Welcome! Please Sign-In
Top Sellers
1/4" - 5/16" Anchor connector from WEST MARINE
1/4" - 5/16" Anchor connector from WEST MARINE
Cleaner than standard anchor shackles, an anchor connector pulls easily over bow roller. Attaches with an Allen wrench (Included) . High-grade galvanized steel . Safe Working Loads: 1/4" - 5/16" unit: 1,390lbs.
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Box Anchor, Large, Offshore Boat to 40', Cabin Cruiser to 32', 25lb., 25"H x 9.5"L x 5.5"W Collapsed, Stainless from SLIDE ANCHOR
Recommended for protected waters or beach use, this anchor’s unique shape enables it to set in most bottom types with half the rode normally needed for conventional anchors. Its fixed scoop design and narrow side panels set like a “cookie cutter” into sand, mud, grass or rock. A stabilizing bar and spring make it easy to lock the anchor open for use or collapse it for storage. Stainless-steel version is cast and polished 304 stainless. Style: Box . Material: Galvanized steel/stainless steel.
30lb. River Anchor from GREENFIELD PRODUCTS
30lb. River Anchor from GREENFIELD PRODUCTS
Combines the features of a traditional mushroom anchor with flukes for better bottom penetration. PVC coating is easy to clean and won’t scuff your boat. Recommended for use in protected inland waters only.
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
45lb. CQR Anchor, Boats 32'–58', 40-5/8"L x 14"W x 17"H from LEWMAR
The legendary Lewmar plow anchor stays put, won't breakA favorite among bluewater cruisers for its strength and performance in a wide range of bottom conditions. Excellent penetration in sand, weeds, rocks and mud. Trouble-free anchor roller stowage. Attach a trip line to the eye on the horn for easy break-out. Hinged shank prevents breakout during wind shifts. Forged steel construction. Lifetime warranty against breakage. Material: Galvanized Steel . Application: Sand, Rock and Grass .
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
Chrome Sand Spike Anchor from MARINETECH PRODUCTS
An alternative to more expensive beach and land anchoring devicessimply push this rod into the ground, or use a hammer in firmer soils and attach an anchor line to the attachment loop.
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Stainless-Steel Horizon™ Claw Anchors 11lb. 15'-25' from LEWMAR
Made of precision-cast 316 stainless steel, these claw anchors are patterned after anchors developed to secure oil rigs in the North Sea. Extremely effective in a variety of sea beds, tides, and wind conditions. Reset fast if they become dislodged due to changing conditions. Stows conveniently on the bow roller of most boats.
Mighty Mite Anchor 12 - Boat 18 to 24 feet from KENRICK MANUFACTURIN
Anchor, Folding Grapnel 3 LB. from SEAFIT
Anchor, Folding Grapnel 3 LB. from SEAFIT
Ideal for small boats and dinghies-it folds and unfolds in seconds and stores compactly. Rerieving line ring included.
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Rail Mount Anchor Bracket, Horizontal from WINDLINE
Stow your anchor up off the deck, ready for instant deployment. These brackets hold fluke-style Danforth, West Marine, U. S. anchors up to 35lb. and all Fortress anchors (except those with mud palms).
Danik Anchor Hook from SLIDE ANCHOR
Danik Anchor Hook from SLIDE ANCHOR
Perfect for attachment to a bow eye or sand spike, this combo carabiner/ cam cleat eliminates the periodic hassle of correcting and retying your beach or anchor line. Just pass the line through the cam cleat and pull tight. Made of 304 stainless steel. For boats to 6,000lb. that anchor in protected waters. For use with 3/8"-5/8" line, sold separately. Holds up to 8,000lb.
Danforth Hi-Tensile Anchor - 20 lb for 30-36' Boats, 2,500 lb SWL from TIEDOWN ENGINEERING
Danforth Hi-Tensile Anchor - 20 lb for 30-36' Boats, 2,500 lb SWL from TIEDOWN ENGINEERING
For excellent holding power on sand and mud bottoms Extremely tough, durable anchor built from high tensile steel for excellent holding power in sand and mud bottoms. T-shaped flukes are constructed of Junior I-beam steel for greater strength and stability and beveled for faster, deeper penetration of bottom substrate. Hot-dip galvanized for long-lasting corrosion resistance. Style: High-Strength Pivoting Steel Fluke. Application: Sand or Sand/Mud Bottoms. Pros: Original Danforth dimensions.
