Stainless-Steel “S” Hook, 3/16" Wire Dia., 5/8" Inside Width from SEAFIT
Stainless Steel "S" Hooks. Polished Stainless Steel Made in the U. S. A.

Stainless-Steel Rub Strake, 1"W x 24"L from TACO PRODUCTS
Polished stainless steel guards protect lines against chafe from cap rails, gunwales, etc. Material: Marine-grade stainless steel .

Cabinet Handle, Stainless Steel Bar 7" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.

Stainless-Steel Rub Rail, End, 1"H x 12"L; Requires #8 Screws from TACO PRODUCTS
Fits a wide variety of vinyl profiles Hollow back (marine grade type 304) has concave back to fit rigid vinyl rub rails and provide added protection and chrome-like accent around entire boat. Most widely used stainless-steel inserts fit the largest variety of vinyl profiles on the market. Solid back stainless-steel rub rail provides premium heavy-duty protection and a polished finish for your boat.

316 Stainless-Steel Hose Clamp, 7/16" to 11/16", SAE Size 3 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .

Stainless-Steel Full-Flow Ball Valve, 1/4" Size (NPT) from GROCO
Components include 316 stainless-steel body, 304 stainless-steel handle, PTFE seals and seats.

4.5" Stainless-Steel Pop-Up “Neat Cleat” from ATTWOOD
Retractable stainless steel cleats retract to only 1/2" above deck and have direct drainage to the bilge. Corrosion-free. Install easily. Hardware included. Functions: Drains to bilge with drainage receptacle. Requires 3/8" ID tube (not supplied) . Material: Stainless steel . Height: Lowered, 1/2"; Raised, 1-5/8" . Line Size: 1-1/4" line opening . Cutout Size: 7/8" hole saw size. Max.

316 Stainless-Steel Hose Clamp, 7/8" to 1-1/4", SAE Size 12 from ABA OF AMERICA
Hose clamps you can trust now and later Trust these clamps for secure hose connections. All components are Type 316 stainless steel for ultimate corrosion resistance. The smooth, unperforated band surface and rolled edges prevent hose damage. Band and screw threads are properly pitched, rendering the clamp virtually immune to vibration-caused back-off. Hoses are measured by inside diameter, so use a clamp with a maximum opening at least a 1/4" larger .

Cabinet Handle, Stainless Steel Bar 13" from WEST MARINE
Brushed, 304 grade stainless steel pull handles feature smooth rounded ends, hidden fasteners and a stylish contemporary Euro design. Wide range of sizes available from 6 1/4" to 25" for cabinets and drawers of all sizes.

304 Stainless-Steel Hose Clamp, 3-1/8" to 4", SAE Size 56 from NORMA
With 9mm-wide (3/8") non-perforated bands, and made of stainless steel, these clamps feature rolled-up edges to prevent hose damage. We recommend two clamps per hose end below the waterline. Hoses are measured by inside diameter, so select a clamp with a maximum opening at least 1/4" larger. Designed to evenly distribute tension force . Work well in many different applications with a high mechanical load .

Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.

Rounded Oval, 8-1/2"W x 11-1/4"L x 5-1/4"D, 1" Flange, 1-1/2" Drain from AMBASSADOR MARINE
Made from 304 stainless steel and mirror-polished to a deep luster, these sinks incorporate SoundKOTE Noise Reduction Technology to reduce the unpleasant clanging associated with many metal sinks. Flanges permit over- or under-the-counter mounting. Low-Profile 90° drains fit standard 1"ID hose and are slanted to maximize drainage.

Magnetic Clasp, 40#, 1 1/4" x 1 1/8" x 1 1/4" from TACO PRODUCTS
Stainless Steel Magnetic Clasps for 3/4" thick surfaces.

5/32'' X 2'' Cotter Pins 3 Pack from WEST MARINE
Assorted packs of stainless-steel cotter pins.

5/8" Clevis Pin dia., 1-3/16" inside dia., 4-pack from WEST MARINE
Stainless-Steel Cotter Rings.