Portable Gunwale-Mount Boarding Ladder, 3 Steps, 11" Gunwale Width from WEST MARINE
These portable ladders hook right over your boat’s gunwale with a hull hugging design and ladder standoffs for added safety. Thick non-skid steps feature an Ultra Traction tread that’s kind to your feet. Keep one accessible on board your boat for swimming, skiing and emergencies. 225lb. Mounting Style: Hook over gunwale . Material: Heavy-duty 1" aluminum tubing, vinyl hooks and step treads . Dimensions: 3-step: 36"L x 15"W; 4-step: 48"L x 15"W .

Gusher MKIII Cabinet-Mount Foot Pump, Right-Handed from WHALE PUMPS
This surface-mounted pump can be placed inside or outside a locker. Discharges on each stroke and self-primes (to 7' max. height). Offered in “Right” and “Left” configurations to suit installation clearance requirements. For freshwater or saltwater. gpm: 4. 3 . Dimensions: 5-1/8"H x 5"W x 3-5/8"L (excludes 4-1/8" foot pedal) .

Starboard Side Green Vertical-Mount Side Navigation Light, 3-5/8”H x 4-1/8”W from PERKO
European style Series 170 side navigational lights are certified for use on powerboats and sailboats up to 20m (or 65. 6') with 12V electrical systems. Red or green lenses with 12V bulbs included. 2nm visibility range. Case Material: Chrome-plated brass tops with black plastic bases . Mounting Hardware: #10 FHMS (sold separately) . Volts: 12V . Draw: 0. 97A . Replacement Bulb: Model 8646853 .

Rail Mount Outboard Bracket, 10 1/2" from WEST MARINE
Keep your small outboard safe and upright on the stern rail, rather than stowed in a locker where gasoline from the tank could cause hazardous fumes to collect, or spill and ruin stored goods. Two-piece mounting blocks clamp around a 1'' O. D. rail ''T''. Holds outboards up to 8 hp. Each comes complete with stainless mounting bolts. UV-stabilized polypropylene.

Mounting Plate for Size #40 Winches from HARKEN
Winch Mounting Plates.

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

A. Centerpin BNC/RG58AU Coax Connector from SHAKESPEARE ELECTRON
Centerpin® solderless gold-plated connectors A novice can install the new Centerpin® Coaxial Connector flawlessly, in a matter of seconds with a standard pair of needle-nose pliers. . Eliminating the steps of measuring, stripping and soldering that often lead to installer error has been eliminated. . 24kt gold corrosion protection. . Standard Gold-plated connectors and adapters Gold plated fittings exhibit superior conductivity and are less vulnerable to corrosion in the marine environment.

Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).

Standard Transom Mounting Bracket from GARELICK
Identical to the mount included with each ladder. Permits multiple mounting locations on your boat. Includes 1" thick poly spacer with 10° angle, lock and stainless face plate. 2. 75" W x 3. 62" H.

Gunwale Mount Pontoon Ladder, 4 Step from GARELICK
For use on pontoon boat side gates. Special vinyl sleeves between the first and second step protect the pontoon from damage. The overrail hooks snap into amounting sockets (included) suitable for temporary or permanent mounting. Made of durable 1''dia. aluminum tubing with comfortable white molded plastic steps. Hooks fold flat for compact storage. Four steps. 50''L. Hooks:13.

Fluke-Style Anchor Rail Mount from SCHAEFER
Safe off-the-deck stowage for Danforth-style anchors to 22lb. This anchor mount enables secure, off-the-deck storage and quick deployment of Danforth style anchors from 8-22 pounds. Mounts onto 1" diameter horizontal bow or stern rails and features a quick release mechanism with a locking hole to prevent accidental release. Closing latch enables one hand anchor engagement. 304 stainless steel.

Type IV Standard Buoyant Cushion - White from KENT
Conventional throwable cushions meet USCG requirements for Type IV PFDs. Comfortable to sit on or to use as a backrest. Durable fabric covers. Heavy polypropylene straps make them easy to throw. Buoyancy: 18 lbs. Dimensions: 15"L x 16"W x 2. 5"H.

1-7/8" Brass Standard Hasp from ABI
Highly polished brass . Fixed eye (does not swivel). 1"w x 1-7/8"L. Padlock hole diameter 5/16" .

Recess-Mounted Dry Roll Covered Tissue Holder from OCEANAIR
Watertight design and automatic rewind ensure that your toilet tissue stays dry. Smooth textured ABS plastic. Accepts standard toilet tissue rolls.