Replacement Cap with Gauge from MOELLER
Externally threaded cap fits Moeller tanks 031103, 031106, 031109, 031112, 031212. Scepter cap fits 4158, 4921, 3780 & 3781 tanks. Internal threaded cap fits 31612, 31615, 31515, 31818, 31620 & 31526 tanks.

Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.

Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.

WM Logo Baseball Cap - Olive from WEST MARINE
.

Capstan 1000 Rope Winch from POWERWINCH
Versatile system uses an easy to operate foot switch to retrieve anchors or fishing pots or provide power assistance on limited crew sailboats. Solid, 1-piece, machined capstan features aluminum housing with stainless steel internal shafts and hardware. Deck mounted design saves space for rope locker. Mounting template included. Pulling Power: 1000lbs. Speed Up: 40'/min. Boat size: to 55' . Rope Type: 3-strand nylon. Draw: 27A @12v. Measure 6 5/16"H x 8"W x 10 9/16"L.

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Vented Loop Cap, Marelon from FORESPAR
Loop Cap Replacement for marelon vented loops.

TankWatch® 4 Water/Holding Tank Monitor from SEALAND
Reliable micro float switches activate empty, low, mid and full tank levels on the indicator panel. No electrical components contact water or waste. Easy to install using universal flange (sold separately). Includes cap with micro float switches . Indicator panel . Gasket and stainless mounting hardware . Adapts to fit any water or holding tank up to 22" . 45" adjustable probes available by Special Order .

Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Storage Locker with Hinged Door from SAIL SYSTEMS
Increase your available storage area and save space at the same time. This recessed storage locker uses a continuous stainless steel hinge on the access door for long-lasting strength. Made of weather-able, acrylic capped ABS plastic for superior gloss, color retention and UV protection. Measures 11 3/4"H x 19 3/4"W x 7 1/4"D.

Tubing-Alu 7/8X20' from WEST MARINE
Bright 304 polished stainless steel or bright anodized aluminum. Used for a multitude of applications including grab rails, bow rails, and canvas top frames. Match materials between components to minimize corrosion. Stainless has . 049" wall thickness . Aluminum has . 058" wall thickness . Use 7/8" tubing for smaller powerboats . Use 1" tubing for sailboats and larger powerboats . Available in 6', 12' and 20' lengths .

20" x 20" Shade/Screen, Fits Lewmar Hatches, White from SKYSHADE
New screen and shade solution provides the ultimate in heat and light reflection with bug free ventilation for onboard comfort. Combines a retractable hatch shade and flyscreen system in a low-profile styled cassette. Made in extruded polymer and comes with integral hatch liner option, matching hatch corner radii and in three sizes available with round hatch adapter. Installation is simple to fit with four one piece corner mounted screws with integral screw caps . Available in white or beige.

G. O'Day 222/Santana 525,Length 47", Height at tip 2 1/4", Width at butt 1 1/2", Width at tip 2" from WEST MARINE
Replace that old ugly tiller with a new hand-made laminated ash and mahogany wood tiller, made to fit your rudder hardware, and pre-finished with multiple coats of premium marine spar varnish. Choose the right length and profile, and the butt-end measurements to fit your rudderhead hardware. Can’t find a good fit? Idasailor Marine can custom-build a tiller to your measurements . Custom tillers are shipped direct within 10 days . Click HERE to open the PDF custom order form.

Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.