Removable Davit, 350lb. Lift Rating, 9:1 Purchase from ST. CROIX MARINE
Quality, design and ease of use make Removable Davits the choice of discriminating boaters. Just pull the locking pin on each davit and slide it out of its shoe. Engineered for the marine environment, the 1" (25mm) 316 tubular stainless steel is mirror polished for a lasting finish. Rated 225 and 350lbs. per pair and designed to carry a 10 or 11' inflatable with up to a 15hp outboard (providing that the total weight of the boat, motor, gas tank and equipment does not exceed the 350lb.

Removable Davit, 225lb. Lift Rating, 7:1 Purchase from ST. CROIX MARINE
Quality, design and ease of use make Removable Davits the choice of discriminating boaters. Just pull the locking pin on each davit and slide it out of its shoe. Engineered for the marine environment, the 1" (25mm) 316 tubular stainless steel is mirror polished for a lasting finish. Rated 225 and 350lbs. per pair and designed to carry a 10 or 11' inflatable with up to a 15hp outboard (providing that the total weight of the boat, motor, gas tank and equipment does not exceed the 350lb.

Easy-Lift 2-15HP from C-LEVEL
This unit makes easy work of lifting and weighing your boats motor. Polyester webbing is sun water, salt and oil resistant. Harness has a “built-in” handle that needn't be loosened to snap a shackle through to begin lifting the motor. Lifting strap is 1 1/2"W on smaller unit; 2"W on larger.

Easy-Lift 15-30HP from C-LEVEL
This unit makes easy work of lifting and weighing your boats motor. Polyester webbing is sun water, salt and oil resistant. Harness has a “built-in” handle that needn't be loosened to snap a shackle through to begin lifting the motor. Lifting strap is 1 1/2"W on smaller unit; 2"W on larger.

Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.

Walker Bay 8, 8'3" Length, 4'4" Beam, 71lb., 425lb. Capacity (up to 2 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.

FT325 Fishmaster Inflatable Boat from SEVYLOR
Get out on the lakeDesigned by fishermen, this boat is very practical due to its double hull construction which makes it very rugged and rigid. Accepts a 3 HP gas motor at the stern, removable inner hull, slatted roll up floor, gear pouch, inflatable removable rowing seats, swivel oarlocks, oar holders, mooring ring, fishing rod holder, water drain plugs, grab line and a nylon carry bag. LOA - 10’3” . Beam - 4’2” . Weight - 43 lbs. Max. HP - 3 HP . Pers. Cap. - 5 . Max.

BassTender 10.2 Fishing Boat from KL INDUSTRIES
Full of features including an aerated livewell, navigation lights, bow and stern wiring for trolling motor, rod holders, oarlock socket kit and an enclosed battery compartment. Includes two seats. Constructed of highly impact resistant polyethylene and broad beamed for stability. Application: Fishing Hull Material: Polyethylene Construction: Thermo-formed 2-piece hull and deck Hull Shape: Modified tri-hull Length: 10'2" Boat Beam: 4'7" Weight: 165lb. Capacity: 474lb.

Sportster Inflatable Boat from INTL LEISURE PROD
Portable, compact and easy to set up, this full-featured inflatable boat is a great way to enjoy inland on-the-water fun! Outstanding features include durable 500 denier, three-ply polyester reinforced material, three high pressure chambers and sturdy anodized aluminum, three slat floor. Durable hardware includes stainless-steel D-ring at bow and two D-rings at stern. The marine plywood transom can support a small outboard or trolling motor. HP: 5. Capacity: Up to three persons or 700 pounds.

Walker Bay 8 Performance Sail Kit from WALKER BAY BOATS
Designed to be rigged and on the water in just minutes, our sailing kits come complete with all lines, hardware and quality components required to harness the wind! Inspired by the leading edge in international sailboat design, our boats have an efficient hull that glides along in light breezes while our moderate sail plan provides control for heavier winds. Whether you are a novice or advanced sailor, you will love the ease of sailing with a Walker Bay Sail Kit. Reinforced mast support tube .

Walker Bay 10 High-Performance Sail Kit from WALKER BAY BOATS
All Walker Bay boats convert quickly and easily into a delightful sailing dinghy by using our straight forward sail kits. Designed to be rigged and on the water in just minutes, our sailing kits come complete with all lines, hardware and quality components required to harness the wind! Inspired by the leading edge in international sailboat design, our boats have an efficient hull that glides along in light breezes while our moderate sail plan provides control for heavier winds.

PVC Tube Kit For Walker Bay 8 from WALKER BAY BOATS
These tube kits transform your Walker Bay 8 or Walker Bay 10 boat into a Rigid Inflatable Dinghy (RID) and they increase load and horsepower ratings. A RID combines the best features of a versatile hard-shell dinghy with the utility and stability of an inflatable.

Inflatable Boat Top Coating, White from WEST MARINE
Restore Hypalon or PVC. Remains flexible. Inflatables can be deflated and rolled without cracking the coating. Quart covers 10’ boat.

Replacement Propeller for Torqeedo Electric Outboard from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.

Travel 801S Electric Outboard, 23" Shaft length from TORQEEDO
A rechargeable lithium-manganese high-performance battery connects to the head of the motor, eliminating the need for heavy batteries and cumbersome connections. It is easy to charge with the included 110V AC charger and lasts up to two hours depending on conditions and energy demand. Due to its unique folding mechanism, the Travel breaks down quickly to pack into the included waterproof carry bag for easy storage. A perfect choice for smaller boats including tenders, dinghies and daysailors.