Welcome! Please Sign-In
Top Sellers
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
Amazing Roll Off All Purpose Cleaner, Quart from BELL CHEMICAL CORP.
Amazing Roll Off All Purpose Cleaner, Quart from BELL CHEMICAL CORP.
Amazing Roll Off, All Purpose Cleaner Amazing Roll Off cleans dirt that other cleaners can't touch and rolls off with little or no rubbing. Inhibits rust and leaves a wax-like finish that resists dirt . A non-acid product that is biodegradable and environmentally safe.
Inflatable Boat Antifouling Paint from PETTIT
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
Engine Winterizing Kit from WEST MARINE
Engine Winterizing Kit from WEST MARINE
Winterize your outboard or sterndrive with this convenient kitUses your existing flusher and a garden hose to winterize your outboard or sterndrive engine, even while it’s on the trailer. Kit includes a five-gallon jug, hose fittings and instructions for winterizing. You supply five gallons of nontoxic antifreeze for each engine. Complete instructions are included.
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
A - Atlantis Clock - Tide & Time from WEEMS AND PLATH
A - Atlantis Clock - Tide & Time from WEEMS AND PLATH
Hand-polished, fogged brass cases with precision quartz movement. The highly reliable, temperature compensated, aneroid barometer reads in inches and millibars. Barometer movements are calibrated for altitudes to 3500' above sea level. The combination quartz clock and tide clock movement averages the lunar tide cycle. S. Solid cast brass case with protective lacquer coating Screw-type bezel allows easy access Clock features a German movement with bell silencer Dial: 4" Base: 5 1/2".
Arrow Style Windvane from RONSTAN
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
Transom Adapter for Bracket from FULTON
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
Trailer Wheel Bearing Grease from WEST MARINE
Trailer Wheel Bearing Grease from WEST MARINE
Protects bearings against salt air, saltwater and atmospheric chemical corrosion. For wheel bearings (including disc brake wheel bearings), swivel hinges, pins, winches and anchor chain reels. Lubricates and protects bearings. Great for wheel bearings, swivel hinges, pins, and winches. Avaialble in two 3oz. cartridges, 14oz. cartridge, 1lb. can or 5. 2oz.
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Transom Drain Tube & Plug from MOELLER
Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Shaft Cap Nuts Only - 1/2", Pack of 8 from C E SMITH
Roller Size Length Shaft Diameter Shafts and Nuts 4" 5 1/4" 1/2" 4" 5 1/4" 5/8" 5" 6 1/4" 1/2" 5" 6 1/4" 5/8" 8" 9 1/4" 5/8" 10" 11 1/8" 5/8" 11" 12 3/4" 1/2" 12" 13 1/2" 5/8" Shaft Only 18" 19" 5/8" Cap Nuts Only Packs of 8.
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .

Bell Trailering

4" Bell Assembly, 5-1/4" Dia x 8"L from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Bell Assembly Bow Stops
Thermal-plasticized rubber bow stops with bell ends protect your boat's hull from hitting metal bow stop brackets.
Part No: 29301
Submersible Over 80"W Trailer Light Kit from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Premium Trailer Lights are a unique compact size fits where space is limited. Lens is sonically sealed to base to provide a "Bell-Jar" that makes this lamp fully submersible with easily replaceable bulbs. Come pre-wired with molded plugs for easy installation. Fit trailers 80"W and wider. .
Part No: 01-6531-71
3" Bell Assembly, 4-1/2" Dia x 6" L from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers -> Boat Support->Bell Assembly Bow Stops
Thermal-plasticized rubber bow stops with bell ends protect your boat's hull from hitting metal bow stop brackets.
Part No: 29300
Bell Roller End, 1 3/4"L x 3-1/2"D x 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29742
Bell Roller End, 1 1/4"L x 3"D x 1/2" Shaft from C E SMITH Home -> Trailer & Parts -> Trailer Parts & Carriers->Thermo-Plasticized Rubber Rollers, Guards & Caps
They are resilient, non-marking, stronger than black rubber and softer than polyurethane.
Part No: 29740
Right Light from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Premium Trailer Lights are a unique compact size fits where space is limited. Lens is sonically sealed to base to provide a "Bell-Jar" that makes this lamp fully submersible with easily replaceable bulbs. Come pre-wired with molded plugs for easy installation. Fit trailers 80"W and wider. .
Part No: 01-5381-71
Sidemarker Replacement Lens from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-9112-71
Right Light from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-5193-71
Left Light from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Premium Trailer Lights are a unique compact size fits where space is limited. Lens is sonically sealed to base to provide a "Bell-Jar" that makes this lamp fully submersible with easily replaceable bulbs. Come pre-wired with molded plugs for easy installation. Fit trailers 80"W and wider. .
Part No: 01-5382-71
Submersible Over 80"W Light Kit from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-6544-71
Left Light from WEST MARINE Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Over 80"W Trailer Lights
Waterproof lighting system is designed for over 80" wide trailers. Lights feature gasketed lenses that provide a "bell-jar" pocket inside the light to help keep water away from bulbs and contacts. High-impact acrylic lens and rugged duramold housing. The left light includes a license plate illuminator. Lighting kit includes two tail lights, trailer harness, licenses bracket, installation kit and instructions.
Part No: 01-5194-71
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12