Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .

Medium Edging, White, 25' Coil, 3-1/2"H x 1-1/2"W from TAYLOR
Prevent scuffing when you dock Vinyl dock guard is specially formulated for softness and durability to protect your boat or dinghy. Each piece installs easily with screws or nails to the edge of docks, piers and floats. Material: Extruded PVC . Attachment Method: Stainless steel dock nails . Shock Absorption Mechanism: Flexible PVC .

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

6" Polished Aluminum Flip Up Dock Cleat from DOCK EDGE INC
These sleek, low-profile cleats fold down and out of the way when not in use. The smooth rounded surfaces are made of solid aluminum with a white polyester power coating. Predrilled for mounting with 3/8" carriage bolts (hardware sold seperately). .

Stainless-Steel Rigging Knife, Straight Edge from WEST MARINE
Tackle onboard cutting tasks with ease An essential onboard tool, our Rigging Knife is constructed of corrosion-resistant stainless steel with a Delrin® handle. It’s molded to fit your hand and features a quick-cut serrated blade and safety blade lock. Blade: Sheepsfoot . Blade Length: 3" . Bolster Material: Delrin® . Edge Type: Varies . Marlinspike: No . Shackle Opener: No . Locking Blade: Yes . Overall Length: Open: 7", Closed: 4" .

12V Blaster Washdown Pump, 3.5 GPM from SHURFLO
Blast the grimiest decks clean with one of these durable freshwater/saltwater pumps. Positive-displacement three/four chamber diaphragm design is self-priming up to 6' and can run dry without damage. Include 3/4" and 5/8" garden hose adapters. Pro Blaster features higher capacity and a seamless motor shell for enhanced protection in saltwater environments. Suitable for mounting in wet locations. Include fittings and Blaster spray nozzle. Switch Type: Sealed 45psi pressure switch .

Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

Rocker Pump Faucet - Black from FYNSPRAY
Standard equipment on thousands of boats, this practical, rocker-action pump can be used with salt or freshwater. Ultra-simple design disassembles quickly. Plastic body, chrome-plated handle and spout. Material: Brass Capacity: 58 strokes per gallon. Dimensions: 6" above Clearance: 4 3/4" clearance below counter.

Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .

4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.