Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Snap Furl CF-700 Furling System from SCHAEFER
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.

Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).

1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.

A. Centerpin BNC/RG58AU Coax Connector from SHAKESPEARE ELECTRON
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.

Furling Lead Block from RONSTAN
A sleek, snag-free way to lead your furler's lines back to the cockpit. Clamps around the 7/8" or 1" stanchion tubing, so you don't have to drill any holes.

WL/1 Fairlead Model from SPINLOCK
New low-profile design easily mounts to 1" stanchion using internal clamping system. WL/2 sheave model utilizes unique tracker ball angle adjustment. WL/1 Fairlead model includes stainless-steel bullseye for strength.

Shore Power Cord Storage & Connector Box from SAIL SYSTEMS
Connect and store 30 amp shore power and phone cords in this high-gloss acrylic capped ABS box. Molded supports hold coiled power cord and installed connector. Gasketed "Slimline" door with hidden fasteners for a flush look and weather resistance.

Fuel Tank Connector, Yamaha 1/4 NPT Male Brass from MOELLER
Yamaha 1/4 NPT Brass Male Tank Connector.

Fuel Connector, Suzuki, 5/16" barb from MOELLER
Suzuki 5/16" Barb Chrome Plated Brass Female Fuel Line Engine Connector.

Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.

Toggle Assembly with 5/8" Clevis Pin from HARKEN
9 mm) clevis pin (MKIV Unit 2 Furler).

Fuel Line Connector - 3/8" - Yamaha from SIERRA
Replaces: 22-13563A3, 22-13563Q3.

4 Position Sealed Ignition Switch from COLE HERSEE
Sealed keyed switches with integral Deutsch connectors feature fully sealed contact areas with O-rings and ultrasonic welding to IP67 waterproof rating. High-impact plastic for corrosion resistance and tested to SAE J259 for ignition switches. Contact rating: 10A@12V DC, 5A@24V DC. Panel thickness: 3/8".

Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.