Auxiliary Steering Kits for Trolling Motors - Zinc Rod from MARINETECH PRODUCTS
Steer your trolling motor with your boat's main steering wheel. These connector rods attach the trolling motor directly to the main engine—when the big one moves, the little one moves along with it. Kits come complete with two quick disconnect ball joint assemblies which make taking it off when you don't need it easy. Connect rod length is 24", cut it to size for a perfect fit. Use the drive bracket for motors that have SeaStar or Teleflex steering.

Transom Adapter for Bracket from FULTON
Lets you remove your outboard bracket and outboard for security and less stress and fatigue on the transom while trailering. A locking device helps theft-proof motor and bracket. Heavy-duty marine-grade aluminum with stainless steel mounting bolts supplied. For Adjustable Brackets above (Models 380321 & 389866).

Whale Swim 'N' Rinse Transom Shower from WHALE PUMPS
Whale Swim 'N' Rinse Transom Shower Add the convenience of a hot and cold shower to your transom. The easy-to-install shower connects directly to the Whale Quick Connect 15 mm freshwater system. Durable, ABS plastic housing with cover hides the shower when not in use. 7' retracting hose . Water conservation control on the handset . Base plate: 6-1/2" x 11-1/2" . Allow 3-1/2" behind surface .

Johnson/Evinrude, motor only, for 2-wire systems, 90–225hp (1991–1999) from SIERRA
Tilt/Trim Motors, Outboard Applications.

Transom Drain Tube & Plug from MOELLER
This nylon drain tube won't rot, bend or mildew, fits flush to your transom, and allows water to drain when your vessel is trailered. A rubber O-ring makes a watertight seal. Can be loosened with a flat-head screwdriver. Fits 1 1/8'' openings. Mounted with rivets or #8 fasteners.

Rule 500GPH Transom Mount Bait Pump from RULE INDUSTRIES
Transom mounted aerator pumps provide your livewell to have professional aeration without needing to install a pump through your hull. The unique quick-release pump with strainer base assembly snaps easily into the provided transom bracket. At the end of the day, the pump can be removed from storage. Each pump features 6' wire leads. No need to install a pump through the hull. Unique, quick-release pumps with strainer base assembly easily snap into the transom bracket (included).

Bilge Pro Replacement Motor Cartridge for 500gph Pumps from JOHNSON PUMP
In the event of a problem, replacing your cartridge bilge pump motor is easy— provided you keep one of these on hand. Just pop out the old cartridge and pop in the new. Fit Johnson, West Marine Bilge Pro and Mayfair cartridge-style bilge and livewell pumps.

Motor Mate Lifting Davit from FORESPAR
The unit stores in its own 31" (787. Comes with tackle and will lift anything from the dinghy to the cockpit (or vice-versa) up to 100 lbs. Great for the dinghy motor, but also good for scuba tanks, ice, duffel bags, groceries, etc. The Motor Mate uses a Railfast® mounted ring on the rail and a "toe" on the cockpit coaming directly under the rail. Lightweight, portable, compact . Ideal for lifting outboard motors, sea bags, scuba gear . Lifting capacity: 100 lbs.

4-Stroke Auxiliary Outboard Bracket from GARELICK
Gets your motor clear of the water when not in use to eliminate propeller drag and to protect the lower unit. Marine-grade stainless steel and a 2" thick polyethylene mounting board. Brackets adjust to transoms with plus or minus angles from 7° to 35° in 7° increments.

Stern Rail Outboard Motor Mount for 1" Railing from EDSON CORPORATION
Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with nonskid pad, bolted to the UV stable poly backing board always looks shipshape. no more varnishing. Comes complete with hardware to attach to any standard 1'' (2. 5cm) stainless rail. Warning: Be sure the engine is securely tied onto the backing board and the engine mounts are tightened whenever the engine is stored on Edson's Outboard Motor Mount.

Stern Rail Outboard Motor Mount - Aluminum for 1-1/4" Railings from EDSON CORPORATION
Built to hold motors up to 15 hp or 100 lbs/45 kg. Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Bottom cleat comes unattached so that it will fit any rail spacing. Note: 1-1/4” rail version comes complete with anodized aluminum bracket, stainless cleat and stainless U-bolt for 1-1/4” railing.

OSCO GASKET FOR 274147 from OSCO MOTORS CORP.
Fits Osco Motors # 8125 manifold .

Fishing Boat Cover - HS Blue 15'5"-16'4"/65" Beam from TAYLOR
Patterned to fit basic fishing boats with bench seats. (These covers are not patterned to fit over trolling motors. ) The bow and transom corners are reinforced to protect the cover from sharp aluminum edges. Poly Cotton Fabric: Trailerable 65% polyethelyne/35% cotton Breathable Mildew & Stain Resistant Water Repellant Heavy-gauge shock cord in hem 2-year limited warranty Color: Silver Gray. Hot Shot Fabric (HS): Trailerable 100% urethane-coated polyester 7.

2'' Trnsm Ladder Extension Shim from GARELICK
Extends ladder farther off the transom. Use with spacer and face plate included with ladder.

Aluminum Transom Support Master Mounting Kit from TELEFLEX
Universal mount for most outboard engine steering applications. This kit includes the Teleflex Outboard Clamp Block, Support Tube, and the Clevis Kit.