Acetal Thru-Transom Scupper from WEST MARINE
One-way rubber flapper valve and thru-hull fitting. For 1-1/2"ID hose. Overall length: 6-1/4". Installation hole size: 2". Max.

Vent, Chrome Plated Brass, Thru Hull, 90 degree Elbow from MOELLER
90° Elbow Chrome Plated Brass Thru Hull Vent Accommodates 5/8" I. D.

5200 Polyurethane Adhesive/Sealant, White, 3oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

5200 Polyurethane Adhesive/Sealant, White, 1oz. from 3M PRODUCTS
Tenacious bonds and watertight seals above or below waterline Provides exceptionally strong adhesion, yet stays flexible after it cures; may be used above or below the waterline. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable up to four hours. Cures in 5–7 days with no shrinking. Recommended Usage: Permanent bonding, above and below water. Removal: Mechanical removal .

Gen-Sep Water Separator, 2" Diameter, Gas In/Out 2.0", Water Outlet 1.5" from CENTEK INDUSTRIES
Position the water drain from the Gen-Sep just below the water line to eliminate water splash, especially important for nighttime operation. Gen-Sep will remove nearly all of the cooling water from the exhaust. That water can then be drained to a hull fitting just below the waterline, thus eliminating excess noise often created by splashing and pulsating water flow at the exhaust outlet. A slight downward angle is required for both the exhaust outlet and the exhaust gas tube. Dimensions: 10.

Waterguard Cartridge Filter from SHURFLO
No more "boat water" taste! Enjoy great tasting, healthy, clean water on your boat or RV. Filters chlorine, sediment, lead and cysts. Features easy installation and a no-mess, disposable, quick-twist carbon block filter that you can change in seconds. Kit includes head, cartridge, winterizing diverter, fittings and mounting hardware. Filter is 12"H x 2. 5"W. One year warranty. Ensures drinking water tastes good and is safe to drink.

Marelon Intake Scoop Strainer, 1-1/4" Max. Thru-Hull Si from FORESPAR
Made of durable composite material and engineered to exceed ABYC and ISO standards.

2" Marelon Mushroom Head, 3"L from FORESPAR
253 Series Hose tailpipe/Mushroom Head.

Bronze Threaded Nipple, 3/4" Pipe, Close Length from GROCO
Bronze plumbing fittings.

Small Bronze Ball Valves with Brass Ball, 3/8" NPT from APOLLO
Free-floating, chrome-plated brass ball. NPT threads. Stainlesssteel handle. Note: These are for inline, non-saltwater applications.

3-Way Bronze Ball Valve, 1/2" Size (NPT) from APOLLO
Use in place of a "T" fitting to switch between two tanks.

CP Bronze Strap Hinge - 1.125" H x 6" W from PERKO
Chrome plated bronze. Pin Height: 1-1/8" by 6" open width. Each hinge requires six #10 fasteners.

Mushroom Anchor, 8lb., Black from GREENFIELD PRODUCTS
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.

Nylon Tee, NPT Threaded, 1/2" from SEAFIT
Nylon Tees, NPT Threaded.

3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.