Welcome! Please Sign-In
Top Sellers
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
Snap-On Cable Cover, 1/4" Wire Dia. from DAVIS INSTRUMENTS
White vinyl cable covers in 6' lengths. Tubes split down length and install in seconds.
33C Red Jacket Cable, 18' from TELEFLEX
33C Red Jacket Cable, 18' from TELEFLEX
The most widely used cable type in the world. 8" minimum bend radius. Cable adapter kits available for use with Mercury, MerCruiser, Johnson/ Evinrude, and OMC sterndrive. 3" travel.
4300BC TFX Cable - 20' from TELEFLEX
4300BC TFX Cable - 20' from TELEFLEX
TfXtreme's unique design assures smoothness and efficiency–with hardly any lost motion–even in the longest and most complex cable routings! This means superior feel at the control, in any boat–performance that had been considered "impossible". TfXtreme achieves the "impossible". Patent-pending splined core to achieves the impossible–easy movement and minimum lost motion.
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
SW Inverter/Charger Remote Panel with 50ft. Cable from XANTREX
Designed for use with SW and PS inverter/chargers, the SWRC is a full-function remote control with backlit LCD display. The remote control comes with a standard 25’ (7. 5 m) cable or a 50’ optional (15 m) cable.
Big-T Rotary Helm from TELEFLEX
Big-T Rotary Helm from TELEFLEX
Die-cast gears and added shaft support help it hold up to tough use. For single or twin station powerboats up to 34'. Boat Type: Inboards and power-assisted sterndrives, up to 34' . Steering Type: Rotary . Dimensions: 6-13/16"D behind dash front x 6-3/8"W x 5-1/16"H . Steering Wheel: Up to 20". Not included . Steering Wheel Shaft: 3/4" tapered . Cable Type: QC II SSC61XX or SSC72XX . Mounting Hardware: Requires bezel kit sold separately .
Hot Foot Throttle Omc/Merc from T-H MARINE
Hot Foot Throttle Omc/Merc from T-H MARINE
Replaces your hand throttle with a foot pedal that makes you feel like you're behind the wheel of your automobile. When released, the Hot Foot automatically returns your engine to the idle position thanks to a strong stainless spring. Mounts directly to the deck of the boat and uses standard control cables. Aluminum pedal. Stainless hardware. Non-stick bearing surfaces.
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
Side-Mount with Trim & Tilt 4-Wire from TELEFLEX
SL-3 is specifically engineered for installation without control modifications. Port or starboard installation with various cable-entry angles. Adapts for push or pull mode without tools. “Easy-On” cable design means no shift or throttle adjustments. Optional trim switch in handle grip for one-hand operation. Functions: Gearshift/throttle . Levers: Dual functions—each lever controls throttle and shift . Lever Material: Metal . Features: Push button for neutral Adjustable brake .
Twin Straight Handle Control, Chrome from TELEFLEX
Twin Straight Handle Control, Chrome from TELEFLEX
Stylish low profile flush mount design available in several function and style options. For single or dual station applications with single or twin engines. Single function (each lever controls shift or throttle). Suits 33C type cables.
Slimline 500Gph Pump Kit from RULE INDUSTRIES
Slimline 500Gph Pump Kit from RULE INDUSTRIES
Portable pump goes where the water is and gets rid of it fastThese hand-deployed, submersible pumps are perfect for pumping out hard-to-reach places where water collects. No slouch when it comes to capacity, they are capable of pumping 500gph and generating a 13-foot head. Powered by your boat's 12V system, they work great for diesel or water transfer, deck showers, washdowns, and baitwell tank aeration. Purchased alone, pumps include a 13-foot power cable with battery clips.
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
Off/1/All/2 Battery Switch, 380 Continuous Amps, 850 Intermittent Amps from PERKO
For high-amperage applications like diesel engine starters, large inverters and windlasses. Reinforced polycarbonate body, 1/2"dia. brass terminal connections and an alternator field disconnect. Alt. Field Disc. : Yes . Switch Material: Reinforced Polycarbonate. Terminal Material/Size: Brass 1/2"dia. . Switch Dimensions: 5-1/4"sq. x 3-3/8"H .
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
Zinc Grouper Anode from CANADA METALS
Zinc Grouper Anode from CANADA METALS
Supplements your boat's existing anodes An excellent anodic device to supplement a vessel’s existing anode system, especially to counteract stray current from defective shore power. Clip to bolt on outdrive. Clip to grounding strap if possible or wire items together with copper wire and clip to wire. Do not connect to negative battery terminals. Dimensions: 8 1/4"L x 3 1/4"W x 1 3/8"D.
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
MA2 Fire Extinguisher, HFC-227, 250 cu. ft. from FIREBOY XINTEX, INC.
MA2 Fire Extinguisher, HFC-227, 250 cu. ft. from FIREBOY XINTEX, INC.
