Two-direction solenoid/control boxes designed for use with three-wire split field motors, or two-wire permanent magnet motors and three-wire series-wound motors.
Dock Box or Cooler Chocks from AFI
Dock Box or Cooler Chocks from AFI
Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
Bait Tank Plumbing Kit from KODIAC
Bait Tank Plumbing Kit from KODIAC
Includes exclusive non-clog drain screen and instructions on how to build three different types of tanks.
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
7' Ugly Stik Combo, Saltwater Spinning; 4.6:1 Gear Ratio; Medium Action from SHAKESPEARE
Shakespeare's versatile Ugly Stik combos give the anger plenty of casting power to deliver bait to crafty and boat-wary fish. The two piece rods feature Fuji reel seats and EVA grips to maximize sensitivity and response to light strikes and the Shakespeare spinning reel sports stainless bearings, graphite frame, and aluminum spools for fast, smooth retrieval and reliable casts. Style: Saltwater Spinning . Target Species: Big Water/Light Tackle Targets . Rod Type: Conventional Ugly Stik .
Adjustable Packing Nut Wrench from SEAFIT
Adjustable Packing Nut Wrench from SEAFIT
Better than a pipe wrench If you are not equipped with wrenches that fit the nuts on your stuffing box, we suggest you purchase TWO of these. Why? Because you will need two to make an adjustment: One for the locking nut and one for the adjusting nut. These wrenches tend to be easier to use than pipe wrenches—especially in tight engine spaces where many boaters must work. Primary Usage: Adjust/remove inboard shaft packing nut . Size: 1" to 3" adjustable .
Climate Gear Tool Bag from CUSTOM LEATHER CRAFT
Climate Gear Tool Bag from CUSTOM LEATHER CRAFT
Soft tool bag resists weather, won't skid More practical than a rigid tool box, this bag easily stores in the odd-shaped nooks and crannies of boats. The tough tarpaulin construction is enhanced by a polyester bottom with rubber strips to keep it from siding across your deck! Features: Large internal compartment with 12 tool loops . External compartment with weather-resistant zipper. Includes: Carpet-bag-style handles . Dimensions: 14"L x 12 1/2"W x 11"H.
CP Zinc Cupboard Catch from PERKO
CP Zinc Cupboard Catch from PERKO
Chrome-plated zinc. . Supplied with box strike. . Measures: 1 1/2"W x 1 7/8"L . Requires #6 fasteners (not included). Made in USA.

Bait Box WILLAPA

Bait Box, Crabbing from WILLAPA Home -> Fishing -> Tackle Boxes & Lures
Bait Box 1x1 16GA black vinyl coated wire. Made with bottom holding hock to easily attach to any trap. Dimensions: 7"L x 5"W x 4"H. Made in U. S.
Part No: 00119
Crabbing Bait Box, Large from WILLAPA Home -> Fishing -> Tackle Boxes & Lures -> Bait Wells, Critter Boxes
Large Bait Box 1x1 16GA black vinyl coated wire. Made with bottom holding hock to easily attach to any trap. Dimensions: 8"L x 6"W x 5"H. Made in U. S.
Part No: 00176
Puget Sound Shrimp Pot from WILLAPA Home -> Fishing -> Tackle Boxes & Lures
Puget Sound Shrimp Pot 1/2"x1" 16GA black vinyl coated wire. Four tunnels, 2-way bridle rope and built-in bait tunnel included. Dimensions: 24"L x 24"W x 9"H. Made in U. S.
Part No: 00109
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11