Top Sellers
Fuel Filter Primer Pump Kit from RACOR-PARKER FILTRAT
Prime your fuel line reliably every timeRetrofit this kit to most Racor 1000 or 900 series fuel filters, and you can easily reprime your filter and fuel system. Activate a switch, and fuel is drawn into the pre-screen and pumped through the housing, re-filling the unit. When not in use, the filter pump is bypassed and the fuel/water separator system functions normally. Assembly is only 3. 3" tall .
|
30GPH Cartridge, Replaces Racor S3240 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
60GPH Cartridge, Replaces Racor S3227 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 98. They’re engineered for today’s sterndrives and inboards, along with 2-cycle and 4-cycle outboards. That is why a high efficiency water separating filter is so important.
|
10 Micron Replacement Filter Element for OMC 502905 from SIERRA
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
|
Honda Fuel Line Connector, Moeller 033501-10 from MOELLER
Moeller 033501-10: Male bayonet tank connector, 1/4" NPT, 1991 and newer. Moeller 033496-10: Male bayonet style tank connector with 1/4" NPT, brass. Moeller 033502-10: Bayonet style female tank connector, 3/8" barb, 1991 and newer.
|
Fuel System Treatment & Stabilizer from MERCURY MARINE
Fuel System Treatment & Stabilizer Prevents fresh fuel from degradation and oxidation. 1oz. treats six gallons of fuel. For two-and four-cycle engines. 16oz. plastic bottle.
|
10 Micron Diesel Fuel Filter/Water Separator with Metal Bowl from RACOR-PARKER FILTRAT
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
|
Fuel Filter/Water Separator, 15/35gph Max. Flow, 6"H x 3.2"W x 3.2"D, Metal Bowl from RACOR-PARKER FILTRAT
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
|
Replacement Element for OMC Outboards Only, No Bowl from RACOR-PARKER FILTRAT
Direct replacement for factory filters, only better! Aquabloc® filter medium removes virtually all the water from fuel. Water contamination is separated out and drops into the bowl where a drain plug allows easy, safe removal. Includes filter element and bowl, but not mounting head. Fuel Type: Gasoline. Flow Rate: 60 gph. Filtering Efficiency: 10 micron. Mounting Head: Varying styles for different engines. Inlets/Outlets: Depends on engine manufacturer. Bowl Material: See-through.
|
Fuel Filter Only from MERCURY MARINE
1662576 is a kit for gasoline outboard and MerCruiser models, except 1992 MCM 4. 3L Gen II engines equipped with an in-line fuel filter. 1662550 is an individual replacement element. Model 4531430 is located under the cowl on all Mercury/Mariner V6 outboards, up to 1995, and includes black screw-in sensor. Similar 5037320 is under-cowl filter for Mercury/Mariner V6, 1996 and up, with blue screw-in sensor. OMC model replaces OMC# 502905. Fuel Type: Gasoline. Filtering Efficiency: 25 micron .
|
Rejuvenate 2-Cycle Engine Oil, Pint from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
Rejuvenate 2-Cycle Engine Oil, Gallon from MERCURY MARINE
Rejuvenate is unlike anything on the market today. It rolls back the clock on engines by quickly removing performance robbing carbon deposits while stabilizing fuel. Powerful detergents remove carbon deposits on piston skirt, crowns and under crowns, power valves, cylinder intake, exhaust and heads. For air-cooled or water-cooled 2-cycle engines with premixed fuel or oil injection systems.
|
In-Line Fuel Filter - 5/16 from MERCURY MARINE
An Assortment of Fuel and Carburetor filters for Mercury Engines.
|
Power Tune Engine Cleaner, 13 oz. from MERCURY MARINE
Dissolve gum, varnish, deposits and clogs in the fuel system and combustion chambersScrub carburetors and injectors clean with this detergent cocktail of solvents and motor oil. Fast-acting chemical dissolves gum, varnish, deposits and clogs in the fuel system and combustion chambers. For 2- and 4-cycle engines. 13oz.
