Top Sellers
Kit-Cylinder O/B SI from TELEFLEX
Outboard Cylinders fit most large outboards. Standard side-mount cylinder is an affordable alternative to front mount cylinders. It's easy to install and can be installed in shallow splashwells and on engines fitted with power steering. Can be used with single or twin outboards. Extends about 13'' to the right of the motor tilt tube.
|
Antifreeze & Coolant, 55 Gallons from SEAFIT CHEMICALS
Ideal for all engine usesA nontoxic, virgin propylene glycol formula for superior engine protection during storage or operation. Inhibitors protect against corrosion, and additives help prevent breakdown at high temperatures. We do not recommend usage at full strength in engine systems. Not for use in potable water systems. Use as a coolant in the summer and as antifreeze in the winter. Special additives guard against slime and scale. Not recommended for use full strength in engine systems.
|
Stainless-Steel Destroyer Wheel from SCHMITT MARINE STEER
This stainless-steel steering wheel has an oval shaped 15" diameter rim provides easy gripping. Solid stainless center cap, for Morse and Teleflex steering systems. Non magnetic––will not alter compass readings. Five spokes. Rim Diameter: 15". Rim Material: Stainless Steel. Spokes: Five. Dish: 10°.
|
The Rack Steering System, 17' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 14' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 11' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 15' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 18' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 19' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 13' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 16' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
The Rack Steering System, 20' Cable Length from TELEFLEX
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash. Uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core. Includes rack helm, 90° bezel, bezel kit, steering cable with stainless steel output end. Steering wheel and link-arm kits sold separately. Boat Type: Virtually all power assisted stern drive boats . Turns Lock-to-Lock: Four . Dimensions: 6 1/2"D from dash front, 28 1/2"W .
|
Safe-T Quick System with 8' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 17' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
Safe-T Quick System with 12' Cable from TELEFLEX
Rotary three-turn steering kit with a quick connect cable set up to cut down on installation time. This system works on most boats with power steering assist, inboards and small outboards under 50hp where NFB isn't required. Boat Type: Virtually all power-assisted outboard, stern drive, and inboard boats . Steering Type: Rotary . Turns Lock-to-Lock: 3 . Dimensions: 4-7/8"D behind dash front x 6-7/8"W x 5-5/16"H . Steering Wheel: Up to 16". Not included .
|
|
engine systems wheels and steering acc.
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
New asymmetrical wheel is perfect for hydraulic steering applications. Fits most pontoon, hydraulic steering, aluminum, bass boat applications. Rim Diameter: 13. 5" . Rim Material: Sof-ttouch vinyl . Spokes: Three . Dish: Shallow dish .
Part No: MOD1691H2BLK
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Folletto wheels feature modern styling that will enhance the look of any power boat. The 3/4" tapered hub fits most steering systems. Brushed aluminum spoke. Black polyurethane grip. 13-3/4" Diameter.
Part No: PU023101
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Fantasy wheels feature modern styling that will enhance the look of any power boat. The 3/4" tapered hub fits most steering systems. Black aluminim spoke. Black polyurethane grip. Burlwood inserts. 13-3/4" Diameter.
Part No: PU011111
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Classic Italian styling at an affordable price. Our Fantasy wheels feature modern styling that will enhance the look of any power boat. The 3/4" tapered hub fits most steering systems. Brushed aluminum spoke. Black polyurethane grip. 13-3/4" Diameter.
Part No: PU013101
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
This highly polished deep spoke wheel will complement the look of any center console boat. Ergonomic finger grips and knob give you additional control and comfort. Available in 13" and 15" diameters. Rim Diameter: 15" or 13" . Rim Material: Stainless steel . Spokes: Three . Dish: 22° .
Part No: WM7101321FGK758
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Twin races full of super-smooth ball-bearings makes quick turns effortless while backing down on a fish, docking or maneuvering in tight quarters. Easy installation gets you out on the water quickly with the ultimate in steering control.
Part No: 967-18BL
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Forget about straining to tilt your manual lift motor. Constructed of 304 stainless steel and anodized aluminum tubing and castings, this leverage tool adjusts to fit motors to 40 hp. All contact points are rubber-coated to protect the engine shroud.
Part No: 71036:01
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Adheres directly to the wheel hub and works by gravity. No cables, adjustments, or electricity required. Intended for wheels that are mounted close to vertical.
Part No: 385
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Extension Handles
The HelmsMate is designed with a lock-button mechanism that allows you to extend the handle from 36"–53", so you can sit forward of the motor for better balance, without having to lean back and suffer any loss of control. Constructed of lightweight, corrosion-free aluminum. Swivel model also features a lockout sleeve that slides over the U-joint to convert it back to a conventional straight handle. The handle is easy to attach with a quick-disconnect thumbscrew.
Part No: 001.1
|
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.->Extension Handles
The HelmsMate is designed with a lock-button mechanism that allows you to extend the handle from 36"–53", so you can sit forward of the motor for better balance, without having to lean back and suffer any loss of control. Constructed of lightweight, corrosion-free aluminum. Swivel model also features a lockout sleeve that slides over the U-joint to convert it back to a conventional straight handle. The handle is easy to attach with a quick-disconnect thumbscrew.
Part No: 001.0
|
|
|
Home -> Engine Systems -> Steering Systems -> Wheels And Steering Acc.
Chrome-plated zinc fairleads for tiller ropes. Vertical orientation. 1 1/4'' x 3/4''.
Part No: 1256DP0CHR
|
|
