Top Sellers
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
ARS-5 Advanced Regulator from BALMAR
Simply select one of five preset program choices based on battery type, and the belt size setting that matches your alternator’s drive belt width and alternator output rating. Battery settings include standard and deep-cycle flooded, gel, AGM, and Optima programs. When used with MC-TS-A and MC-TS-B alternator and battery temperature sensors, the ARS-5 ensures even greater charging performance, as well as critical protection for your alternator and batteries. Controls a single alternator only.
|
Series 40 Ratchet Block, Single/Cleat, 385lb. SWL, 3.4oz. from RONSTAN
Practical Sailor's Ratchet Block Click-Off rated Ronstan's Orbit block "Overall, the most impressive with its grip, versatility, and lightweight design. " The newest addition to Ronstans Orbit range of super lightweight, fiber-reinforced blocks. Ideal for sheet applications on dinghies up to 16' and control line applications for small keel boats. There are two styles of Series 40 ratchet blocks. Many of the top Grand Prix Laser sailors are switching to Orbit blocks.
|
|
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Nauta 9 Gallon Flexible Fuel Tank from IMTRA CORPORATION
Flexible gasoline tanks won't rust, don't rattle, are easy to tie down, easy to carry, and won't scrape your boat. The Nauta 9-Gallon flexible fuel tank features comfortable, molded carrying handles and rugged 840-denier nylon construction. Fitted with a 1 1/2'' pivoting fill and a capped and 1/4'' NPT hose barb. Measures 28 1/2'' x 17 1/2'' x 6 1/2''.
|
Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
|
|
|
Impeller Kit -6, 8, 9.9,15HP 4 Stroke from MERCURY MARINE
Type A: Fits Merc/Mar 4hp (1-cyl), Model 75 (7. 5hp) and Model 110/9. 8hp when the water impeller ID measures 0. 456" Type B: Fits all Mercruiser Alpha One Generation II drives with serial number OD 469859 and above Type C: Fits Merc/Mar 6/8/9. 9hp 2-cycle outboards (USA OA197112 & above, BEL 9461526 & above), 15hp 2-cycle and 9.
|
Tachometer/System Check (4"), Johnson/Evinrude outboard, 7000RPM from FARIA INSTRUMENTS
For more than 50 years, Faria has lived up to its reputation as a producer of high-quality, long-lasting instruments. The immensely readable and durable instruments in the Euro series feature bold, bright white numerals against a non-glare black background. Sculpted white pointers and low-profile black aluminum bezels make for even greater readability. Features a perimeter-lit black dial and flat glass lens.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Sight Glass for ARG-500 Strainer from GROCO
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
|
Repair Kit for ARG-1000/1250 Strainers from GROCO
ARG-Series Strainer Parts & Repair Kits Baskets: Stainless steel or nylon. Sight glass.
|
40ST Chrome ELS Winch, 43'/min.:15'/min. Line Speed; 43A:135A Draw@12V DC from LEWMAR
Electric winches operate at the touch of a button and provide a full manual two-speed override when you want it. The ELS Series use a solid-state control box that runs the winch at high speed and slows it down as the load increases. Quiet running and easy to install, these winches provide efficient operation and are suitable for genoa sheets on boats 30'–36', and for main halyards on boats 40'–46'. Both series include the winch, drive unit, motor, deck switch, control box and circuit breaker.
|
|
Balmar 6, 9 & 94-Series Alternator Pulleys
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
9-Series alternator pulleys are machined with rear spacer flange for use with Balmar small case 9-Series and large case 94-Series high-output alternators. Can be used with 6-Series alternators (may require some adjustment for pulley alignment).
Part No: 1300
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
6-Series alternator pulleys machined with rear spacer flange and rear shoulder dimensioned for use with Balmar small case 6-Series high-output alternators.
Part No: 61-0020
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
BALMAR alternators come with a deep-groove 2. 5'' x 3/8-1/2'' pulley, except for the Balmar 150 and 200, which come with a dual-belt 2 11/16'' x 1/2''.
Part No: 4031
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
**PULLEY-1. 9 In. K-6 SERP 17mm|**PULLEY-1. 9 In.
Part No: 1318
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
**PULY-1. 9 In. K8 SRP(CMNS)|**PULY-1. 9 In.
Part No: 5537-B
|
|
|
|
Home -> Electrical -> Chargers & Inverters -> Alternators and Regulators->6, 9 & 94-Series Alternator Pulleys
**PULY-2. 7In. x. 5 In. DUALLEHMN|**PULY-2. 7In. x. 5 In.
Part No: 4038-CAM
|
|
|