Aquatech Boots, Black, 7 from GILL
2mm double-lined neoprene boots are idea for dinghy and small boat performance sailing and offer protection and secure footing in demanding conditions. They feature a wraparound, non- marking natural rubber sole for improved grip, flatlocked seams for comfort and an adjustable strap for maximum support. .

Authentic Original Boat Mocs, Sahara, 10 from SPERRY TOP-SIDER
Popular moc is a high-performance boat shoe and good-looking casual footwear! The Original Moc for women combines classic nautical style with foot-friendly features. Genuine Sperry Top-Sider® siped outsole, full grain cowhide uppers and genuine handsewn moccasin construction. Sole: Non-marking rubber with Wave Siping . Closure Type: 2-eye leather laceup. Shock absorbing EVA heel cup . Reinforcement: 360° lacing system with rust-proof eyelets . Dark Brown Velvet; Wide: Brown, Sahara.

Authentic Original Boat Mocs, Brown, 6 from SPERRY TOP-SIDER
Popular moc is a high-performance boat shoe and good-looking casual footwear! The Original Moc for women combines classic nautical style with foot-friendly features. Genuine Sperry Top-Sider® siped outsole, full grain cowhide uppers and genuine handsewn moccasin construction. Sole: Non-marking rubber with Wave Siping . Closure Type: 2-eye leather laceup. Shock absorbing EVA heel cup . Reinforcement: 360° lacing system with rust-proof eyelets . Dark Brown Velvet; Wide: Brown, Sahara.

Women's AO Moc, Sahara, 9 from SPERRY TOP-SIDER
Popular moc is a high-performance boat shoe and good-looking casual footwear! The Original Moc for women combines classic nautical style with foot-friendly features. Genuine Sperry Top-Sider® siped outsole, full grain cowhide uppers and genuine handsewn moccasin construction. Sole: Non-marking rubber with Wave Siping . Closure Type: 2-eye leather laceup. Shock absorbing EVA heel cup . Reinforcement: 360° lacing system with rust-proof eyelets . Dark Brown Velvet; Wide: Brown, Sahara.

T-Top Boat Cover, Center-Line Length 20'5" to 21'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

T-Top-Canopy Frame from C E SMITH
Strong, 100% stainless steel T-top system has all the looks and function of a custom in a do-it-yourself, bolt together assembly. Durable, long-lasting canopy is framed with a welded 1" tube, and measures 60"W x 84"L. Buy the Canopy Frame and then choose from either 1/2" tube Standard Uprights or Highbar Uprights. Front V-brace system accommodates a wide range of console heights and allows mounting on either side of your windshield.

T-Top Boat Cover, Center-Line Length 19'5" to 20'4", Blue from TAYLOR
The main features of these covers are: Bow and stern sections are separated into two halves. The sections are joined through the use of a 7mm single pull molded nylon zipper on both the port and starboard sides. Cover design incorporates a "console tube" section with two adjustable straps which lift and secure the cover halves up and over the console body and up under the T-top. The top edge of console tube incorporates an adjustable draw rope in both front and rear sections.

U-1001C Top Coat Spray Catalyst - Gallon from STERLING
Spray catalyst for gloss topcoats.

Mast Boot Fitting Mast to 23", Collar Size to 37" from SAILING SPECIALTIES, INC.
Easily installed over stepped masts by slitting one side, trimming to fit, and gluing with adhesive supplied. Secure with stainless hose clamps. May not fit rectangular wooden masts. Flexible, UV-resistant plastic.

Top Mount, Right Hand, Trim, Tilt, Chrome from TELEFLEX
Form meets function with these mechanical engine controls. Designed with a contoured grip for ergonomic hand-fitting comfort, these controls also provide a universal fit to any current 3300-/OEM type control cable and adapt to any current engine harness for inboards, outboards and I/Os. Both the Ch1700 side-mount and the CH7500 top-mount with right hand lever feature push-button warm-up and single lever shift and throttle operation with trim in the handle.

Straight Adapter, 30A Male/15A Female (straight blade, not locking, connections) from MARINCO
Marinco straight adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet or equipment of dissimilar power configuration. They are integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications.

Wincher, 2.25IN TO 2.75IN from WATSKI
Winchers are rubber disks that fit over the top of your non-self-tailing winches to make them perform like self-tailers. Loading up the winch drums until the line contacts the underside of the Wincher creates friction which allows the line to self-tail. A rope groove holds line reasonably securely around the top of the winch. Practical Sailor Magazine suggests Winchers for halyard winches, but not sheet winches, although we have many comments from customers who swear by them.

Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.

Boat Vent II from TAYLOR
The newest in boat cover venting and support Don't let your interior suffer from mold and mildew damage. The patented Boat Vent II installs quickly and easily, with no screws or fasteners. The venting area provides for greater volume of exhaust air while closing the top to bottom gap - keeping water out!. The Boat Vent II is manufactured from a superior grade polycarbonate blend material for strength and UV resistance and will accommodate either 3/4" or 7/8" support poles.

Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.