Welcome! Please Sign-In
Top Sellers
Stow Master Horn from STOWMASTER INC
Stow Master Horn from STOWMASTER INC
Blow the man down with our unbelievably loud hornThis tiny 3"L x 2"dia. horn uses your breath to produce a loud blast. It's easy to grab in a hurry when you need to get someone's attention and it comes with a lanyard, so you can place it around your neck.
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Replacement Ball Bearings for 150 Cam Cleat from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.
Electronic Horn, Black from AQUA-SIGNAL
Electronic Horn, Black from AQUA-SIGNAL
This under-deck hidden horn is designed for vessels under 12 meters, draws less than 1/2 amp and is easily installed in a standard 2 1/4" cutout. Each unit is completely sealed and comes with a waterproof gasket. All openings are sealed to let sound out but prevent water from coming in. Loudness dB: 106-108dB. Design Standards: USCG, CE. Dimensions: 4. 92"L x 3. 11"W x 3. 43"D. Draw: Less than 0. 5A at 12V.
Cleat, European Jam from WEST MARINE
Cleat, European Jam from WEST MARINE
Strong nylon jam cleat commonly found on most European boats.
Trapeze & Vang Cleat from CLAMCLEAT
Trapeze & Vang Cleat from CLAMCLEAT
The cleat has an in-built pulley that offers a compact solution for rigging with a 1:1 or 2:1 advantage, where a quick, positive lock that is easy to release is required. The sailor's preferred choice for adjusting trapeze lines.
Stainless-Steel Compact Electric Horn - Double from AFI
Stainless-Steel Compact Electric Horn - Double from AFI
Mini Twin Electric Horn Excellent for use in the marine environment. totally seal sound units have type 304 stainless cover, diaphragm and mounting brackets. Material: 304 stainless cover & horn diaphragm. Loudness dB: 106 dB. Approvals: ABYC for boats up to 20 meters. Dimensions: 3"L x 8"W x 1 3/4"H. Power Requirements: 12V. Draw: 3A @ 12V (max. 6A). Fundamental frequency: 490±20/440±20.
Drop-In Hidden Horn from AFI
Drop-In Hidden Horn from AFI
Designed for easy installation, this hidden horn mounts from the outside. Compact in size, but capable of 107db loudness. Comes with both black and white snap-on ASA plastic grilles. A weatherproof fabric liner lets sound through, but keeps water out. Prewired for 12V installation. Material: ABS plastic . Loudness dB: 107dB . Design Standards: Meets ABYC specs for boats up to 12 meters . Dimensions: 2"H x 3-3/8"W x 3-1/4"D . Power Requirements: 12 Volts .
Drop-In Hidden Horn Grill - White from MARINCO
Drop-In Hidden Horn Grill - White from MARINCO
Product Features: For use with Drop-In Hidden Horn - Marinco #11095 (and #11079).
Flat Cam Riser, 1"H from HARKEN
Flat Cam Riser, 1"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.
Push-Button Portable Signal Horn from WEST MARINE
Push-Button Portable Signal Horn from WEST MARINE
Blasts a powerful tone for emergency signaling in fog or rescue situations Compact horn blasts a powerful tone for emergency signaling in fog or rescue situations—or anywhere you need signaling power. Simply push the button for an incredibly loud blast. 100% ozone safe. Removable trumpet is unbreakable. 8oz. Type: Portable, push-button . Maximum Decibels: 126dB . Overall Size: 8" tall . Refill Size: 8 oz. .
Sports Horn from FALCON SAFETY PRODUC
Sports Horn from FALCON SAFETY PRODUC
Great for emergency signaling in fog or rescue situations! Ideal for coaches, sports officials, camp counselors, lifeguards and referees, while also meeting the needs of sports enthusiasts. 100% ozone safe, flammable isobutane propellant. Rugged, high impact plastic trumpet-guaranteed unbreakable. Removable trumpet for easy transport and storage. Refills readily available. Made in USA. Maximum Decibels: 130 dB . Size: 11" tall. Refill Size: 5. 5oz. .
Falcon Sports Horn Refill from FALCON SAFETY PRODUC
Falcon Sports Horn Refill from FALCON SAFETY PRODUC
Great for emergency signaling in fog or rescue situations! Ideal for coaches, sports officials, camp counselors, lifeguards and referees, while also meeting the needs of sports enthusiasts. 100% ozone safe, flammable isobutane propellant. Rugged, high impact plastic trumpet-guaranteed unbreakable. Removable trumpet for easy transport and storage. Refills readily available. Made in USA. Maximum Decibels: 130 dB . Size: 11" tall. Refill Size: 5. 5oz. .
Rechargeable Signal Air Horn from TAYLOR
Rechargeable Signal Air Horn from TAYLOR
Environmentally safe air horn uses air as a propellant, instead of the traditional gas-filled designs. It's economical too. no more expensive refills to buy. Recharges in seconds with a gas station air pump, air compressor, or any other mechanical compressed air source including hand pumps. Works in all weather extremes and can safely be used or stored near sources of heat. Provides approximately 20 blasts per charge. This loud horn puts out a powerful 120db. Meets all USCG regulations.

Cleat Horn Cleats

6" Jam Cleat Open-Base Cleat, 1/2" Max. Line Dia., two 1/4" FHMS, 1"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-80
Open-Based Cleats - Bronze 6" from WEST MARINE Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Bronze and Chromed Zinc Cleats
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
Part No: 230212
Open-Based Cleats - Bronze 5" from WEST MARINE Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Bronze and Chromed Zinc Cleats
We recommend stainless or bronze cleats for use in fresh or salt water. Zinc and Zamak cleats should be used in fresh water only. We stock a complete selection of cleats for anchoring, docking and general-purpose use.
Part No: 230112
Two 2" Length Cleats, Require Three #6 Fasteners from PERKO Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Chrome-Plated Zinc Teardrop Cleats
We stock a complete selection of cleats for anchoring, docking and general-purpose use. Zinc cleats should be used in fresh water only. Fasteners not included.
Part No: 0566DP2CHR
4" Standard Open-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 3/4"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-94
8" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 5/16" FHMS, 1-5/16"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-98
6" Standard Open-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 1-1/8"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-96
5" Jam Cleat Open-Base Cleat, 3/8" Max. Line Dia., two #12 FHMS, 13/16"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-79
6" Four-Hole Open-Base Cleat, 7/16" Max. Line Dia., four 1/4" FHMS, 1-1/4"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-06
8" Four-Hole Open-Base Cleat, 3/4" Max. Line Dia., four 5/16" FHMS, 1-1/2"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-08
6" Standard Closed-Base Cleat, 5/8" Max. Line Dia., two 1/4" FHMS, 3/4"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-16
4" Standard Closed-Base Cleat, 3/8" Max. Line Dia., two #10 FHMS, 1/2"H from SCHAEFER Home -> Sailboat -> Cleats & Stoppers -> Horn Cleats->Aluminum Cleats
These tough cleats are hardcote-anodized to provide strength and corrosion resistance for years of reliable service. Lightweight, strong aluminum offers an advantage over easily “burned out” plastic designs.
Part No: 70-14
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11