Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

Lateral Starboard Clamcleat, 1/4"–3/8" Rope Dia., 3/16"H x 2"W x 2-7/8"L, 1/4" Fasteners from CLAMCLEAT
.

Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.

6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Cleat, European Jam from WEST MARINE
Strong nylon jam cleat commonly found on most European boats.

Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.

60mm Racing Fiddle Block with Becket & Cleat, 882lb. SWL, 12.4oz. from LEWMAR
For chafe-free, low-friction tackles. Sheave: Anodized aluminum alloy . Ball Bearings: Delrin® . Sheave Size: 2-3/8" (60mm) & 1-5/8" (40mm) . Line Dia. : 3/8" max. . Cheek Material/Finish: Anodized aluminum alloy . Shackle/Strap Type: Swivel with three-way locking, drilled-out head . Cleat: Model with cleat: adjustable arm, aluminum cam cleat .

Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.

Strainer for Round Rule Pump, 2800 - 3700 gph Flow Rate from RULE INDUSTRIES
Original replacement strainer base for your Rule Bilge Pump.

Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.

Flush Lock - Black/Stainless Steel with Adjustable Offset Cam Bar from PERKO
Black plastic with stainless steel "D" ring handle and with adjustable offset cam bar. Two O-rings for increased water resistance. Position indicator shows open or closed position. Door thickness: 3/8" to 1-14" . Face plate dimensions: 2-7/8" x 2-7/8" . Adjustment latch bar: 3/8" to 3" .

Offset Threaded Shaft Cam Bar from PERKO
Spare offset threaded shaft cam bar for your surface mount lock & latch set.

Hatch - Ocean 60 Flat Base from LEWMAR
Well-engineered hatches with CE-certified quality materials and construction. Smoothly styled external hinge enables one-hand operation. Inside handles feature locks that cannot be forced from the outside. Flat base or 1'' flange base (pictured). 3-year warranty. Flat base cutout sizes: Ocean 10 - 10" x 10". Ocean 20 - 7-3/4"W x 13-1/2"L. Ocean 30 - 12-5/8"W x 17-3/4"L. Ocean 40 - 16-3/8" x 16-3/8". Ocean 44 - 17-3/16" x 17-3/16".