100' Anchor Rode from MARINETECH PRODUCTS
100' Anchor Rode from MARINETECH PRODUCTS
These super flexible nylon anchor lines are designed for trailerable watercraft up to 26'.
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
Swivel Anchor Connector, 5/16"–7/16" Chain, 2750lb. SWL from WEST MARINE
18-8 stainless swivel connectors prevent snagging at the anchor/chain connection, slide easily over anchor rollers and prevent the chain from becoming twisted while the anchor is set. Attach with a single set screw (using the Allen wrench included).
Large Anchor & Rode Bag from WEST MARINE
Large Anchor & Rode Bag from WEST MARINE
Anchor Bag Durable mesh bag provides a convenient and tangle-free place to store your anchor rode. A number of features add to the life of your rode and make it easier to deploy. The wide mouth is held open with an internal stainless steel ring, but closes easily with a drawstring. . Mesh ends dry quickly and a reinforced slit in the bottom allows the bitter end to be passed outside the bag for securing. Brass boat snap allows you to hang the bag and rode where they’re most convenient.
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
Anchor Buddy Mooring Line, Blue from GREENFIELD PRODUCTS
The anchor rope that stretches Rope-covered bungee cord stretches from 14' to 50'. Anchor with Anchor Buddy, drive to shore, tie up boat securely to land and let the Anchor Buddy stretch cord pull it back out from shore for safe moorage.

Fortress Anchors Fortress Aluminum Anchors

47lb. Aluminum Anchor for 59–68' Boat, Replaces 70–90lb. Steel Anchor, 51"L x 41"W Stock, 30" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-85
32lb. Aluminum Anchor for 52–58' Boat, Replaces 50–65lb. Steel Anchor, 46"L x 37"W Stock, 27" Fluke Length from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors->Fortress Aluminum Anchors
Lightweight, fast-setting and reliable, this anchor gets fan mail Fortress anchors let you choose between two shank angles to provide outstanding holding power in two common seabed types—a 32° angle for sand, or a 45° angle for soft mud. Precisely machined interlocking components made from high tensile aluminum-magnesium alloy have no welds to weaken the metal. The alloy is extremely strong, corrosion-resistant, nonmagnetic and light. Style: Pivoting aluminum fluke .
Part No: FX-55
Guardian Anchor 7lb for Boats 28-33' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-16
Guardian Anchor 2.5lb for Boats 12-16' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-5
Guardian Anchor 6lb for Boats 23-27' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-11
Guardian Anchor 65lb for Boats 63-72' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-125
Guardian Anchor 42lb for Boats 54-62' from FORTRESS ANCHORS Home -> Anchor & Docking -> Anchors -> Basic Pivoting Fluke Anchors->Guardian Aluminum Anchors
An easy-to-handle alternative to heavy steel anchors, Guardians feature lightweight, corrosion-resistant, aluminum-magnesium construction and a precise 32° fluke angle. Components are not anodized and are slightly smaller. But just like the Fortress, the weldless design maximizes strength and they easily disassemble for compact storage or parts replacement. Style: Pivoting aluminum fluke . Material: High tensile aluminum-magnesium alloy . Application: Sand and mud .
Part No: G-85
   Company History
   Mission Statement
   Press Room
   Careers at West Marine
   Affiliate Program
   Annual Catalog
   Store Locator
   And More...
   Stock Price
   Press Releases
   SEC Filings
   Email Alerts
   Analyst Coverage
   Management Team
   Financial FAQ
   And More...
   Terms Of Use
   Returns/Exchanges
   Privacy Policy
   Contact Us
   Site Map
   Annual Catalog
   Product Recalls
   And More...
Product offering and prices listed on this website (www.westmarine.com) are limited to Internet and phone orders (1-800-BOATING). Prices on periodic web-only specials apply only to Internet orders. Product offering and/or prices may vary at West Marine retail stores. ©2009 West Marine | All Rights Reservedpics11