|
Fuel System Stabilizer from MERCURY MARINE
Used to prevent fresh fuel from undergoing degradation and oxidation during fuel storage. For use with 2- and 4-cycle engines. 1fl. oz. treats 1gal. of fuel.
|
|
Fuel-Bowl Engine Systems
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Aqua View Replacement Filter Element & Bowl
High-performance fuel injected engines require ultimate fuel filtration, separation of water from the fuel supply and maximum fuel flow. Sierra’s new filter elements deliver all three of these critical performance factors. 7900-Series 10 micron filters eliminate harmful contaminants at over 90% efficiency, while removing over 99% of emulsified water. Today’s ethanol-blended fuels increase the chances of water in fuel tanks, resulting in premature wear, poor performance and component damage.
Part No: 18-7943
|
|
|
|
Home -> Engine Systems -> Engine Parts->MAX Turbine Series Fuel/Water Separators
Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Part No: 75500MAX2
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Diesel Fuel Filters/Water Separators
Racor’s Aquabloc filter media removes virtually 100% of water and solid contaminants. Filters have die-cast aluminum heads and come in different sizes for diesel engines and any rate of fuel flow. To be used on the suction side of the pump. See-thru bowls allow visual inspection for water; metal bowls are recommended for use in areas of high heat and are required by the US Coast Guard on inboard engines and gensets. Inlets/Outlets: 1/4" NPT female . Bowl Material: See-thru polymer .
Part No: 120AS
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 320R-RAC-02
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 900MA2
|
|
|
|
Home -> Engine Systems -> Engine Parts->Fuel and Carburetor Filters
In-Line outboard filters with plastic bowls fit 1/4" or 5/16" fuel lines. Carburetor filters fit Rochester 2- and 4-barrel or MerCarb 2-barrel (Model 1661800) or Rochester 2-barrel w/Carter fuel pump (Model 1661727). Fuel Type: Gasoline . Flow Rate: n/a . Filtering Fidelity: n/a . Mounting Head: n/a . Inlets/Outlets: 1/4" . Element Dimensions: n/a . Bowl Material: Plastic . Drain Fitting: n/a .
Part No: 803897Q1
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->MAX Turbine Series Fuel/Water Separators
Switch to a new filter without shutting down! A single valve on all of the double-manifold MAX models isolates one filter/separator for service while the other keeps operating. You keep running while draining contaminants from the other bowl or changing the filter element.
Part No: 75900MAX2
|
|
|
|
Home -> Engine Systems -> Engine Parts->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 1000MA2
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 500MA2
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Spin-On Series Gasoline Fuel Filter/Water Separators
Racor's famous Aquabloc® filter media separates water into the bottom of the drain bowl and ensures virtually 100% removal of water and solid contaminants. Filters come in different sizes for gasoline engines and any rate of fuel flow. Designed for use on the suction side of pump. All filters feature a die-cast aluminum head which is anodized and painted. Standard pipe-to-hose barbs are used for installation. Inlets/Outlets: 1/4" NPT, except 3/8" NPT on 660 series .
Part No: 409R-RAC-01
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 900FH2
|
|
|
|
Home -> Engine Systems -> Engine Parts -> Fuel & Air Filters->Turbine Series Diesel Fuel Filters/Water Separators
The second stage uses a coalescing ring, which causes the remaining water to form into droplets and fall into the sediment bowl while the dry fuel continues upward. The third stage is an Aquabloc filter, which removes the remaining minute grit. Built-in check valve keeps fuel from draining back into your tank. Fuel Type: Diesel . Mounting Style: Bulkhead mount, cartridge element. Filtering Fidelity: 2 micron, except 30 micron Model 309999 . Drain Fitting: Self-venting . Priming Pump: No .
Part No: 75500FGX2
|
|
|