Top Sellers
Easy On Bottom Coating from OCEAN ACCESSORIES LL
Why paint when you can wax? If your boating is in low fouling fresh water or cold saltwater, consider new waxing technology instead of anti-fouling bottom paint. An easy-to-use, nontoxic, soft-wax coating for full-season protection. One bottle will cover a 24' boat. Recommended Usage: Fresh or intermittent salt water use; lasts one full season . Clear, nontoxic alternative to bottom paints . Coverage: One pint covers 24' hull . Drying Time: Dries in minutes, overnight curing before launch .
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
Micron CSC Antifouling Paint, Red, Quart from INTERLUX
Haul and relaunch without loss of performance The innovative copper-copolymer formula of Micron CSC provides a controlled release of antifouling biocide at the paint surface, which means that the longevity of the coating is related to the amount of paint applied. Can be applied over most paints in good condition. Micron CSC will not lose its effectiveness when hauled out of the water for extended periods of time (such as winter storage). Type: Copolymer . 2% Cuprous Oxide . Additives: None .
|
|
|
Scotch General Painting Masking Tape #2050 - 2" from 3M PRODUCTS
Use in a wide range of painting applicationsGeneral-purpose. Not for critical or extended outdoor use. Recommended Usage: General purpose masking or binding tape; adheres to previously painted or varnished surfaces . Material: Crepe paper with rubber resin adhesive . Removal Time: Three days .
|
Fiberglass Paint Stripper - Gal from KLEAN STRIP
Fiberglass Paint Stripper is specially formulated to remove paint from fiberglass. Water-washable.
|
WetOrDry™ Finishing Sandpaper - Ultra Fine 600 Grit, 5 Pack from 3M PRODUCTS
Ideal for wet sanding between coats of varnish, paint and other finishes. Made with silicon carbide, a sharp synthetic mineral that cuts fast and is satin smooth.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
Scotchgard Marine Liquid Wax, 500ml from 3M PRODUCTS
Durable wax actually bonds to your boat's surfaceSpecial formulation uses reactive chemistry to actually bond to your boat’s surface and provide exceptionally high gloss with lasting durability. Protects gelcoat and topside coatings from damaging ultraviolet radiation, and is excellent for use on gelcoat, topside paints, painted aluminum and marine metal parts. Uses reactive chemistry to bond to your boat's surface. Exceptionally high gloss with lasting durability.
|
|
|
Restorer & Wax - Quart from 3M PRODUCTS
Renews and protects gelcoat in one easy applicationRemoves heavy oxidation, chalking, fading, minor scratches, rust and exhaust stains, while providing protection on fiberglass/gel coat and marine topside paints. Unique formulation combines a rubbing compound with a special blend of waxes that restore shine and protect in one application.
|
Cleaner & Wax - Quart from 3M PRODUCTS
One-step processDesigned to remove light-to-medium oxidation, clean, polish and protect fiberglass gel coat and marine topside paints. A unique liquid formulation combines a compound with a special blend of waxes which restore shine and protect in one application.
|
On & Off Hull/Bottom Cleaner - Gallon from MARYKATE
Powerful cleaner removes marine growth from hull Removes waterline, algae, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.
|
On & Off Hull/Bottom Cleaner - Quart from MARYKATE
Powerful cleaner removes marine growth from hull Removes waterline, algae, rust and scum. Won't harm fiberglass. Brush-on/rinse-off, biodegradable formula.
|
Sea Safe Bottom Cleaner from STARBRITE
Formulated to remove even hardened deposits and tough stains from boat bottoms, this biodegradable cleaner works fast without harming the marine environment. Also works for cleaning baitwells, in-deck storage lockers and removing rust stains. Does not contain harsh acids or phosphates.
|
|
Bottom Paint & Coatings Maintenance
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->ViViD-Free Bottom Paint
Resistant to slime, algae, barnacles and other marine fouling, Vivid Free features a slow-eroding formula combined with PTFE and the latest biocide technology to minimize coating buildup and keep underwater surfaces smooth and clean. Colors are clean and bright and because it is copper-free, it is a good choice for regulated waters where copper-based paints are not allowed. Slow-eroding formula combined with PTFE and the latest copper-free biocide technology to minimize coating buildup.
