Top Sellers
3/16" Stock Dia. U-Bolt, 1-3/8” Thread Length, 1-3/16" Hole Spacing, 1" Eye Dia. from SEAFIT
Stainless steel U-Bolts have metric threads. The top plate is held in place by small ears that are forged into the U-bolt. Includes matching backing plate. ShWt .
|
|
|
|
|
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
|
|
|
2'' Trnsm Ladder Extension Shim from GARELICK
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.
|
Adjustable Height Standard Friction Lock Pedestal Seat, Ribbed Series from GARELICK
Seat raises or lowers, locks at desired height . 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate . Anodized protective finish helps prevent saltwater corrosion and weathering. . 2-7/8" (7cm) diameter ribbed stanchion tube, 9.
|
Fold-Down Transom Ladder from GARELICK
Great for boats with small transoms. Includes a unique bracket for attaching to most angled or curved transoms in an area only 12"W x 6. 5"H. Both steps fold down for boarding.
|
Ladder Storage Mounting Bracket from GARELICK
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
|
Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
|
4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
|
Folding Dock/Raft ladder 3 step from GARELICK
Unique flip-up hinge mechanismUnique hinged ladder flips up and out of the water to prevent marine growth. Features a 10° angle for effortless boarding. Quick-release pins make it easy to remove for storage. 16"W steps have anodized aluminum tread and a curved step to make boarding more comfortable. Overall ladder width is 18". One-year warranty. Wide track 18"W ladder with full width 16" steps. Anodized aluminum heavy-walled 1"dia. tube construction.
|
3/8" Bow/Stern Eye - 1.03" ID Between Studs x 4.63" Thread Length from SUNCOR
Bow / Stern Eye 304 Stainless Steel - Formed . Each U-Bolt set includes four nuts (two standard and two beveled) . Includes one bow plate, and one stern plate. . Threads are "UNC". . Stock size: 3/8" . ID between studs: 1. 03" . Thread length: 2. 50" .
|
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
|
500 RC Windlass, 600lb. Max. Pull, Boat Length 35', 1/4"HT Chain, 1/2" Rope Rode Size, 62'–Chain; 45'–Rope Speed Up/Min., 60' Speed Down/Min., 60A–75A @12V Draw from MAXWELL
These low-profile windlasses feature a patented tension system that maintains resistance required to feed chain/rope rode into the locker instead of jamming it in the windlass. Designed for easy installation, the motor can be oriented in any of 12 positions below decks. Two pieces bolt together quickly. Gasketed, watertight base. For decks to 2 3/4" thick. Capstan models and extra-long shafts for thick decks are available by Special Order. Style: Vertical . Rode Type: Rope/chain .
|
|
Bolt GARELICK
|
|
Home -> Seating & Covers -> Seating->Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Six)
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
Part No: 21022:01
|
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware->Stainless Steel Toggle Bolt Anchors, 1/4"-20 (Package of Six)
Positively secures seats and table bases to decks or any accessory to cabin walls. Made of 304 stainless steel. Saves time and labor. Provides added strength . Add reinforced safety and comfort to pedestal installations . Works with all Garelick seat pedestal bases . For deck or cabin thickness from 3/8" to 3-5/8" (1 - 9cm), requires 1/2" (13mm) holes .
Part No: 21026:01
|
|
|
|
Home -> Engine Systems -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
|
|
|
|
Home -> Anchor & Docking -> Ladders, Ramps & Boat Hooks->Footrest/Steps
Heavy-duty aluminum footrest adjusts 5" vertically to provide added comfort for multiple users at helm. Angled 18° downward for more comfort when resting. Traction-grooved step surface with teak inserts has rounded design that helps to eliminate corner collisions. Bolts to boat.
Part No: 27516:01
|
|
|
|
Home -> Seating & Covers -> Seating -> Seat Hardware
Active Seat Suspension Systems absorb and minimize up to 75% of the shock, jolt, and vibration transmitted to the passenger from the forces of roll, pitch, and yaw. Made from rugged, high-tensile, anodized aluminum with stainless steel hardware. Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat . Easily mounts to almost any current seat. Standard bolt hole pattern allows for easy mounting beneath seat to the deck, a box, or the floor of a boat .
Part No: 77000:01
|
|
|
|
|
Home -> Engine Systems -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71091:01
|
|
|
|
Home -> Seating & Covers -> Seating
All weather seat support frame - classic arm chair comfort and ladder back design backrest. Ideal at fly bridge, helm station or fishing. Made for easy maintenance of high density, white polyethylene seat and back, thick, removable cushions snap to frame, thru-bolted hardware; tough anodized aluminum extrusions, stainless steel fasteners. W: 26. 5” (67cm), D: 17. 5” (44cm), H: 20” (51cm) .
Part No: 48460:02
|
|
|
|
Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71095:01
|
|
|
|
|
Home -> Engine Systems -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71096:01
|
|
|