The fastest and safest way to combat an engine room fire. HFC-227ea agent leaves no residue, unlike dry chemical extinguishers. Constructed of salt-resistant bronze, brass and stainless steel components; tough tempered, corrosion-resistant cylinders and O-ring seals at all critical assembly points. To select a system determine the volume of the engine compartment to be protected in cubic feet and select the model that meets or exceeds the calculated system volume of the engine compartment. ft.

Cable LOWRANCE

7-Pin Lowrance Sonar Adaptor Cable from MOTOR GUIDE Home -> Fishing -> Trolling Motors->Sonar Ready Digital Wireless Lowrance Series Trolling Motors
Motorguide sonar ready adaptor, connect your fishfinder or sonar equipment.
Part No: 8M4000386
X67C Color Fishfinder from LOWRANCE Home -> Electronics -> Fishfinders -> Fishfinders->X67C Color Fishfinder
This affordable, color unit packs lots of features into a compact package. The bright 256-color 1/4 VGA active matrix display has impressive resolution and color in a small size. Advanced receiver design offers enhanced sensitivity and target detail, as well as greater resistance to electrical interference. D. Model 5468715 is designed for salt water. Features special Skimmer salt water transducer with tighter cone angle to penetrate deeper depths. Model 4786562 is optimized for fresh water.
Part No: 000-0110-50
W75L, Bow-Mount, 75lb. Thrust, 24V, 48" Shaft from MOTOR GUIDE Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Sonar Ready Digital Wireless Lowrance Series Trolling Motors
Trolling motors with built-in fishfinder transducer You're now free to move about the deck, free from interference and free to navigate using the finest sonar picture you've ever laid eyes on. And fear no big water. It's beefed-up with a rugged, Cradle Lock mounting system and a shaft that's 33% stronger than the competition. Easier stow and deploy, and oversized brushes make life in the chop a little smoother. See how liberating Wireless freedom can be, see bottom contours like never before.
Part No: 970100110
W55L, Bow-Mount, 55lb. Thrust, 12V, 54" Shaft from MOTOR GUIDE Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Sonar Ready Digital Wireless Lowrance Series Trolling Motors
Trolling motors with built-in fishfinder transducer You're now free to move about the deck, free from interference and free to navigate using the finest sonar picture you've ever laid eyes on. And fear no big water. It's beefed-up with a rugged, Cradle Lock mounting system and a shaft that's 33% stronger than the competition. Easier stow and deploy, and oversized brushes make life in the chop a little smoother. See how liberating Wireless freedom can be, see bottom contours like never before.
Part No: 970100100
W75L, Bow-Mount, 75lb. Thrust, 24V, 60" Shaft from MOTOR GUIDE Home -> Fishing -> Trolling Motors -> Trolling Motors, Bow->Sonar Ready Digital Wireless Lowrance Series Trolling Motors
Trolling motors with built-in fishfinder transducer You're now free to move about the deck, free from interference and free to navigate using the finest sonar picture you've ever laid eyes on. And fear no big water. It's beefed-up with a rugged, Cradle Lock mounting system and a shaft that's 33% stronger than the competition. Easier stow and deploy, and oversized brushes make life in the chop a little smoother. See how liberating Wireless freedom can be, see bottom contours like never before.
Part No: 970100120
10" Standard Power Mount for Raymarine Dome from SEAVIEW Home -> Electronics -> Radars->Standard Power Mounts
Stylish airfoil-shaped struts that raise the antenna above shipboard obstructions. Power Tower compact bases fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the strut and the antenna. A hole/rubber grommet is provided for easy internal routing of cables. These mounts are not Light Bar–compatible; Power Mount Plus Radar Antenna Mounts have Light Bar Option (see WM #6965800). . Raymarine mounts fit the 2kW and 4kW Pathfinder domes .
Part No: PMF-10R-7
10" Standard Power Mount for Universal* 12" to 18" Dome from SEAVIEW Home -> Electronics -> Radars->Standard Power Mounts
Stylish airfoil-shaped struts that raise the antenna above shipboard obstructions. Power Tower compact bases fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the strut and the antenna. A hole/rubber grommet is provided for easy internal routing of cables. These mounts are not Light Bar–compatible; Power Mount Plus Radar Antenna Mounts have Light Bar Option (see WM #6965800). . Raymarine mounts fit the 2kW and 4kW Pathfinder domes .
Part No: PMF-10U-7
5" Standard Power Mount for Raymarine Dome from SEAVIEW Home -> Electronics -> Radars->Standard Power Mounts
Stylish airfoil-shaped struts that raise the antenna above shipboard obstructions. Power Tower compact bases fit on most radar arches and cabin roofs. Mounting holes are predrilled for both the strut and the antenna. A hole/rubber grommet is provided for easy internal routing of cables. These mounts are not Light Bar–compatible; Power Mount Plus Radar Antenna Mounts have Light Bar Option (see WM #6965800). . Raymarine mounts fit the 2kW and 4kW Pathfinder domes .
Part No: PMF-5R-7
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12