Top Sellers
Helmsman Compass Cover from RITCHIE NAVIGATION I
Spare bulbs, covers and other accessories for Ritchie Compasses. Leveling block for bulkhead mounted compasses Thumb screw for bracket mounts.
|
Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).
|
Swim Platform Bracket, 72-84IN from AFI
A simple way to mount your swim platform. 304 stainless steel brackets, 1. 5"W flat bar stock for the underside of the platform and transom.
|
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights RailLight charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.
|
HD 5,000lb. Drop-Leg Trailer Jack from FULTON
HD 5,000lb. Drop-Leg Trailer Jack Heavy-duty fixed-mount with a 5,000lb. capacity and a corrosion-resistant zinc finish.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Windex 10 Sport Wind Indicator from DAVIS INSTRUMENTS
Easy to remove for trailering In winds as light as 2/10th knots the sapphire suspension bearing allows the Windex to seek wind direction. No other wind vane in the world is as sensitive to extreme light air and small puffs, or as responsive when the breeze picks up. For small boats and dinghies. Includes a 10" vane, adjustable tacking tabs and glass reinforced polycarbonate J-Base for side, top or front of mast mounting. Stands only 9. 25" tall and weighs 1.
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Arrow Style Windvane from RONSTAN
Small boat wind indicators feature quality construction at a fraction of the price of other windvanes, so they are a great choice for junior sailors who might be rough on the equipment. Ronstan's new vanes are balanced for accuracy and molded in UV-stabilized nylon. The aluminum shaft can be removed from the mast bracket for trailering or security. Both the Pennant and Arrow style indicators include adjustable tacking angle arrows.
|
Ladder Storage Mounting Bracket from GARELICK
For storing ladder on side coaming or transom. Identical to brackets included with each ladder.
|
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
|
|
Bracket Trailer Lighting
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Waterproof, Low-Profile Thermoguarded Trailer Lights
Top-quality, multi-functional trailer lights feature waterproof capsules to protect bulbs from corrosion and thermoshock during boat launching and loading. Tough polycarbonate lens and rugged duramold housing. The kit includes a right and left tail light, license bracket, wire harness, hardware and instructions. The replacement lens kit includes two stop/turn/tail lenses, two side lenses and eight replacement screws. For any trailer, including those with overallwidths of 80" or more.
Part No: 01-6530-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Submersible, LED Trailer Lighting Kit for Trailers Over 80" Wide
Built to withstand the rigors of trailering and they're submersible!Retrofit your over 80"W trailer with these attractive Hi Count Multi-LED Lights designed with an appealing, high-tech look or use them as replacement lights. They are fully submersible with circuit boards fully encapsulated to provide protection against corrosion and vibration. Kit includes two LED stop/tail/turn lamps, license plate bracket, trailer harness and mounting accessories. Includes new waterproof connector kit.
Part No: 52472-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Light Kits->Submersible, LED Trailer Lighting Kit for Trailers Over 80" Wide
Built to withstand the rigors of trailering and they're submersible!Retrofit your over 80"W trailer with these attractive Hi Count Multi-LED Lights designed with an appealing, high-tech look or use them as replacement lights. They are fully submersible with circuit boards fully encapsulated to provide protection against corrosion and vibration. Kit includes two LED stop/tail/turn lamps, license plate bracket, trailer harness and mounting accessories. Includes new waterproof connector kit.
Part No: 52462-5
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Under 80"W Trailer Lights
Gasketed lenses help keep water away from the bulbs and contacts of these lights, which are designed for under 80" wide trailers. The left light includes a license plate illuminator. Kits are available with and without sidemarker lamps. High-impact acrylic lens and rugged duramold housing. Lighting kits include two tail lights, trailer harness, license bracket, installation kit and instructions.
Part No: 01-6523-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Sealed Oval Trailer Light Kit
These completely waterproof, premium lights can be used for most custom trailers. Their polycarbonate lens is sonically welded to the housing to provide a permanent seal. They can be used on both the curbside and roadside of your trailer and are legal in either the horizontal or vertical position. The complete assembly includes the two lights, brackets, grommets and wiring plug.
Part No: 01-5308-81
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 01-6533-72
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Submersible Under 80"W Trailer Lights
Top-of-the-line trailer light system designed for trailers under 80" wide. These submersible lights use a 'trapped air' technique to protect the bulb and contacts when submerged. Black grime has a closed bottom to prevent water and road grim from entering the light. High impact acrylic lens and rugged duramold housing. Kit includes right tail light, left tail trailer harness, license bracket, wire harness, hardware and instructions.
Part No: 01-5264-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 01-6532-72
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Waterproof, Low-Profile Thermoguarded Trailer Lights
Top-quality, multi-functional trailer lights feature waterproof capsules to protect bulbs from corrosion and thermoshock during boat launching and loading. Tough polycarbonate lens and rugged duramold housing. The kit includes a right and left tail light, license bracket, wire harness, hardware and instructions. The replacement lens kit includes two stop/turn/tail lenses, two side lenses and eight replacement screws. For any trailer, including those with overallwidths of 80" or more.
Part No: 01-5249-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 90642
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting -> Trailer Lighting->Waterproof, Low-Profile Thermoguarded Trailer Lights
Top-quality, multi-functional trailer lights feature waterproof capsules to protect bulbs from corrosion and thermoshock during boat launching and loading. Tough polycarbonate lens and rugged duramold housing. The kit includes a right and left tail light, license bracket, wire harness, hardware and instructions. The replacement lens kit includes two stop/turn/tail lenses, two side lenses and eight replacement screws. For any trailer, including those with overallwidths of 80" or more.
Part No: 01-5248-71
|
|
|
|
Home -> Trailer & Parts -> Trailer Lighting->Universal Hi Count® LED Under 80" Wide Trailer Lights
Don’t worry about water damage anymore! Cutting edge Hi Count® Multi- LED Lights are the best in our line of trailer lights. They’ll make your old trailer look new with their attractive high-tech look. They are for trailers under 80" wide. Durable high-impact acrylic lens and corrosion-resistant Duramold® housing. Fully submersible. Left hand light features an LED license plate illuminator. Lights mount with two mounting studs on 2" centers. Includes new waterproof connector kit.
Part No: 51982-5
|
|
|