Anchor Chain Tensioner from JOHNSON, C.S.
Holds chain up to 5/16" firmly to keep your anchor quiet on its roller. A quick-release pin holds the welded handle securely in a tensioned position. 316 stainless steel.

Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.

1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.

3-IN-1 Boat Hook from SHURHOLD PRODUCTS
Convert your Shurhold pole to a paddle or boathookUse thse accessories with Shurhold's "one-pole-does-it-all system. Boat Hook has line-carrying feature, centered push-off and basic boat hook. Paddle features Shur-Lok quick-release adapter and is a great safety item for any boat.

Surface-Mount Titan Bilge Pump from WHALE PUMPS
Powerful, lightweight bilge pump. Constructed entirely from non-corroding materials. The Titan has a quick release clamp for speedy maintenance. The removable handle can be oriented in any direction. Surface mount and thru-deck mount models available. gpm: 28. Material: Plastic. Dimensions: 15-9/16"H x 9-1/4"W x 17-1/4"L. Port Sizes: 1-1/2".

Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.

Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.

Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

Flow-Max Ball Scupper from T-H MARINE
Positive sealing ball scupper with twist-off design makes clearing debris a snap. Simply twist to remove ball cavity. Includes stainless steel security pin, multiple mounting holes and a neutral buoyancy ball that won’t float up and break the seal. Meets all ABYC standards.

Kite Release Clips from AFTCO
Super-lightweight composite clips feature a numbered, graduated adjustment slider for precise release tension setting. Large diameter, gold titanium-nitride coated wire bail for less line wear and smooth releases. Kite clip can be ''stacked'' or added to kite line any time.