Above Deck Fuel Tank with Mechanical Vent Gauge (15-Gallon) from MOELLER
Specifcally designed for use in Boston Whalers, Carolina Skiff and Key West bench style, center console, pontoon, deck and jon boat designs, this tank provides a positive seal with Moeller-exclusive injection molded 2-1/4" fill neck. The mechanically vented fuel cap is easy to grip and the 90 degree, 1/4 NPT fuel withdrawal elbow rotates 360 degrees, which eliminates fuel hose kinking. Includes an easy-to-read mechanical direct-sight gauge.

Lev-O-Gage Clinometer - Standard, 45-0-45 Degrees, 3.5" width from SUN COMPANY
The perfect device for attaining an optimum angle of heel. Black bodies with flex tubes and white engraved numerals and an easy-to-read scale.

Bronze Threaded Nipple, 3/4" Pipe, Close Length from GROCO
Bronze plumbing fittings.

Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

Small Bronze Ball Valve with Brass Ball, 1/4" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.

Drain Plug, Bronze 1/2" NPT Threaded from MJS MANUFACTURING
Don’t forget to install your trailerable boat’s drain plug and get that sinking feeling! Get the Plug Boss instead. Put the bright red anodized aluminum plug holder in the most logical place possible, on the trailer winch handle, and never forget to reinstall your drain plug when you launch your boat (or remove it when you haul out). Choose a Plug Boss to fit either the 1" rubber tee handle drain plug or a 1/2" pipe threaded bronze drain plug.

1-1/2" Bronze Check Valve from SEAFIT
For vertical or horizontal use in fuel or water systems to maintain pump prime or prevent backflow to fluid source. The unique design minimizes fluid turbulence and flow restriction.

CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.

Replacement Pressure Switch from GROCO
Paragon Jr. Pressure Water System The Paragon Jr. can handle the demands of multiple outlets, either as a saltwater washdown or freshwater system pump. Includes a 12V bronze rotary pump, pressure gauge, strainer and PST-1 accumulator tank. Solid-state dry-tank shutoff Operates between 20 and 40psi For boats to 45' 7 GPM Draw: 30A starting, 26A running Self Prime: 6' Dimensions: 12"L x 7"H x 8"dia. (pump) 12"L x 8"dia.

12V Reversible Flo-Master Vane Pump from GROCO
Rigid-vane pumps for pumping water, oil or diesel. Positive-displacement pump is self-priming to 2’. Long-lasting, continuous-duty, ignition-protected motor has ball bearings and a #316 stainless-steel shaft Application: General light to intermittent duty utility pumping . Gallons Per Minute: 6. 5 (oil) . Material: Bronze pumphead, stainless shaft . Port Sizes: Male garden hose or 1/2" female NPT inlet & outlet . Dimensions: 3 3/8"H x 4 3/8"W x 7 1/2"L .

Nylon Tee, NPT Threaded, 1/2" from SEAFIT
Nylon Tees, NPT Threaded.

3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.

Full-Flow In-Line Ball Valve, 1" NPT from GROCO
These in-line ball valves permit unrestricted flow in all sizes. Each features a compact bronze body, chrome-plated brass ball with Teflon seats for long life, 304 stainless steel handle, bonding attachment screw and a drain plug.

Oval Deck Pipe from SEAFIT
Accepts line, thimble, shackle and chain to 3/8". Hook under cover holds chain and cover in place. Material: Chromed-plated bronze . Flange: 6. 25" x 4. 5" . I. D. : 4-3/6"L x 2-3/8"W .