Top Sellers
3/4" Bronze Intake Strainer, 2-1/8" Max. Hull Thickness, 3" x 4" Strainer Size from CONBRACO
Discourages air locks in your water-intake lines at high speeds. Keeps water flowing at low speeds and debris out at any speed. Includes integral thru-hull fitting. Marine UL-listed.
|
1" Bronze Intake Strainer, 2-1/2" Max. Hull Thickness, 3" x 4" Strainer Size from CONBRACO
Discourages air locks in your water-intake lines at high speeds. Keeps water flowing at low speeds and debris out at any speed. Includes integral thru-hull fitting. Marine UL-listed.
|
Deck Tap, 3" x 2" x 5" from SHURFLO
All Trinidad Series fixtures are made of marine grade chrome-plated brass and include all necessary installation hardware. Material: Chrome-plated brass . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Folding Tap, 7"H x 3-1/2"W x 2"L from SHURFLO
All Trinidad Series fixtures are made of marine grade chrome-plated brass and include all necessary installation hardware. Material: Chrome-plated brass . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Basin Faucet, 4-3/8" x 6-1/2" x 6-1/2" from SHURFLO
All Trinidad Series fixtures are made of marine grade chrome-plated brass and include all necessary installation hardware. Material: Chrome-plated brass . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Galley Mixer Faucet, 11-1/2"H x 2"W x 8"L from SHURFLO
All Trinidad Series fixtures are made of marine grade chrome-plated brass and include all necessary installation hardware. Material: Chrome-plated brass . Port Sizes: 1/2" NPT . Clearance: 2-1/4" .
|
Lower Unit Quart Pump from WEST MARINE
Metal threaded fitting fits MerCruiser, OMC, Evinrude, Johnson, Honda (70-90hp), Volvo, Force and Gamefisher lower units Fits standard quart plastic bottles. Flexible hose gets to hard-to-reach fill plugs.
|
6,500 BTU/Hr. EnviroComfort, 5.4A/7.0A Draw @ 115V AC Cool/Heat, 12.25"H x 13.25"W x 17.75"D, 5" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
9,000 BTU/Hr. EnviroComfort, 6.0A/8.3A Draw @ 115V AC Cool/Heat, 13"H x 14.25"W x 18.25"D, 6" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
15,000 BTU/Hr. EnviroComfort, 9.4A/12.4A Draw @ 115V AC Cool/Heat, 14.25"H x 14.25"W x 19.88"D, 6" Duct Size from DOMETIC ENVIRONMENTAL
Keep cool in the summer and warm in the winter with one of these reverse-cycle air conditioners designed to operate with R-417A, an environmentally safe gas. Operation is made easy by the EnviroComfort digital control. Reverse Cycle: Yes . or Horiz. Included Equipment: Two-knob control, seawater pump, seawater hose, stainless hose clamps, strainer and speed scoop inlet, overboard discharge, ball valve, ducting, supply and return grilles, PVC plumbing fittings, electrical terminal connectors .
|
Water Inlet Fitting from PERKO
Chrome-plated bronze fittings with watertight plug and stainless chain. Outlet has a male garden hose fitting; inlet has a female swivel garden hose connector. 1/2" female NPT fitting in back. 2-3/4"dia.
|
|
|
|
|
|
|
1" Thru-Hull Fitting, 5-3/8" Max. Hull Thickness from CONBRACO
Bronze Mushroom Head Threaded Thru-Hull Fittings, Extra Long.
|
|
elbow metal plumbing fittings
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 001117-1515
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 001118-1515
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 001119-0815
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 001120-0815
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 002476-15
|
|
|
|
Home -> Plumbing -> Fittings & Valves->Quick Connect Plumbing Fittings
Making plumbing connections is easy with Quick Connect Fittings. All you need to make a connection is the requisite tubing, the desired fitting and a standard tube cutter. That sure beats a hose barb! Connections can be made with hot or cold potable freshwater or saltwater in boats and RVs with no screwing or clamping required. Connectors are best used with cross-linked polyethylene Flexpipe™ marine-grade tubing (offered below) that gives the same reliability as metal piping without corrosion.
Part No: 002417-10
|
|