Part No: 1126206
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil -> Bottom Paint & Coatings->ViViD-Free Bottom Paint
Resistant to slime, algae, barnacles and other marine fouling, Vivid Free features a slow-eroding formula combined with PTFE and the latest biocide technology to minimize coating buildup and keep underwater surfaces smooth and clean. Colors are clean and bright and because it is copper-free, it is a good choice for regulated waters where copper-based paints are not allowed. Slow-eroding formula combined with PTFE and the latest copper-free biocide technology to minimize coating buildup.
Part No: 1186206
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->VC-Offshore Antifouling Bottom Paint
Used by performance boatsVC Offshore combines superior antifouling performance with a super smooth low friction surface for the performance conscious boater. This high-strength, vinyl antifouling paint, fortified with Teflon® yields a hard, very smooth finish for maximum durability, reduced friction and increased performance. High copper loading fights fouling on performance boats in saltwater. Can be used in fresh, salt and brackish waters. Should not be applied over non-vinyl bottom paints.
Part No: R3950/1
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-QT
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Copper Bronze Specialty Bottom Paint
Mail-In Rebate Download Rebate Form (PDF) A traditional favorite Modified epoxy antifouling with an attractive, traditional bronze finish. Great for classic runabouts. 33. 2% cuprous oxide provides resistance to algae, barnacles, grass and zebra mussels. Bronze color. Type: Modified epoxy . Recommended Usage: Low to moderate fouling areas; year-round immersion; fiberglass, wood and steel hulls . Biocide: Cuprous oxide. Additives: None. Number of Coats Recommended: Two . Coverage: 100sq.
Part No: 1933-GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Pacifica Plus Bottom Paint
Designed for those who seek copper-free antifouling, this dual-biocide paint uses Biolux® Slime Blocking Technology to combat slime and ECONEA to ward off barnacles and zebra mussels. Its ablative action reduces paint buildup and helps to improve fuel efficiency. Suitable for all boats in all waters, this paint may be applied to fiberglass, wood, aluminum and steel hulls. S. EPA FIFRA registration application submitted. Call 1-800-BOATING for status update. Type: Ablative.
Part No: YBA260
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Pacifica Plus Bottom Paint
Designed for those who seek copper-free antifouling, this dual-biocide paint uses Biolux® Slime Blocking Technology to combat slime and ECONEA to ward off barnacles and zebra mussels. Its ablative action reduces paint buildup and helps to improve fuel efficiency. Suitable for all boats in all waters, this paint may be applied to fiberglass, wood, aluminum and steel hulls. S. EPA FIFRA registration application submitted. Call 1-800-BOATING for status update. Type: Ablative.
Part No: YBA263
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1137806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1278GA
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1187806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Trinidad Antifouling Bottom Paint
The highest copper loading in the Pettit line Trinidad has earned its reputation over many years by providing excellent long-lasting protection in the toughest antifouling environments. A very high copper content in a hard epoxy base provide a durable and effective finish for both power and sailboats. A good choice for tropical and other warm waters with extreme fouling conditions. Recommended Usage: High fouling areas, year-round immersion, fiberglass, wood and steel hulls . Additives: None.
Part No: 1167806
|
|
|
|
Home -> Paint & Maintenance -> Paint, Varnish & Teak Oil->Ultima SR 40 Paint
Ultima® SR-40 utilizes a high cuprous oxide load (40%) combined with the power of Irgarol to offer outstanding dual biocide, multi-season control in all types of fouling. Its ablative surface wears away with use providing a continuous supply of fresh biocides while eliminating the need for sanding. Ultima® SR-40 contains PTFE for added performance and reduced friction. It can be hauled and re-launched without repainting. Unique controlled erosion minimizes build up & keeps surface smooth.
Part No: 1109206
|
|
|