Top Sellers
1/8" Endura 12 Dyneema Single Braid, 2,100lb. Breaking Strength from NEW ENGLAND ROPES
Extremely high strength-to-weight ratio! Excellent strength-to-weight ratio, ultra-low elongation, excellent flexibility and wet/dry strength retention, torque-free, and it floats. Constructed from Dyneema SK-75, Endura 12 has a proprietary urethane coating for improved abrasion resistance. Best Use: Halyards, sheets, low-stretch control lines, guys, slings/hoisting ropes . Construction: 12-strand single braid . Core Fiber/Construction: Coated Dyneema SK-75 . 0% at 30% of breaking strength .
|
The Original Doel-Fin Hydrofoil from DAVIS INSTRUMENTS
Get your boat on a plane quickly by increasing the lift generated by the engine. They also allow you to go more slowly while still remaining on a plane, so fuel consumption is decreased. The injection-molded tenite polypropylene fins install easily on the cavitation plate of most outboards from 5 hp and up . Includes Mounting hardware .
|
SeaFin Teak Oil - Quart from DALY'S SEA FIN
High-quality penetrating oil dries to a low sheen. Seals and protects interior and exterior wood from moisture and weather.
|
Large Dinghy Snatch Block, 9/16" Line Dia., 40mm Sheave Dia., 1300 SWL from HOLT ALLEN
Glass-filled nylon cheeks with 316 stainless straps increase working efficiency more than 50% with minimal weight increase. Stainless ball bearings in a polypropylene cassette. For spinnaker sheet, jib sheet turning blocks, etc. Cheek Material/Finish: Glass filled nylon. Ball Bearing: Stainless ball bearings. Opening: Hinged cheek/axle.
|
Auxiliary Outboard Bracket, 9-1/2" Vertical Lift, 7.5hp-30hp HP Rating from GARELICK
Built extra-tough and extra-wide for secondary engines including new higher-torque, four-stroke engines. Stainless torsion springs for easy lifting. Mounting board is 2" weatherproof and maintenance-free polypropylene. Five-position lock bar allows for better range trim adjustment. Maximum Weight: Model #193328: 169 lbs. , Model # 3683455: 175 lbs. . Style: Adjustable . Material: Anodized aluminum body w/ poly-propylene board . Attachment Method: Thru-bolt, backing plate .
|
Medium Trapeze Harness, 5'7"–5'10" Wearer Height, 38"–40" Wearer Chest Size from GILL INTERNATIONAL
Worn by many top sailors around the world, the spreader bar on this harness positions the weight over the hips, reducing painful pressure points and increasing comfort during long periods in the harness. Features the RWO “QRH” pushbutton Quick Release Hook for safer trapezing. Includes multiple adjustment points and a padded lumbar support.
|
Windex 15 Wind Indicator from DAVIS INSTRUMENTS
Improved with bird-proof spike Super-sensitive to slight changes in wind direction at the masthead, Windex Wind Indicators are popular around the world because they offer such an exceptional value. They feature sapphire jewel suspension bearings, large fin/low inertia vanes and easy-to-read, fully adjustable tacking-tab system for quick reference. The choice for most sailors, the Windex 15 features a 15" vane and reflectors for high visibility day and night.
|
West Marine/SOSpenders PFD Rearming Kit, 3/8" Threaded Cylinder Neck Dia. from WEST MARINE
West Marine/SOSpenders PFD Rearming Kit Style: Automatic. Cylinder Weight: 38g. Cylinder Neck Diameter: 3/8" or 1/2" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: West Marine/SOSpenders PFD . Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
29mm Carbo Clew Block Assembly from HARKEN
From the folks who invented ball bearing blocks, this line of blocks boasts an excellent strength-to-weight ratio. 29mm doubles and triples feature a U-lock to hold the swivel in the front or side position, or allow it to spin freely. Use the 40mm blocks for jib and mainsheet systems on high-performance dinghies, and for high-load control lines on small keelboats. The 57mm blocks have an enormous working range that makes them ideal for main and jib sheets, spinnaker halyards and control lines.
|
12 Gallon Topside Fuel Tank from MOELLER
Made from marine grade cross-linked polyethylene for light weight and durability, all tanks are USCG, NMMA and ABYC compliant. Mechanically vented cap floats, and is easy to grip, with ribbed design. Tank includes 90° 1/4"NPT Moeller patented “Poplock” aluminum withdrawal elbow. It swivels 360° without losing its seal. Injection molded 2 1/4" fill neck with gauge and vent. 43"L x 15"W x 6"H.
|
1/8" Single Braid, 2300lb. Breaking Strength, Green from SAMSON ROPE
The high-strength, low-stretch equivalent to wire rope with seven times less weight! Combined with flex-fatigue and service life durability, Amsteel 12-strand Dyneema SK-75 single braid can outlast wire rope and has none of the handling and safety issues associated with wire. Stretch: 0. 70% at 20% of breaking strength. Best Use: Cascade systems, replacements for wire halyards, tapered sheets, backstays, runners, checkstays and strong ultralight rigging . Construction: 12-strand single braid .
|
Mast Hound, 3IN X 4 1/2IN from RONSTAN
A simple effective fitting for terminating wire rigging. 304 Stainless. Fits masts 3" -4. 5" dia. Weight 3. 9oz.
|
Series 60 Orbit Block, Single Light-Load, 2-3/8" Sheave Size, 1,710lb. SWL, 4.7oz. from RONSTAN
These exceptionally strong blocks feature the performance Orbit sheave with captive Acetal ball bearings for side thrust loads, eliminating the need for side retainer plates. The 75mm webbing block (RF79107) can be used where swivel head and shackle attachment is not required to achieve further weight savings. Sheave Size: 2-3/8" (60mm) or 3" (75mm). Line Diameter: Series 60: 1/2" (12mm), Series 75: 9/16" (14mm). Cheek Material/Finish: Anodized aluminum.
|
West Marine SOS Kid’s Hybrid Rearming Kit from WEST MARINE
West Marine SOS Kid’s Hybrid Rearming Kit Style: Automatic. Cylinder Weight: 12g. Cylinder Neck Diameter: 3/8" threaded. Inflator Type: Halkey-Roberts. Kit Contents: Cylinder, green pin, bobbin. PFD Brands Commonly Used With*: SOS Kid’s Hybrid. Inflator Number: V85000. *The column "PFD Brands Commonly Used With" is not all inclusive. Rearming Kits may be used with other brands and vests.
|
Mushroom Anchor, 8lb., Black from GREENFIELD PRODUCTS
The ideal size and weight for skiffs, canoes, inflatables and other small boats in calm waters.
|
|
Finned Downrigger Weights, Canon Usa Finned Downrigger Weights
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295180
|
|
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295002
|
|
|
|
Fishing->Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb. weights.
Part No: 2295182
|
|
|
|
Home -> Fishing -> Fishing Accessories -> Downriggers->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295190
|
|
|
|
Home -> Fishing -> Fishing Accessories->Finned Downrigger Weights
Designed to track straight and true. Flash attractant tape on fin surfaces. Available in 4lb. , 6lb, 8lb. , 10lb. , 12lb.
Part No: 2295184
|
|
|