Welcome! Please Sign-In
Top Sellers
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.
Power Tune Engine Cleaner, 13 oz. from MERCURY MARINE
Power Tune Engine Cleaner, 13 oz. from MERCURY MARINE
Dissolve gum, varnish, deposits and clogs in the fuel system and combustion chambersScrub carburetors and injectors clean with this detergent cocktail of solvents and motor oil. Fast-acting chemical dissolves gum, varnish, deposits and clogs in the fuel system and combustion chambers. For 2- and 4-cycle engines. 13oz.
Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA
Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.
Delo 400 Motor Oil, 400 15W-40, 5 Gallons from CHEVRON
Delo 400 Motor Oil, 400 15W-40, 5 Gallons from CHEVRON
Premium quality, heavy-duty motor oil exceeds all OEM requirements and provides exceptional protection, even under severe conditions Largest selling heavy duty engine oil in the USA. Premium quality engine oil exceeds industry and factory performance specifications. Recommended for all 4-cycle diesel and 4-cycle gasoline engines operating under severe conditions. Formulated with the most advanced additive technology. Superior results with either low or normal sulfur diesel fuels.
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
DELO 100 Diesel Engine Oil - SAE 30 5 gallons from CHEVRON
Recommended for use in older 2 and 4 stroke marine diesel engines, Chevron DELO 100 motor oils utilize the latest technology to provide excellent performance in older engines using either normal, high, or low sulfur fuels. The SAE 30 and 40 grades are specifically designed for 2-stroke diesel engines requiring highly effective control of wear and deposits. DELO 100 oils comply with Detroit Diesel Corporation 2-stroke engine requirements, including the 0.
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
Air Filter for Detroit Diesel Engines 671 Natural/Turbo, 8V71 Natural, 12V71 2 Turbo, 6V92 2 Turbo, 8V92 1 Turbo/2 Turbo, 12V92 Natural, All HP, Tapered, 9" x 9" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
Motor Mate Lifting Davit from FORESPAR
Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
Air Filter for Caterpillar Engine 3116, Detroit Diesel Engines 6V92 1 Turbo, 12V92 2 Turbo, All HP, Tapered, 9" x 12" from WALKER ENGINEERING
These genuine replacement air filter elements are designed and manufactured to meet Walker's strict standards for high performance air flow, multi-ply construction, and product quality. Air filters are available in popular sizes to equip your Caterpillar®, Detroit Diesel®, or Cummins® marine engines. Please measure your filter carefully before ordering (shape and filter size should not be changed from original equipment as springs and tops will not fit properly).
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.
Genset AIRSEP® Air Filter from WALKER ENGINEERING
Genset AIRSEP® Air Filter from WALKER ENGINEERING
Keep your Genset AIRSEP system running in peak condition with this washable replacement air filter element. Rated for 250 hours between filter cleanings. Washable replacement air filter.
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Synthetic Blend 4-Cycle Engine Oil, Quart from QUICKSILVER
Recommended for gasoline and diesel-powered stern-drive and inboard engines that require FC-W Certified, SAE 25W-40 oil.

Engine Systems OSCO MOTORS CORP.

OSCO GASKET FOR 274147 from OSCO MOTORS CORP. Home -> Engine Systems -> Engine Parts
Fits Osco Motors # 8125 manifold .
Part No: 9015-G
Exhaust Manifold Mounting Kit from OSCO MOTORS CORP. Home -> Engine Systems -> Engine Parts
Includes Osco Motors # CV-GH gasket and mounting hardware.
Part No: CVCR-MK
Exhaust Manifold Elbow from OSCO MOTORS CORP. Home -> Engine Systems -> Engine Parts
Exhaust elbow with jacketed upper for swivel Fits GM small block V8 engines 305–350 CID.
Part No: 7386
OSCO CRUSADER ELBOW FOR LOWER SWIVEL from OSCO MOTORS CORP. Home -> Engine Systems -> Engine Parts
Exhaust Elbow Lower Swivel - 3" Outlet Replaces Crusader #97387 .
Part No: 7387
Elbow from OSCO MOTORS CORP. Home -> Engine Systems -> Fuel Tanks
Fits Chrysler 318-360 1966 and up. Fixed exhaust. 3" exhaust outlet. 90 degree down angle. Use with 480-MK or 480-MK-FW Mounting Kit. ELBOW Part No. 639.
Part No: 639
Elbow/Reservoir from OSCO MOTORS CORP. Home -> Engine Systems -> Engine Parts
Fits Mercruiser aluminum manifold # 93174 . Replaces Mercruiser # 98561 . Cap included . Use mounting kit # 8561-MK .
Part No: 8561
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12