Top Sellers
LED, 12V 30W from DR. LED
Medium screw-base (Edison E26/E27) LED bulbs offer an energy-saving solution to incandescent lighting. Soothing warm white light. Offer low power draw and ultra-long service life: 50,000 hours. Impact and shock resistant. 8-18V DC. . U. S. made high flux LED. *Click here for the Dr.
|
mi6 Tactical LED Flashlight from DR. LED
State-of-the-art three watt US made high-flux LEDs provide the most lumen per watt in LED technology. Construction is beautifully machined aluminum with a tough gray anodized surface. We guarantee that you will love this flashlight as much as you love your favorite Leatherman tool, or Myerchin rigging knife, or Makita driver-drill. We do recommend that you carry an extra set of batteries, however, since you'll be tempted to show it off so often that you'll need a refill set before you know it.
|
Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.
|
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
|
Horizontal Chrome/Brass Masthead Light, Boat Size to 12m (39'4"), 2-3/8"H x 7/8"W from PERKO
For powerboats and sailboats. Chrome-plated brass or chrome-plated zinc. Mounting Hardware: #4 FHMS Volts: 12V Draw: 0.
|
Vertical Sidelights, White from PERKO
For powerboats and sailboats less than 20m or 65. 6'. Plastic frames with ultrasonically welded lenses and gasketed plastic bases. 2nm visibility. Per pair, except bi-color. Case Material: Plastic . Case Dimensions: 3-1/2"L x 2-1/4"W x 13/16"H . Mounting Hardware: #8 FHMS (sold separately) . Volts: 12V . Draw: 0. 7A .
|
|
|
|
|
|
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
XA/XAS, Replacement Cam Kit from SPINLOCK
Cam Replacement & Upgrade Kits for XTS Powerclutches.
|
|
|
Stern Three-Mile LED Light from ATTWOOD
Energy-efficient three-mile 12" pole anchor/masthead and transom lights. Solid stainless hardware for corrosion resistance and unsurpassed polished appearance. Pole light is direct replacement for Perko 1181DPO CHR used on most Sea Ray boats. Case Material: Stainless steel . Mounting Hardware: Not included . Pole Diameter: 3/4" . Pole Material: Anodized aluminum . Draw: 0. 15A (1. 8W@12V DC) . Volts: 12V DC.
|
Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.
|
Bottom Support Pole Caps, Non-skid from DR. SHRINK
Bottom Support Pole Caps Dr. Shrink carries a full line of premium installation supplies to ensure a professional shrinkwrap job from start to finish.
|
|
DR. LED Replacement Bulbs
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001542
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001054
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001047
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001078
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001085
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001092
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001436
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting -> Navigation Light Acc.->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001450
|
|
|
|
Home -> Electrical -> Exterior & Navigation Lighting->Polar Star 40 LED Replacement Bulbs
2nm navigation light LED replacement bulbs. Specially designed as direct replacements for most of the incandescent navigation lights available including Aqua Signal (series 40, 41, 42, 50, 55), Attwood, Hella, Perko and more. Consumes only 1W. A great way to reduce energy consumption aboard. Satisfy all USCG requirements for brightness, 2nm distance and arc for vessels less than 50m (165') in length. Application: Replacement bulbs for most 2nm navigation lights . Amps: 0. 1A . Watts: 1W .
Part No: 8001061
|
|
|
|
Aqua Signal series 25 navigation lights LED replacement bulbs. 2nm brightness. Base Type: Gold plated dimpled festoon. *Click here for the Dr.
Part No: 8001122
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001245
|
|
|
|
Because they produce only a small amount of heat, these highflux bulbs make ideal replacements for most “third degree burn” halogen reading, map and cockpit lights with bi-pin and bayonetstyle bases. Light is soothing and warm with cutting edge internal circuitry and high-quality U. Power consumption is just 1W (less than 0. 08A!) except for three-watt Model 9980111. For forward pointing reading fixtures only. Application: Works with most MR11 fixtures . Amps: 0. 08A (Model 9980111 draws 0.
Part No: 8001238
|
|
|