Welcome! Please Sign-In
Top Sellers
36" Stabilizer for 30'+ Boat Size from MAGMA PRODUCTS
36" Stabilizer for 30'+ Boat Size from MAGMA PRODUCTS
This proven, hinged wing design operates without noisy flapper valves for quiet anchoring day and night. Sailors can easily suspend the stabilizer from their boat’s boom or spinnaker pole. Powerboaters can deploy it with the optional telescoping, aluminum outrigger. The outrigger includes Dacron support lines, a soft rubber hull pad, and an anodized mounting boot. Stabilizer includes bridle and storage/carry case. Stabilizer measures 36" x 21" when fully open, which creates 756sq.
Propane Storage Locker Bag from MAGMA PRODUCTS
Propane Storage Locker Bag from MAGMA PRODUCTS
propane bottles outside of your boat for safety.
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.
Folding Teak Pedestal Table from SEATEAK
Folding Teak Pedestal Table from SEATEAK
Teak tabletop measures 16"W x 25"L closed and 32"W x 25"L open and has a fold-down support leg. A built-in drink holder that accommodates four glasses, or binoculars and two glasses. Clips mount the unit firmly to all pedestal guards, whether expanded or collapsed, so there's no drilling. (Note: the steering post must not protrude beyond the front of pedestal guard or the table will not be able to clip properly to the guard. Includes installation hardware.
Motor Mate Lifting Davit from FORESPAR
Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.
GlobalFix™ iPRO Category II GPS-Enabled EPIRB from ACR ELECTRONICS
GlobalFix™ iPRO Category II GPS-Enabled EPIRB from ACR ELECTRONICS
The screen shows GPS LAT/LON, operating instructions, usage tips, transmission bursts as well as battery power. Self-testing your beacon is simple and easy to understand, with the iPRO digital display visually guiding you through the self test step by step. The GlobalFix™ iPRO is also the first EPIRB that offers Dual GPS Technology. Interface your iPRO to your onboard GPS to ensure that your LAT/LON is stored inside so your precise coordinates are transmitted in the first data burst.
3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
3/4" NPT ARG Water Strainer with Plastic Strainer Basket from GROCO
The first line of defense to your engine’s cooling system. Well-made traditional bronze strainer head. No leaks under pressure or vacuum. Cast mounting brackets. Mounting system allows removal of the strainer without tools. Buna-N “O-ring” seal at strainer cap.
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .
Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate I™ SOLAS Vest, Standard from STEARNS
Ocean Mate™ I Type I flotation device complies with SOLAS 83 requirements. Minimum of 18 lb. buoyancy (child). Reversible offshore PFD designed for quick donning . 3M Scotchlite Reflective Material SOLAS-grade 6755 on panels . Stackable for easy storage . Heavy-duty stainless steel hardware with an attached SOLAS whistle . Light storage pocket .
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.
Mounting Plate for Size #40 Winches from HARKEN
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

First Mate Dual Mount Cutting/Serving Tables, Magma Products First Mate Dual Mount Cutting/Serving Tables

Dual-Mount Fillet Table - Lg; 12 1/2" x 51" from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-505
Dual-Mount Fillet Table - SM; 12 1/2" x 31" from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-503
Dual-Mount Fillet Table - Md; 12 1/2" x 41" from MAGMA PRODUCTS Home -> Cabin & Galley -> Barbecues & Tables->First Mate Dual Mount Cutting/Serving Tables
The dual-mount gives your table the strength of a workbench with the convenience of Magma's quick-mount system for compact storage. FDA-approved and UV-stabilized high-density polyethylene won't mildew or absorb orders and cleans easily. These larger tables feature overboard drainage slots, two filet knife holders and pliers holder. Requires Dual-Mount kit for complete installation (sold separately). Table Function: Bait/Fillet/Food Service. Material: UV Stabilized High-Density Polyethylene.
Part No: T10-504
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics12