Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.

RailLight™ Clamp-On Solar-Powered Light from SIMPLY BRILLIANT
Solar-Powered Sol Lights™ RailLight™ charges all day and shines all night! Clamp this solar-powered portable light to any railing, coaming, stanchion, step, ladder or dock box for up to eight hours of light with just an eight hour charge of sunlight. Coated stainless steel finish resists corrosion. Comes with two clamps: one for round railings up to 1-1/4", and a transom clamp for up to 2" thickness. Dual 700mA rechargeable and replaceable NiCad batteries.

Clamshell Vent, 9/16"H x 2"W x 2"L from PERKO
Type: Passive clamshell vent Material: Chrome-plated brass Warranty: Five years.

C-Strobe Personal Strobe Light from ACR ELECTRONICS
This waterproof, corrosion-resistant PFD light delivers more than eight hours of intense one-second interval flashes on two AA alkaline or 1. 5V lithium batteries (not included). Waterproof (to 10'), corrosion- impact- and temperature- resistant ABS case Twist "ON-OFF" control can be operated by gloved hands and in adverse conditions Slim, lightweight design. Comes with an adjustabe Velcro® strap and wrist loop Meets USCG (161. Flash rate: 60 ± 10 flashes per minute nominal.

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

FNPT Brass Reducer Fuel Fitting, 1/4" NPT X 1/8" from MOELLER
High quality brass reducer.

1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .

1/4" NPT X 3/8" Brass hose barb from MOELLER
1/4 NPT X 3/8" Brass Hose barbs with male threads.

Brass-Bristle Brush from SEAFIT
Solid brass bristles won't rust or corrodeLarge, plastic utility brush has solid brass bristles that won’t rust or corrode. Brass bristles are slightly softer than stainless steel and are therefore less intrusive to surfaces. Molded plastic handle provides solid, controlled grip. Bristles: 5/8"D. Overall length: 8 1/2". Molded plastic handle provides solid, controlled grip. 5/8"L bristles.

Vent, Chrome Plated Brass, Thru Hull, 90 degree Elbow from MOELLER
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.

Solid Brass Vertical Action Galley Pump from FYNSPRAY
Vertical plunger pump with a gracefully arched spout. 50 strokes per gallon. 1"diameter tube. Fits 1/2"–5/8" hose. Requires 8 1/2" clearance below counter surface; 9 3/4" above Material: Brass. Capacity: 50 strokes/gal. Dimensions: 9 3/4"H. Cutout Size: 1 1/8". Clearance: 8 1/2".

1-7/8" Polished Brass Flush Ring Pull from ABI
Highly polished brass . Convenient flush-fitting ring pull for cabinets, small doors, and hatches. . 1-7/8"L x 1-1/2"w . Requires four #5 fasteners .