8lb. Traditional Anchor, 16' to 24' Boat Length, 600lb. SWL, 24"L x 18-1/2"W, 12-1/4" Fluke Length from WEST MARINE
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .

22lb. Traditional Anchor, 28' to 40' Boat Length, 1,500lb. SWL, 35-1/2"L x 27-1/4"W, 18-1/2" Fluke Length from WEST MARINE
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .

13lb. Traditional Anchor, 21' to 32' Boat Length, 900lb. SWL, 28-1/2"L x 22"W, 15" Fluke Length from WEST MARINE
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .

43lb. Traditional Anchor, 35' to 46' Boat Length, 2500lb. SWL, 35-3/4"L x 31-3/4"W, 21-3/4" Fluke Length from WEST MARINE
Strong, reliable, high-quality, affordable anchors with precise dimensions and hot dip galvanizing for corrosion protection. Patterned after the original lightweight Danforth anchors, including precision die-cut components for accurate assembly and symmetry, a tapered shank with chamfered edges for deeper seabed penetration and increased stock length and fluke angle for roll stability and dependability. Material: Galvanized steel . Application: Sand and mud . Great in sand and good in mud. .

Anchor Deck Chocks from PERKO
Polished, chrome-plated bronze chocks hold small, pivoting fluke anchors. Fit Danforth anchors to 16lb. and Fortress Anchors to 10lb. (FX-16). Four-piece set includes supports for shank, flukes and crown.

Danforth S600 Anchor - For boats up to 25', 9lb., 600lb. Safe Working Load from TIEDOWN ENGINEERING
Every angle on a Danforth® anchor contributes to its performance. A 32º shank angle is assured, because the shank comes to rest on special reinforcing yokes inside the angled crown plates. For boats up to 27'. Anchor weight 9 lbs. The inward sloping crown forces its thin, sharp flukes down into the bottom while I-beam fluke construction provides an extra margin of safety with its strength and durability. As the rode becomes taut, the beveled flukes penetrate deeper until firmly set.

Danforth Hi-Tensile Anchor - 35 lb for 35-45' Boats, 3,800 lb SWL from TIEDOWN ENGINEERING
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.

Danforth Hi-Tensile Anchor - 5 lb for 18-24' Boats, 1,000 lb SWL from TIEDOWN ENGINEERING
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.

14lb. Economy Anchor, 25' to 30 Boat Length, 740lb. SWL, 28-1/4"L x 21-1/2"W, 14-1/4" Fluke Length from TIEDOWN ENGINEERING
An economical "lunch hook" and spare anchor Strong steel pivoting fluke anchors are built to original Danforth dimensions and are ideal for holding in sand or mud in protected waters. Non-tapered shank, fully welded crown and L-shaped flukes. Hot dip galvanized. Style: Pivoting steel fluke . Material: Galvanized steel . Our most affordable fluke-style anchor. Cons: Lacks the strength of premium models. Not reliable for overnight holding or for use in grass, rocks or clay.

Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

55lb. (25kg) Anchor, 33'-52' (10-16m) Boat Length, 38.2"L x 19.1"W x 16.4"H from ROCNA ANCHORS
Independently tested as one of the best, Rocna anchors stand out for their holding power, setting ability and ease of use. They combine a chisel tip, roll-bar, and skids to dig in straight and bury rapidly, typically within one meter, even in thick weed and kelp. The Rocna’s folded fluke geometry resists wind and current shifts and doesn’t easily trip out upon load reversal. This means greater security for cruisers, and a lighter anchor for weight-sensitive craft. Style: Fixed-shank “scoop” .

Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Galvanized from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.

Stowaway Bag for 7lb. Anchor from FORTRESS ANCHORS
Rugged Cordura bags with Velcro fasteners are built to survive tough, regular use. Fit Fortress or Guardian anchors. Holds an anchor and 6' of chain (sold separately).

Box Anchor, XS, Offshore Boat to 18', 13lb., 18"H x 7"L x 4.5"W Collapsed, Galvanized from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.