Top Sellers
Folding Teak Pedestal Table from SEATEAK
Teak tabletop measures 16"W x 25"L closed and 32"W x 25"L open and has a fold-down support leg. A built-in drink holder that accommodates four glasses, or binoculars and two glasses. Clips mount the unit firmly to all pedestal guards, whether expanded or collapsed, so there's no drilling. (Note: the steering post must not protrude beyond the front of pedestal guard or the table will not be able to clip properly to the guard. Includes installation hardware.
|
Acrylic Canvas Drink Holder, 5-1/8"W x 5-1/8"H x 3-9/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
PVC with Polyurethane Mesh Rope Bag, 11-13/16"W x 16-11/16"H x 8-11/16"L from RONSTAN
Ronstan rope bags can be removed and stored inside the boat when not in use; all that remains in sight is the soft white plush side of the loop attachment panel—and no sharp hooks! RF3700 Series Acrylic Canvas Bags Acrylic rope bags have a classic navy style. They are lightweight, water resistant and will retain shape. Made of white, water-repellent PVC with black water-draining polyurethane mesh, these rope bags are extremely durable. Technical features include carbon tubes for easy opening.
|
8-1/2" Hatch Holder, Adjustable, for Hatches to 10lb. from MOONLITE MARINE
Stainless, spring-type holders “pop” into place to hold hatches, doors, table leaves, etc. Easy to install. Adjustable model allows opening between 10° and 80°.
|
Travel Mug from WEST MARINE
Wide-bottom stainless-steel vacuum travel mug is safe to take anywhere. It has a non-skid bottom which makes it almost spill-proof. This mug has a sip-through top and can be used for hot and cold beverages. Stainless-steel, vacuum driver’s mug is designed specifically to fit securely in most cup holders. This mug holds your favorite hot or cold beverage, has a secure sip-through top and stays cool to the touch. Travel style wide base Drivers style cup-holder size base.
|
Teak Binocular Rack 7X50 from SEATEAK
Teak Accessories for Cabin & Cockpit Using only plantation-grown teak, these fine accessories make life aboard more pleasant.
|
Cabin Hatch/Vent from LEWMAR
Designed to fit Lewmar hatches or to be mounted on deck, this vent features a built-in gasketed bung that makes it 100% watertight. The trim piece is available for thru-deck installations. Includes mounting screws. Type: Passive vent . Material: Acrylic composite . Dimensions: 2-1/4"H x 6-3/4" Dia. . Cutout Size: 3" .
|
Stainless Boat Hook Holders from PERKO
Polished stainless steel holders for poles to 1. 5" dia. 3. 5" L x 1" W. . . Sold in pairs.
|
Propane Storage Locker Bag from MAGMA PRODUCTS
propane bottles outside of your boat for safety.
|
Compressor Cooler 33qt. AC/DC from DOMETIC ENVIRONMENTAL
Introducing the Coolmatic® CF Series. These units offer ample storage for refrigerated and frozen foods, as well as many technical extras and problem-free operation from all on-board and AC adapter systems High-Impact Engineered Polymer Cabinet will not Dent or Rust Two-Tone Gray Housing Matches Most Automotive Interiors Top Lid Locks, Detaches and Folds Up Carrying Handle or Carrying Grip for Easy Transport Removable Coated Wire Basket Resists Freezing (not included on the CF18 or CF-35.
|
AC Adapter for Coolmatic Fridge from WAECO ADLER BARBOUR
Kit turns an insulated space into a 12V refrigerator This compact do-it-yourself kit is ideal for easily converting an existing, passive insulated cooling area into a full, high performing compressor-powered refrigerator unit. AC Adapter offers problem-free connection to 110/240 volts AC power.
|
|
|
Princess Propane Range - 3-Burner from SEAWARD PRODUCTS
These Seaward ranges were rated #1 by Practical Sailor and Powerboat Reports. They feature stainless-steel construction and fuel lines, AGA approved thermocouple valves that shut off in case burners are extinguished, and piezo electric ignition that needs no electrical hookup. Safety clips secure range tops to eliminate rattling. Thermostatically-controlled 8000 Btu ceramic oven maintains steady temperature, distributes heat evenly, makes cleaning easy and conserves fuel. Built to ANSI Z. 21.
|
Natural Ice - 2 lb. from IGLOO
Natural Ice saves you time and money because it eliminates the need to repurchase ice over and over gain. Flexible, durable and reusable sheets contain pure water, freeze faster and last up to two times longer than chemical gels.
|
Alcohol/Electric Stove - 2-Burner from ORIGO
Safety and convenience at the dock or underway. These flush mount stoves allow you to cook with shore power when dockside or alcohol when underway. They feature electronic touch pads to control electric cooking elements. The stovetop easily flips up to allow access to remove the fuel canisters for simple filling. Fuel/Power: Alcohol/Electric Safety Features: Closed lid keeps On/Off Switch set to off. Configuration: Double Burner Cooktop Overall Dimensions: 14 7/8'' W x 6 3/8''D x 24 1/2''L .
|
|
Cabin and Galley Drink Holders
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Folding Drink Holders
4 1/8" square and 7/8" thick when closed.
Part No: 84012WH
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Folding Drink Holders
4 1/8" square and 7/8" thick when closed.
Part No: 84012BK
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Recessed Drink Holders
Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth.
Part No: GH33-W1
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Recessed Drink Holders
Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth.
Part No: GH33-B1
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Suction Mount Drink Holder
Secure suction mounting drink holders safely cup your drink containers in the pilot room or galley. Holds large coffee mugs and insulated drinks. High-density polypropylene construction.
Part No: 67720W
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Suction Drink Holders
Handy, compact drink holder has a suction cup that can be placed on the back, or on the bottom, to keep your favorite beverage in place, on any smooth, flat surface.
Part No: 2151-1
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Suction Mount Drink Holder
Secure suction mounting drink holders safely cup your drink containers in the pilot room or galley. Holds large coffee mugs and insulated drinks. High-density polypropylene construction.
Part No: 67723W
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Suction Drink Holders
Handy, compact drink holder has a suction cup that can be placed on the back, or on the bottom, to keep your favorite beverage in place, on any smooth, flat surface.
Part No: 2151-8
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Suction Mount Drink Holder
Secure suction mounting drink holders safely cup your drink containers in the pilot room or galley. Holds large coffee mugs and insulated drinks. High-density polypropylene construction.
Part No: 67722W
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware -> Drink Holders->Recessed Drink Holders
Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth.
Part No: GH43W1
|
|
|
|
Home -> Cabin & Galley -> Appliances & Cookware->Recessed Drink Holders
Corrosion-proof, flush-mount drink holders with four drain holes in the bottom. Standard size - 3 1/2" Flange 2 7/8" Depth.
Part No: GH43-B1
|
|
|
|
Home -> Cabin & Galley -> Containers & Storage -> Teak Storage Products->Teak Drink Holders
Using only plantation-grown teak, these fine accessories make life aboard more pleasant. Solid teak holders complete with mounting clamps for attachment to pedestal guards. 3-Drink, 11"L x 3-3/4"W x 2-3/4"H. Insulated Three Drink Holder, 13"L x 4"W x 3-1/2"H. Four Drink Holder 14-1/4"L x 4"W x 3-1/2"H. Insulated Four Drink Holder 16-1/2"L x 4"W x 3-1/2"D .
Part No: 62654
|
|
|