Top Sellers
|
|
"Little" Crane, 175 lb. Capacity, 30" Arm Reach, 7:1 Purchase, 75' Line Length from ST. CROIX MARINE
Precision engineered and fabricated from stainless steel, these removable cranes lift heavy loads with ease. Best of all, it takes just 20 seconds to set up or remove for storage. Optional spare mounting kits (VPN #176 & 196) include a set of brackets and rail clamps for an extra mounting location. Material: Polished stainless steel. Height: 60" mast height. Mounting Style: Horizontal or vertical mounting to railing. Included Equipment: Complete kit with mounts and 5/16" line.
|
3-IN-1 Boat Hook from SHURHOLD PRODUCTS
Convert your Shurhold pole to a paddle or boathookUse thse accessories with Shurhold's "one-pole-does-it-all system. Boat Hook has line-carrying feature, centered push-off and basic boat hook. Paddle features Shur-Lok quick-release adapter and is a great safety item for any boat.
|
Inflatable Boat Ladder from GARELICK
Contoured to hug the hull of inflatable boats. Attaches to floorboard or side with 3/8'' line and heavy-duty swivel snap. 1'' dia. anodized aluminum tubing with plastic rungs. Vinyl sleeves protect hull fabric.
|
Inflatable Boat Antifouling Paint from PETTIT
Water-based, multi-season ablative antifouling paint. For hard- or soft-bottom inflatables. Cleans up with water. Black. Quart. Type: Copolymer Ablative. Recommended Usage: PVC or Hypalon; trailered boats. Biocide: CuOx 41%. Additives: No. Compatibility: With all other antifouling paints in good condition except VC-17. Number of Coats Recommended: Two.
|
303 Aerospace Protectant - Pint from 303 PRODUCTS
This is the maintenance product manufacturers recommend most. Only `303’ beautifies as intensely, protects as powerfully or lasts as long. Powerful UV screening protection for colored gel-coat fiberglass, inflatable boats, vinyl, clear vinyl (isinglass) windows, rubber, plastics & leather. Spray on/wipe dry. Treated surfaces repel dirt, soiling, staining, water spots, salt water and mildew.
|
Walker Bay 10, 9'8" Length, 4'9" Beam, 126lb., 449lb. Capacity (up to 3 people) from WALKER BAY BOATS
Bolt in the seats, break out the oars (or optional sail kit or motor) and you’re ready to cast off. Boats include exclusive Hydro-Curve Oars. Application: Rowing, motoring or sailing . Hull Material: High Impact Polypropylene . Construction: High-pressure injection molded . Hull Shape: Round bottom lapstrake-style . Standard Hardware: Oars, oar locks, seats, stainless bow eye, Wheel in the Keel™ . Available Accessories: Sail kits, RID kits, Bimini boat cover . Warranty: 10 years limited.
|
Coastal Comfort Inflatable Life Vest, Manual from WEST MARINE
Enjoy unrestricted movement on the water! Designed for inshore or coastal boating, our new Comfort Series Inflatable Vests have a more streamlined and lightweight fit. These compact vests feature a thin profile that won't inhibit your movement and they offer 22. Each vest has 1" chest webbing, a high-tenacity nylon covering and Delrin buckle. All vests have heat-welded yellow chambers that provide 22. Include D-ring, back-up oral inflation tube, one arming cylinder and pin.
|
Inflatable Life Vest, Orange from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
|
Inflatable Life Vest, Black from Ultra 4000 Manual/Automatic Inflatable Life Vest
USCG-Approved Type V for use when worn on uninspected commercial vessels less than 40 ft. Approved substitute for a Type II or III PFD only when worn and used in accordance with the owner's manual. High-visibility reflective tape and emergency whistle on bladder . Halkey-Roberts 1F automatic inflator with single point indicator . Automatic inflation when submerged in water; manual inflation by pulling lanyard or by oral tube . Provides 33. Pocket to store extra cylinder or gear and D-ring .
|
Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.
|
Boat Hook Tip from WEST MARINE
Designed to fit the handles of our Admiral- and Captain-Series Deck Brushes. All have positive-locking, pushbutton, quick-connector sockets that prevent accessories from rotating when in use.
|
Fiberglass Boat Cleaner 920 1/2 Gallon from COLLINITE
Removes rust, exhaust, oil, grease, and oxidation stains from fiberglass. Restores the original color quickly without hard rubbing or buffing, leaves a chemically clean surface to which waxes can bond. Use with fiberglass boat wax or heavy-duty paste Fleetwax . Made in U. S. A.
|
Hydrostatic Inflatable Life Vest without Harness from WEST MARINE
The Hammar 1F auto inflator is maintenance-free for five years and automatically inflates only when submerged in 4" of water. Designed for comfort with a low profile for maximum mobility. Soft neoprene Comfort Collar wont chafe your neck. Patented SecureZip closure system breaks open easily when inflated, is easy to repack and stays closed during rigorous activities. Inflation cylinder is inside the bladder to protect against corrosion. Buoyancy: 35lb.
|
|
|
|
Davit A Inflatable Boat Accessories, Inflatable Boat Accessories Davit B, ST. CROIX Inflatable Boat Accessories
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 931
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 927
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 929
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 928
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 930
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats -> Inflatable Boat Accessories->Stand-Off Bars for TipUp Glueless Davit System
Stand-Off Bars for TipUp Glueless Davit System These stand-off bars, sold individually, give your TipUp Glueless Davit System a custom fit on your swim platform. Components are top-quality polished 304 and 316 stainless steel . Stand-off bars are available separately to enable the dinghy to be carried more vertically .
Part No: 926
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats
Removable Davit Accessories.
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Removable Davit Accessories
Removable Davit Accessories.
Part No: 223
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Removable Davit Accessories
Removable Davit Accessories.
Part No: 222
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Removable Davit Accessories
Removable Davit Accessories.
Part No: 219
|
|
|
|
Home -> Boats & Motors -> Inflatable Boats->Removable Davit Accessories
Removable Davit Accessories.
Part No: 242
|
|
|