Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.

Halyard Kit, 1/8" Wire Dia., 3/8" Line Dia., 40' Wire Length, 40' Line Length from WEST MARINE RIGGING
Convenient, do-it-yourself kits offer an economical way to replace old halyards We offer these kits for those who want to replace their old halyards or install new low-stretch halyards. Made of the highest quality 7x19 oil-free stainless wire and New England Ropes premium white Sta-Set yacht braid. Comes with a Flemish eye at the rope end, and a thimble and sleeve, but no shackle. Rope Type: Sta-Set Yacht Braid . Shackle: Flemish eye splice, sleeve and thimble, no shackle .

Wiretec 405 Sparkplug Wire Set from WIRE TEC (MAGSTAR)
WIRETEC 405 SPARKPLUG WIRE.

RigTune Pro Digital Rig Tension Gauge from HARKEN
Old-fashioned spring gauges, like the Loos Pro, don’t provide repeatable numbers. This product does. Unlike spring-loaded gauges, the Harken Rigtune Pro measures rig tension to the nearest kilogram. A load cell records the pressure on one of the pins and the measurement is displayed on a simple, easy-to-read screen. The Rigtune Pro fits a specific range of rigging sizes, 2. As rigging is deflected over three pins on the back of the gauge, a load cell records the pressure on one of the pins.

Twisted Pair Wire with Shield from ANCOR MARINE
Similar to Ancor duplex wire, except that the conductors are twisted and surrounded by a copper shield for extra protection against noise and electrical interference. Red/black conductors. Recommended by ABYC for DC wiring near compasses and other magnetically - sensitive devices. Sold per foot. Wire Type: Twisted Pair . Construction: Tinned Copper . Conductors (Color and # of): 1 Red, 1 Black . Color of Exterior Insulation: White . Shielding: Copper Shield . Approvals: UL, ABYC, CSA .

1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .

Stainless-Steel Rigging Knife, Straight Edge from WEST MARINE
Tackle onboard cutting tasks with ease An essential onboard tool, our Rigging Knife is constructed of corrosion-resistant stainless steel with a Delrin® handle. It’s molded to fit your hand and features a quick-cut serrated blade and safety blade lock. Blade: Sheepsfoot . Blade Length: 3" . Bolster Material: Delrin® . Edge Type: Varies . Marlinspike: No . Shackle Opener: No . Locking Blade: Yes . Overall Length: Open: 7", Closed: 4" .

Series 250 Exhaust Hose, 2-3/8"ID, 2-3/4"OD, 230psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

Bluefever Wire Max Glove, L from AFTCO
Bluefever Wire Max Glove L|Bluefever Wire Max Glove L.

Series 250 Exhaust Hose, 7/8"ID, 1-3/16"OD, 565psi Burst Pressure from SHIELDS RUBBER
For use in all marine water and wet-exhaust applications. Also for marine wet-exhaust where connection requires great length (greater than 4 x ID) or significant bend. Meets or exceeds standards for certified wet-exhaust hose. Sold by the foot with a maximum continuous length of 10' except where preceded by an asterisk, which indicates a maximum continuous length of 50'. Construction: Black synthetic rubber with wire helix and HD synthetic cord . Temperature Range: –20° to 200° F .

5/16" Wire Rope Clamp from SEADOG
Investment Cast 316 Stainless Body / AISI 304 Stainless U-Bolt. Accepts 5/16" wire. 1-5/8" Long. 1-3/8" wide.

Light Knives Illuminated Rigging Knife from MYERCHIN INC.
carry a Light Knife! It's dark, your hands are full and there's no way to hold a flashlight. The light is bright enough to let you read a chart 30 inches away, but because it's red it interferes less with your natural night vision. Stainless steel blade edge is 30% straight, 70% serrated for cutting nylon/polypro or tougher high-tech synthetic lines. Grip is ultralight Zytel® nylon. Secures to your belt or lifejacket with included clip. Serrated edge makes quick work of the toughest lines .

Light for Windex 10, 15 & Sport Wind Indicators from DAVIS INSTRUMENTS
This masthead light illuminates Windex® wind indicators for perfect night sailing Illuminates reflective reference tabs on underside of the Windex 10 and 15. Mounts directly to the masthead fitting. Draws only 120mA . Mast wire not included . Made of non-corrosive materials . Replacement bulb for Model 4481503.

Furler Kit for Boat Length to 16', 500lb. SWL, 1/8" Max. Wire dia., 1/4" Pin dia., 2-1/2" Pin-to-Pin, 5/32" Furling Line dia. from HARKEN
Furl or set your jib from your cockpit Harken small boat furlers allow the sail to be set and furled from the cockpit, a critical convenience in many racing dinghies and trailerable sailboats. Constructed of Hardkote anodized Teflon-impregnated aluminum, they feature multiple stacked races of Delrin or Torlon ball bearings for smooth rotation under load. The jib’s luff wire must be properly seized to the sail, since it carries most of the headstay load. 434 furler for dinghies under 16ft. (4.

Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.