Top Sellers
Delrin Sheave, 1/2" Max. Line Dia., 1-7/16" OD, 3/8" ID, 5/8" Width from SCHAEFER
Schaefer sheaves are designed to be compatible with Schaefer products, and are not intended for use in other manufacturer's blocks. Delrin sheaves are injection molded with UV inhibitors and monitored molding cycles for a stronger product.
|
300 Series Fairlead Block, Fixed Style, 2-7/32" x 3/4" from SCHAEFER
Same as the Schaefer 200 Series fairlead blocks, but with twice the working load. Use #10 fasteners. Configuration: Lead block. Sheave: UV-stabilized white Delrin®. Ball Bearings: Delrin. Sheave Size: 1-7/16" (37mm). Line Diameter: 7/16". Cheek Material/Finish: Polished stainless.
|
Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.
|
|
|
Gate Brace from SCHAEFER
Heavy-duty 1" stainless stanchion tubes have integral top caps and accept coated lifeline wire up to 5/16" oval dia. Rugged stainless base is canted 5° inboard to match most deck cambers. 5/16" welded rod reinforcement doubles as a bail for snatch blocks, etc. The gate brace mounts midway up the stanchion and has a welded base canted 60° for extra support at gate openings.
|
|
|
Fastpin, 3/8 D X 1.5 SS from SCHAEFER
Stainless steel detent pin with ring is designed for shear applications. Spring-loaded balls staked in, exert enough pressure to prevent accidental release. Quick-one handed insertion or release Grip length is distance from locking ball to ring Sold individually Made in U. S. A.
|
1"W x 8"L Tang from SCHAEFER
High-quality stainless steel tumbled and polished.
|
1/4" Dia. Stamped Halyard Shackle, 1,000SWL from SCHAEFER
Stamped Halyard Shackles haveflared heads with cross pin retainer for attachment to rope. Captive design prevents accidental opening Quick release pin #93-42 - 1/4" Shackle Pin dia. , 1/2" Inside Width, 1,000 SWL #93-45 - 5/16" Shackle Pin dia.
|
1-1/2" Traveler Track End Stop from SCHAEFER
Stop-End Traveler 1. 5in|Stop-End Traveler 1.
|
Mainsail Feeder from SPINLOCK
Graphite-loaded, anodized alloy rollers guide the bolt rope making heavy, stiff mainsails easy to hoist. 3/32" gap fits bolt ropes to 7/16"dia. Easily installs and may be repositioned via two flathead screws which tighten a 3/8"dia.
|
|
Feeder SCHAEFER
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Jib Furling Systems
Using a combination of smooth-rolling Torlon® bearings and a round headstay extrusion centered on the headstay, Schaefer has reduced the effort necessary to roll up a genoa relative to competitive furlers. increases mechanical advantage making furling easier. Open cage design for easy inspection and maintenance. Polyethylene bearing liners stop corrosion and promote smooth furling. Use Norseman or Sta-Lok fittings for easy installation over your existing standard wire headstay and turnbuckle.
Part No: 1100-WL
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Snapfurl Small Boat Furling/Reefing System
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
Part No: CF-700
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Jib Furling Systems
Using a combination of smooth-rolling Torlon® bearings and a round headstay extrusion centered on the headstay, Schaefer has reduced the effort necessary to roll up a genoa relative to competitive furlers. increases mechanical advantage making furling easier. Open cage design for easy inspection and maintenance. Polyethylene bearing liners stop corrosion and promote smooth furling. Use Norseman or Sta-Lok fittings for easy installation over your existing standard wire headstay and turnbuckle.
Part No: 2100-WL
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Furling Accessories
Stainless steel feeder for all systems. Aligns 35-#8 luff tape prior to entering the main feeder on the extrusion foil. Welded bail for shock cord or line to keep the feeder near the headstay. 5/16" dia.
Part No: 76-30
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Snapfurl Small Boat Furling/Reefing System
" Small boat furler comparison, Practical SailorSnapFurl systems come in two sizes to accommodate boats 16' to 24' and boats 24' to 28' and represents the latest in quality Schaefer design and engineering. The efficient Round Geon™ PVC foil snaps quickly and easily around your boat’s existing headstay without the need for special tools or modifications to the rig. System SnapFurl CF-500 for Boats 16’ to 24’ (4. Long fiber reinforced injection molded components make SnapFurl CF 500 unique.
Part No: CF-500 **
|
|
|
|
Home -> Sailboat -> Headsail Furling
A more aerodynamic shape provides a 9% increase in lift and faster flow reattachment due to reduced turbulence. The fine finish and custom polycarbonate construction reduces friction between the foil and the sail. Stainless steel feeder is designed to be snag-free so spinnaker sheets won’t get hung up at the worst possible moment. The overall length is 46' to fit a maximum headstay length of 50'. Maximum headstay diameter is 5/16". Uses 5/32" luff tape. Weight is just 0.
Part No: A-1706-46
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Jib Furling Systems
Using a combination of smooth-rolling Torlon® bearings and a round headstay extrusion centered on the headstay, Schaefer has reduced the effort necessary to roll up a genoa relative to competitive furlers. increases mechanical advantage making furling easier. Open cage design for easy inspection and maintenance. Polyethylene bearing liners stop corrosion and promote smooth furling. Use Norseman or Sta-Lok fittings for easy installation over your existing standard wire headstay and turnbuckle.
Part No: 3100-WL
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-030-01
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-030-03
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-035-03
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-018
|
|
|
|
|
Home -> Sailboat -> Headsail Furling -> Headsail Furling->Standard Toggles/Links
Features include: Anodized aluminum and polished stainless steel provide strength, durability . increases mechanical advantage making furling easier . Open cage design for easy inspection and maintenance . * Not on System 750 A complete system consists of a furler drum and tube package and a matching toggle and link, either standard or long (sold separately). Systems without mechanical fittings are designed for rod or pre-swaged wire headstays; we recommend assembly by a professional rigger.
Part No: 46-016
|
|
|
