Add-A-Cleat from JOHNSON, C.S.
4-1/2" nylon-coated anodized aluminum cleat mounts easily on 7/8" or 1" rails.

6" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

Midrail Cleat, Fits 1" x 1/8" Track, 1/4" Pin Dia., 1/2" Max. Line Size, 2500 SWL from SCHAEFER
Reduce deck clutter, tie spring lines, fenders, dinghies, etc. onto this moveable, low-profile, heavy-duty cleat. The spring-loaded cleat fits on 1" and 1-1/4" T-track, so you can make quick and easy position changes without tools. Made of corrosion-resistant, polished, investment cast 316 stainless, this strong, adjustable cleat can also be used as a chock. To install, simply remove track end stop, slide on the cleat and lock into desired position.

Yellow Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

4-3/8" Folding Cleat, Recessed-Screw Installation from TACO PRODUCTS
316 stainless-steel folding cleats with recessed screws do not require a cutout.

Offshore Cam-Matic Cleat, 1-1/4"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth, positive operation when holding and releasing control lines. Light springs allow the cleats to open freely, so the teeth do not have to be sharp and your line lasts longer. Use models with aluminum jaws for high loads or when the line will be drawn through the teeth for adjustment. Models #423 and #365 have carbon fiber jaws for lightweight durability. Cam #150 and #365 require two #10 FHMS. Cam #280 requires two 1/4" FHMS. Each ShWt 0.

Gray Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

Medium Fairlead V-Cleat, 5/32"–5/16" Rope Dia., 660lb. SWL from RONSTAN
Inline static cleats are tremendously strong and abrasion-resistant. Teflon®-impregnated carbon fiber composite lasts far longer than traditional plastic cleats. Low-profile, snag-free cleats match existing Clam Cleat hole patterns.

6" Polished Aluminum Flip-Up Dock Cleat, Requires Two 3/8" Carriage Bolts from DOCK EDGE
Cleats without clutter! Smoothly rounded, solid aluminum cleats that fold down when not in use. We offer them with a white polyester powder coating or sand blasted matte finish. Square holes accept 3/8" carriage bolts. Mounting hardware sold separately.

Small Fairlead/Cleat, 1/8"–5/16" Max. Line Size, 265lb. SWL from RONSTAN
Low-profile bull's-eye, swivel base, and cleat in one. Aluminum arm swivels through 360°, and supports a high performance T-Cleat with Fast Track fairlead. Bull's eye has stainless liner for long life.

Blue Medium C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

Blue Small C-Cleat from RONSTAN
Reversible jaws effectively double the life of the cleat and are kind to expensive line, yet grip tenaciously. Beveled cam tops and low spring effort require minimum force when inserting line. Self-lubricating, self-cleaning slotted bearings are impregnated with Teflon®, provide lower frictional resistance and quicker response than ball bearings, which deform under load. Rope Guides: This fairlead, mounted on the load side of the cleat, assures correct alignment of control lines in the cleat.

Trimline Cleat - 6" from SUNCOR
Trimline Cleat 316 Stainless Steel - Precision Cast. 4" Overall length. Base hole to hole: 1. 33" x 0. 8". Requires four 1/8 fasteners, not included.

Carbo-Cam® Cleat, 1-3/32"H from HARKEN
Harken Cam-Matic cleats are legendary for smooth operation when holding and releasing control lines. Three rows of Delrin ball bearings allow the jaws to open and close smoothly under the highest loads. Light springs allow the cleats to open freely, so the teeth do not have to be sharp which means that your line lasts longer. Use models with aluminum jaws for high loads, or when the line will be drawn through the teeth for adjustment.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.