Welcome! Please Sign-In
Top Sellers
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Outboard Lock - Merc/Mariner (40hp), 1/2" x 20 thread from MCGARD
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting. Comes with two keys. *Fits: OMC 6-30hp, Merc/Mariner 8-25hp, Yamaha 9. 9-40hp, Suzuki 8-13hp.
Motor Mate Lifting Davit from FORESPAR
Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.
Nova Lift™ from FORESPAR
Nova Lift™ from FORESPAR
Forespar's Nova Lift products combine elegant styling with superb strength and function. Other brands swing left and right without control. Nova Lift comes with a stainless-steel lower mounting tube that will accommodate 30" height rails. Vessels with rails higher than 30" will require the use of a deck pad (not included) to raise the installation to the proper height. The Nova Lift with Winch is ideal for trawlers and motor yachts where sailboat winches are not available. 220 lbs.
Nova Davit Dinghy Lift from FORESPAR
Nova Davit Dinghy Lift from FORESPAR
Longer reaching arms use strong, lightweight Marelon components The Nova Davit system represents the "State of the Art" for styling and function. Like all Nova products, a very high-standard finish will make the right statement about your boat. The neat folding feature stows the davit system flush with your boat's stern. The maximum safe working load is 300 lbs. Nova Davit conveniently folds inward to maintain boat slip length or remove them completely for stowage or racing.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Swim Platform Bracket, 72-84IN from AFI
Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).
Deluxe Windshield Washer Kit from AFI
Deluxe Windshield Washer Kit from AFI
Install your own windshield washer systemFits new or existing AFI Deluxe wiper arm and blade sets, with all the parts to outfit two wiper arms. The kit includes a 3 liter water tank with mounting bracket (8. 5"H x 7"W x 4. 5"D), 12V pump motor and 16' below deck clear tubing, 6' above deck black tubing, clips and sprayer fittings. You supply wiring, an in-line 3A fuse and On-Off momentary switch.
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA
Ladder Storage Mounting Bracket from GARELICK
Ladder Storage Mounting Bracket from GARELICK
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Bracket Motor Mounts

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Part No: 521-100ST
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Part No: 521-125AL
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK Home -> Engine Systems -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71090:01
Auxiliary Outboard Bracket, 15-1/2" Vertical Lift, 7.5hp-25hp HP Rating from GARELICK Home -> Engine Systems -> Motor Mounts->4-Stroke Auxiliary Outboard Brackets
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Part No: 71091:01
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE Home -> Engine Systems -> Motor Mounts->Rail Mount Outboard Bracket
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
Part No: WMMNT WMM-2
Model 71095: Up to 25 Motor Weight Not to Exceed: 148 lbs. from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71095:01
Model 71095: 25 to 40 Motor Weight Not to Exceed: 248 lbs. from GARELICK Home -> Engine Systems -> Motor Mounts->Hydra Power-Assisted Outboard Engine Brackets
Designed to accommodate bigger 2 and 4-stroke engines, the heavy duty 1/2" thick structural aluminum extrusion affords effortless operation–it can raise and lower auxiliary engines in less than 20 seconds. Features 12V self-contained marinized hydraulic actuator, aircraft stainless steel hardware and engineered bronze bushings at pivot points, a 2000lb. tensile strength engine safety cable and a triple coat protective finish. Range of Motion Up/Down: 13 1/4" vertical travel .
Part No: 71096:01
Transom Adapter for Bracket from FULTON Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
Part No: TA600 0134
Fixed Mount Motor Bracket from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts
A permanent fixed-height mount for an auxiliary or trolling motor. Tough 18-8 stainless steel brackets.
Part No: 71074:01
4-Stroke Auxiliary Outboard Bracket from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.
Part No: 71056:01
Replacement mounting board 9-1/2" x 10-3/4" x 2" from GARELICK Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Measures 9 1/2'' x 10 3/4'' x 2'' and fits both Lift & Lower and Stationary outboard brackets.
Part No: 99057:01
Outboard Bracket Lock, Brass from MASTER LOCK Home -> Engine Systems -> Motor Mounts -> Motor Mounts
Help make your outboard less attractive to thieves, and also keep it from vibrating loose while running. The vinyl-clad steel tube slides over the mounting screws and is secured with a hardened brass padlock. Padlock is recessed inside the tube to protect against cutting.
Part No: 430-DSPT
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11