Top Sellers
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
|
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
|
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
|
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
|
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
|
Anchor, Folding Grapnel 3 LB. from SEAFIT
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
|
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
|
Dock Buddy Dock Line, 4ft., Black from GREENFIELD PRODUCTS
The dock line that stretches Hook one end of the Dock Buddy to your boat cleat . Stretch the other end to dock cleat .
|
Box Anchor, Small, Offshore Boat to 18'–30', Cabin Cruiser to 24', 19lb., 22"H x 8.5"L x 5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
|
Dock Line Holding Tool from SHURHOLD PRODUCTS
Use it to easily loop your dock lines around posts or pilings. Especially useful at low tide when the piling is too high to reach. Mounts to any boat pole.
|
Stretch 'N' Slide Dock Line from GREENFIELD PRODUCTS
The easiest docking you've ever done! The 4' Stretch 'N Slide dock line stretches to 8' long and has 7 individual loops, so you'll always have the perfect length for easy tie up. Secures your boat to the dock in seconds.
|
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
|
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
|
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
|
|
Cart Anchoring and Docking, Anchoring and Docking Dock Carts
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Kart-Ahoy Dock Carts
Compact, lightweight, affordable cart features 12" plastic wheels that roll smoothly over bumpy docks. Extra cargo baskets can be stacked on top for added capacity. For storage, the plastic basket folds flat and the powdercoat steel handle detaches. Material: Plastic/steel . Maximum Load Capacity: 100lb. . Cargo Area: 2. 71cu ft. . Wheel Type/Size: Plastic, 12" . Dimensions: 23.
Part No: 11200
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Dock Pro™ Dock Carts
Transport your gear from the car to the boat the easy way with this large capacity cart. Features a seven cubic foot heavy-duty, roto molded polyethylene tub that will not rust or rot. 20" plastic-rim wheels with roller bearings that will stand up well to the marine environment. Zinc-coated corrosion resistant hardware used throughout. 300 pound capacity. Material: roto-molded polyethylene tub. Zinc coated corrosion resistant hardware. Maximum Load Capacity: 300lbs. ft. .
Part No: 1070
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Marine Utility Carts
Its solidly built from corrosion-resistant, aircraft-grade aluminum and holds 330lb. of gear. Large wheels roll easily over any terrain. Also great around the house and garden! The huge 20" dia. pneumatic tires mean stable, effortless maneuverability over ramps, docks, gravel, and uneven terrain, even with up to 330 lbs. Easy-folding, removable legs and retractable handle make for convenient storage in your car, onboard, or on the bulkhead of your boat, house, or garage .
Part No: 2100
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Marine Utility Carts
Its solidly built from corrosion-resistant, aircraft-grade aluminum and holds 330lb. of gear. Large wheels roll easily over any terrain. Also great around the house and garden! The huge 20" dia. pneumatic tires mean stable, effortless maneuverability over ramps, docks, gravel, and uneven terrain, even with up to 330 lbs. Easy-folding, removable legs and retractable handle make for convenient storage in your car, onboard, or on the bulkhead of your boat, house, or garage .
Part No: 2200
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Dock Pro™ Dock Carts
Transport your gear from the car to the boat the easy way with this large capacity cart. Features a seven cubic foot heavy-duty, roto molded polyethylene tub that will not rust or rot. 20" plastic-rim wheels with roller bearings that will stand up well to the marine environment. Zinc-coated corrosion resistant hardware used throughout. 300 pound capacity. Material: roto-molded polyethylene tub. Zinc coated corrosion resistant hardware. Maximum Load Capacity: 300lbs. ft. .
Part No: 1060
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts
Lightweight, folding cart folds flat to 2. 5/16" for compact storage and converts to working position with the push of a button. Tough with a hauling capacity of 175lb. and 7" non-marking, shock-absorbing tires. Aluminum telescoping frame Weighs 8.
Part No: H-003BV
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts
Push your gear to the water's edge with this practical off-road cartHandy cart features a roomy and comfortable bucket seat/hopper with double-walled nylon construction. Built for days at the beach and all around function with a rust-proof aluminum frame and all terrain tires that won't bog down in the sand.
Part No: WAGROLB
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking -> Dock Carts->Kart-Ahoy Dock Carts
Identical dimensions to the Lightweight Dock Cart (Model 412403), but with larger diameter wheels for added mobility and greater loadbearing capacity. Handles 185lb. of payload and boasts 15" wheels. The handle and cargo baskets are interchangeable between the two models. Recommended for freshwater use only. Material: Plastic/steel . Maximum Load Capacity: 185lb. . Cargo Area: 2. 71cu. ft.
Part No: 11210
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking
Great for use as a small tool crate, catch all or even for carrying groceries Its small size allows it to stow easily in a fore peak, quarter berth or car trunk Constructed of rustproof, lightweight plastic with a collapsible aluminum handle.
Part No: LARGE
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Cart Replacement Parts
Replacement parts for Kart Ahoy dock carts Model 412403 & Model 1968023.
Part No: 12050
|
|
|
|
Home -> Anchor & Docking -> Fenders & Docking->Dock Cart Replacement Parts
Replacement parts for Kart Ahoy dock carts Model 412403 & Model 1968023.
Part No: 15185
|
|
|